Moteino Shield requires a Moteino and a base station/bridge to work as shown in the example.

RFM69 Listening Mode Library: https://github.com/LowPowerLab/RFM69/tree/ListenMode

LowPower Library: https://github.com/LowPowerLab/LowPower

RFM Base station requires RFM69 library customization to work with D1 Mini Shield (https://github.com/hallard/WeMos-RFM69). Modified library file available in the /Arduino-Code/Libraries directory in this GitHub.

• PWR - Power Input (LiPo Battery Input)
• A0 - Voltage level input (See Arduino Blinds code example on how to derive voltage from analog input)
• A1 - 'CH' Signal Input from Solar Charger - Goes LOW when battery is charging
• A2 - 'OK' Signal Input from Solar Charger - Goes LOW when battery is fully charged (~4.2V)
• D3 - Hardware Interrupt - Used to wake the Moteino when using the momentary switches for manual control
• D4 - Switch 1 Input - Input from the momentary switch for manual control, direction of movement defined in code
• D5 - Relay Output - Trips the mechanical relay to power the voltage booster and the servo
• D6 - Servo Output - Sends commands to the attached servo
• D7 - Switch 2 Input - Input from the momentary switch for manual control, direction of movement defined in code