Skip to content

A RPC based firmware for a Spark Core device (like being connected, but without the wire!)

License

Notifications You must be signed in to change notification settings

canda/voodoospark

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

What is VoodooSpark?

VoodooSpark is a customized firmware build for the Spark Core device to allow a remote interface definition of the firmware API over a local TCP connection. The intent is to allow client-side programs to directly control the Spark Core in real-time regardless of their programming language. The interface exposed is directly mapped to the one provided by Spark available in their docs section.

The VoodooSpark uses the Spark Cloud and its REST API to provide IP address and port information to the local spark core. It will then initiate a direct connection to the host machine, on which will need to be a TCP server. Once the connection has been made, the host machine can drive the Spark Core using the binary protocol defined below to effectively execute firmware API level commands dynamically.

Loading the Firmware

With your Spark device connected to a Wifi network and has already gone through the "claim"/ownership process:

  1. Open the Spark.io Editor with the credentials used when going through the claiming process.
  2. Copy and paste the entire contents of firmware/voodoospark.cpp into the editor window.
  3. Click "Verify"
  4. Click "Flash"
  5. Once the flashing process is complete, close the Spark.io Editor.

Alternately, the firmware may be loaded using the Spark CLI (spark-cli) instead of the Spark.io Editor:

npm install -g spark-cli
spark cloud login
spark cloud flash SPARK_DEVICE_ID firmware/voodoospark.cpp

Now your Spark Core is running VoodooSpark, lets connect to it!

Connecting the Spark Core to You!

The way VoodooSpark works is to use the Spark Cloud as a channel to identify where to initiate the TCP connection to the Spark Device from your host machine.

In order to connect the Spark Core to your computer, you will first need to issue an HTTP GET request to the Spark Cloud. This can be done via any programming language, but for this example we are using a simple CURL command. You will need some information outlined with curly braces below, please note the {DEVICE-ID} and {ACCESS-TOKEN} are available from the Spark.io Editor

curl https://api.spark.io/v1/devices/{DEVICE-ID}/endpoint?access_token={ACCESS-TOKEN}

This should return a JSON document that looks similar to this:

{
  "cmd": "VarReturn",
  "name": "endpoint",
  "result": "192.168.1.10:48879",
  "coreInfo": {
    "last_app": "",
    "last_heard": "2014-05-08T02:51:48.826Z",
    "connected": true,
    "deviceID": "{DEVICE-ID}"
  }
}

The "result" value is the IP address of the Spark Device on your local network and the part after the colon (:) is the port that the server is currently listening on. This port will by default be 48879 (0xBEEF), but can be changed in the voodoospark firmware. Please do not hardcode the port for this reason, rather use the data returned back as the response.

With the IP Address and TCP port information, use your favorite language or TCP client to connect to the device (even telnet will work) and send it the necessary BINARY protocol commands to trigger the desired API interactions as defined in our API Command guide.

How to Debug

In case you want to see what is going inside the VoodooSpark in real-time, we have built in a lot of debug hooks for you. You will need a USB cable and the screen or minicom utilities (one of them) on unix. Modify the firmware loaded in the spark build system to convert the line:

#define DEBUG 0

to the following definition:

#define DEBUG 1

This will enable debug mode, boot a serial port connection on the Spark and present on your computer for you to watch the inside voodoo. Be sure to flash the new firmware to your device, this is very important and easy to miss. Once the flashing finishes, do an

ls /dev

Look for something similar to tty.usbmodem1411 yours may be different, but will be something like tty.usbmodemABCD. Now using your favorite term app connect to that port using the baud rate of 115200.

For screen this command will look like:

screen /dev/tty.usbmodem1411 115200

Reference Implementations

License

See LICENSE file.

Made With Voodoo

This firmware is made and cared for by the following awesome people:

About

A RPC based firmware for a Spark Core device (like being connected, but without the wire!)

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 86.5%
  • JavaScript 13.5%