Skip to content

bmuschko/gradle-kubernetes-plugin

Repository files navigation

WIP: if you would like to help out with the initial development to get this project off the ground please open an ISSUE to ask about what needs to be done or what you would like to work on.

gradle-kubernetes-plugin

Gradle plugin for working with Kubernetes.

Status

CI Codecov Docs Questions Release
Build Status codecov Docs Stack Overflow gradle-kubernetes-plugin

Design Goals

Learning from, and building upon, the work done, lessons learned, and features requested, with the gradle-docker-plugin we sought to create a plugin that was easy to use up front but with the proper hooks/constructs in place to allow for more flexible solutions and complicated scenarios should the developer want to take advantage of them. Things like (but not limited to):

  • CRUD operations around all kubernetes endpoints (e.g. namespaces, services, pods, etc).
  • Dependent libraries loaded into their own class-loader so as not to clobber buildscript classpath.
  • config{} provides a common means of configuring the backing object Tasks are based upon. Instead of exposing every possible property the backing kubernetes-client may provide we instead expose the most common ones and let the user further configure things through this construct should the need arise.
  • retry{} provides a common means of configuring retries for a given Task. The construct itself can be provided globally on the extension point, for all tasks to inherit, or upon each individual task for more granular use-cases.
  • response() hands back to the user, once task execution has finished, the object given to us by the kubernetes-client execution. This allows downstream tasks to query a previously ran Task for its output and potentially design more complicated scenarios with it.
  • reactive-streams gives users a more dynamic experience when working with a give tasks life-cycle.
  • More streamlined, simplifed, and documented codebase allowing for easier contributions from the community.

Getting Started

buildscript() {
    repositories {
        jcenter()
    }
    dependencies {
        classpath group: 'com.bmuschko', name: 'gradle-kubernetes-plugin', version: 'X.Y.Z'
    }
 }

 apply plugin: 'gradle-kubernetes-plugin'

The kubernetes extension point

The kubernetes extension acts as a mapper to the Config object provided by the kubernetes-client library which we use in the backend. This allows you to configure this plugin in exactly the same way you would configure the java client.

 kubernetes {
    config {
        withMasterUrl("https://mymaster.com")
    }
 }

All additional options that exist to configure the client are also honored here.

Tasks

The below table(s) document each of our tasks and their respective features in depth details of which are provided further below. Special care should be taken when using the config{} construct as it's considered an ADVANCED feature and developers should favor using the OOTB inputs/properties of the task itself whenever possible vs configuring things directly on the backing kubernetes-client object.

key table

Column Description
Name Name and hyperlink to Task source.
config{} Object config{} closure maps to.
onNext{} Object next iteration of onNext{} closure will receive.
response() Object response() method returns AFTER task execution has finished.

Client operation **ADVANCED USAGE and doesn't follow Task design patterns

Name config{} onNext{} response()
KubernetesClient KubernetesClient KubernetesClient KubernetesClient

Deployment operations

Name config{} onNext{} response()
ListDeployments MixedOperation Deployment DeploymentList
CreateDeployment DoneableDeployment Deployment Deployment
GetDeployment MixedOperation Deployment Deployment
DeleteDeployment N/A Boolean Boolean

Namespace operations

Name config{} onNext{} response()
ListNamespaces NonNamespaceOperation Namespace NamespaceList
CreateNamespace MetadataNestedImpl Namespace Namespace
GetNamespace N/A Namespace Namespace
DeleteNamespace N/A Boolean Boolean

Pod operations

Name config{} onNext{} response()
ListPods MixedOperation Pod PodList
CreatePod DoneablePod Pod Pod
GetPod N/A Pod Pod
DeletePod N/A Boolean Boolean

Service operations

Name config{} onNext{} response()
ListServices MixedOperation Service ServiceList
CreateService DoneableService Service Service
GetService N/A Service Service
DeleteService N/A Boolean Boolean

System operations

Name config{} onNext{} response()
Configuration N/A Configuration Configuration

Features

This plugin provides various means of configuring, working with, and accessing properties and values of a given Task. Through the use of config{}, response(), and reactive-streams, which are each further documented below, the user is given full access to configure their Task however the choose, have full access to the response or output of a given Task, and be able to work more closely with the life-cycle of a given task.

On config

All tasks, as well as the kubernetes extension point, implement the ConfigAware trait. This in turn exposes the config{} closure allowing developers to further configure said objects. The respective config{} closure maps to the backing/documented object. A typical use-case would be to configure a task like so:

task myCustomNameSpace(type: CreateNamespace) {
    config {
        withName("hello-world") // applying name via `config{}` construct instead of property
    }
}

The config{} closure has its delegate (as well as the first parameter) set to the object you're allowed to configure within a given context. In the example above, and documented in the table below, the CreateNamespace task allows you to configure the MetadataNestedImpl object which really can just be thought of as a super-class to the internal Namespace instance. In java, and using the same kubernetes-client, this would look something like:

NonNamespaceOperation<Namespace, NamespaceList, DoneableNamespace, Resource<Namespace, DoneableNamespace>> namespaces = client.namespaces();
Resource<Namespace, DoneableNamespace> withName = namespaces.withName("hello-world");

The config{} closure is an attempt at trying to provide a common means of configuring Objects in a very gradle like fashion. This is considered an ADVANCED feature so please only use if the OOTB supplied properties are not enough.

On retry

All tasks, as well as the kubernetes extension point, implement the RetryAware trait. This allows the developer to define a common means, via the retry{} closure, to configure how tasks should be re-run. Developers can either define the retry{} closure on the extension point or on the task itself for more granular configurations. Some typical use-cases are as follows:

When defined on the extension:

kubernetes {
   retry {
       withDelay(10, TimeUnit.SECONDS)
       withMaxRetries(3)
   }
}

When defined on a task:

task getNamespace(type: GetNamespace) {
    namespace = "my-eventually-existing-namespace"
    retry {
        withDelay(10, TimeUnit.SECONDS)
        withMaxRetries(3)
    }
}

Task definitions of the retry{} closure take precedence over those defined on the extension point.

We use the failsafe library behind the scenes to execute code internally. Thus when you define/code a retry{} closure you're actually configuring a newly created instance of RetryPolicy.

It should be noted that we are not actually re-running the actual Task through some gradle magic done behind the scenes. Instead we are just re-running the internal "execution block" that each task implements.

On response

All tasks implement the ResponseAware trait. As such the end-user, and ONLY upon completion of a given task, will be able to query for a given tasks response() object. Furthermore the Object returned is different for each task and is documented in the table below.

As each task does some work in the backend it's sometimes helpful, or even desired, to get the returned object for further downstream inspection. Suppose you wanted a programmatic way of getting the name of the namespace you just created. You could do something like:

task myCustomNameSpace(type: CreateNamespace) {
    config {
        withName("hello-world") // applying name via `config{}` construct instead of property
    }
}

task downstreamTask(dependsOn: myCustomNameSpace) {
    doLast {
        def foundName = myCustomNameSpace.response().getMetadata().getName()
        // now do something with the `foundName` String
    }
}

Much like the config{} closure the response() method is an attempt at providing a standard way across all tasks of accessing the returned Object from the internal kubernetes-client invocation.

On reactive-streams

reactive-streams support is an optional feature you can take advantage of and works for all tasks. We try to align with best practices but given that we are executing within a gradle context we break the expected API from time to time to keep the look and feel of our plugin. Each task generally behaves the same but if one doesn't please visit have a look at the task definition itself for any documentaiton or nuance surrounding its use.

Documentation on how we implement this feature can be found in our HERE. Examples to help you get started can be found HERE.

onError stream

The onError closure is passed the exception that is thrown for YOU to handle. If you silently ignore we will not throw/re-throw the exception behind the scenes. Suppose you want to automate the creation of a Namespace but you don't want to fail if the namespace already exists. In this scenario you could do something like the below:

import com.bmuschko.gradle.kubernetes.plugin.tasks.namespaces.CreateNamespace

task createNamespace(type: CreateNamespace) {
    namespace = "namespace-that-possibly-exists"
    onError { exception ->
        if (exception.message.contains('namespace already exists')) { // not an actual message just an example
            // do nothing
        } else {
            throw execption
        }
    }
}

onNext stream

The onNext closure is passed the next iterative response upon execution or if the response contains a list then the next item in that list. For all other tasks we simply hand back the object that is given to us by the execution.

Iterative tasks are things like ListNamespaces or ListPods. These tasks have output which can be iterated over or return a list (e.g. Collection or Object[]) of some sort.

Suppose we want to list out, or simply work with, each available namespace. We might do something like:

import com.bmuschko.gradle.kubernetes.plugin.tasks.namespaces.ListNamespaces

task listNamespaces(type: ListNamespaces) {
    onNext { namespace ->
        logger.quiet "Found namespace: ${namespace.name()}"
    }
}

If 4 namespaces were present then the above onNext closure would execute for each found.

onComplete stream

The onComplete closure is not passed anything upon execution. It works in the same fashion that doLast does but is instead part of this task and thus executes before doLast kicks. This closure executes ONLY upon success. The below example demonstrates how this works.

import com.bmuschko.gradle.kubernetes.plugin.tasks.namespaces.GetNamespace

task getNamespace(type: GetNamespace) {
    namespace = "my-namespace"
    onComplete {
        logger.quiet 'Executes first'
    }
    doLast {
        logger.quiet 'Executes second'
    }
}

Examples

The functionalTests provide many examples that you can use for inspiration within your own code. If there are any questions about how to use a given feature feel free to open an issue and just ask.

Kubernetes Resources

About

No description, website, or topics provided.

Resources

License

Code of conduct

Stars

Watchers

Forks

Packages

No packages published