[Support]: 13.2 breaks video compression? Run out of diskspace in 2 hours #9930

Moondevil-ha · 2024-02-20T08:55:54Z

Moondevil-ha
Feb 20, 2024

Describe the problem you are having

I upgraded to 13.2 last night, just before bed. When checking the system this morning, all recordings had been deleted (last 5 days). The logs showed that the system ran out of space within 2 hours and initiated a purge. I didn't capture logs as I had to immediately get the system working again, and reverted to backup. 13.1 is again stable. If I get a chance, I'll reapply and get the log output at a quiet time. Have I missed a change that means I need additional settings?

Version

13.2

Frigate config file

# frigate.yml
mqtt:
  host: 192.168.1.248
  user: mqtt-user
  password: xxxxxxxx
  
#birdseye:
  # Optional: Enable birdseye view (default: shown below)
#  enabled: False
  # Optional: Width of the output resolution (default: shown below)
#  width: 1280
  # Optional: Height of the output resolution (default: shown below)
#  height: 720
  # Optional: Encoding quality of the mpeg1 feed (default: shown below)
  # 1 is the highest quality, and 31 is the lowest. Lower quality feeds utilize less CPU resources.
#  quality: 8
  # Optional: Mode of the view. Available options are: objects, motion, and continuous
  #   objects - cameras are included if they have had a tracked object within the last 30 seconds
  #   motion - cameras are included if motion was detected in the last 30 seconds
  #   continuous - all cameras are included always
#  mode: continuous
    
go2rtc:
  streams:
  #  rtsp_cam: # <- for RTSP streams
  #    - rtsp:https://192.168.1.5:554/live0 # <- stream which supports video & aac audio
  #    - "ffmpeg:rtsp_cam#audio=opus" # <- copy of the stream which transcodes audio to the missing codec (usually will be opus)
    Back_Garden: # <- for other streams
  #    - https://192.168.1.75/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=admin&password=xxxxxxxx # <- stream which supports video & aac audio
  #    - "ffmpeg:Back_Garden#audio=opus" # <- copy of the stream which transcodes audio to the missing codec (usually will be opus)
      - rtsp:https://admin:[email protected]:554/h264Preview_01_main 
      - "ffmpeg:Front_Yard#audio=opus" # <- copy of the stream which transcodes audio to the missing codec (usually will be opus)
    Sideway:
  #    - https://192.168.1.11/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=admin&password=xxxxxxxx
  #    - "ffmpeg:Sideway#audio=opus" # <- copy of the stream which transcodes audio to the missing codec (usually will be opus)
      - rtsp:https://admin:[email protected]:554/h264Preview_01_main 
      - "ffmpeg:Front_Yard#audio=opus" # <- copy of the stream which transcodes audio to the missing codec (usually will be opus)
    Front_Yard:
  #    - https://192.168.1.8/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=admin&password=xxxxxxxx
  #    - "ffmpeg:Front_Yard#audio=opus" # <- copy of the stream which transcodes audio to the missing codec (usually will be opus)
      - rtsp:https://admin:[email protected]:554/h264Preview_01_main 
      - "ffmpeg:Front_Yard#audio=opus" # <- copy of the stream which transcodes audio to the missing codec (usually will be opus)
    Downstairs:
      - rtsp:https://admin:[email protected]:554/h264Preview_01_main 
      - "ffmpeg:Front_Yard#audio=opus" # <- copy of the stream which transcodes audio to the missing codec (usually will be opus)
    Upstairs:
      - rtsp:https://admin:[email protected]:554/h264Preview_01_main
      - "ffmpeg:Front_Yard#audio=opus" # <- copy of the stream which transcodes audio to the missing codec (usually will be opus)
  webrtc:
    candidates:
      - 192.168.1.248:8555
      - stun:8555

cameras:
  Back_Garden:
    #rtmp:
    #  enabled: true
    ffmpeg:
      hwaccel_args:  preset-vaapi
      #  - -hwaccel
      #  - vaapi
      #  - -hwaccel_device
      #  - /dev/dri/renderD128
      #  - -hwaccel_output_format
      #  - yuv420p
      #  - -c:v 
      #  - h264_cuvid
      input_args:
        #- preset-rtsp-restream-low-latency
        - -avoid_negative_ts
        - make_zero
        #- live_flv
        - -fflags
        - genpts+discardcorrupt
        - -flags
        - low_delay
        - -strict
        - experimental
        - -analyzeduration
        - 1000M
        - -probesize
        - 1000M
        - -rw_timeout
        - "5000000"
      output_args:
        record: -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy
    #    record: preset-record-generic-audio-aac
      inputs:
        - path: rtsp:https://127.0.0.1:8554/Back_Garden?video=copy&audio=aac
      #  - path: rtmp:https://192.168.1.75/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=xxxxxxxx
      #  - path: https://192.168.1.75/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=admin&password=xxxxxxxx
          input_args: preset-rtsp-restream
          roles: 
            - detect
            - record
            #- rtmp
    detect:
      width: 2560
      height: 1920
      fps: 5
    objects:
      track:
        - person
        - dog
        - cat
      filters:
        person:
          min_score: 0.75

    snapshots:
      enabled: True
      timestamp: True
    record:
      # Optional: Enable recording (default: shown below)
      enabled: True
      # Optional: Number of days to retain recordings regardless of events (default: shown below)
      # NOTE: This should be set to 0 and retention should be defined in events section below
      #       if you only want to retain recordings of events.
      retain: 
        days: 5
        mode: all
      # Optional: Event recording settings
      events:
        # Optional: Maximum length of time to retain video during long events. (default: shown below)
        # NOTE: If an object is being tracked for longer than this amount of time, the retained recordings
        #       will be the last x seconds of the event unless retain_days under record is > 0.
        #max_seconds: 300
        # Optional: Number of seconds before the event to include (default: shown below)
        pre_capture: 5
        # Optional: Number of seconds after the event to include (default: shown below)
        post_capture: 5
        # Optional: Objects to save recordings for. (default: all tracked objects)
        objects:
          - person
          - cat
          - dog
        # Optional: Restrict recordings to objects that entered any of the listed zones (default: no required zones)
        required_zones: []
        # Optional: Retention settings for recordings of events
        retain:
          # Required: Default retention days (default: shown below)
          default: 5
          mode: all
          # Optional: Per object retention days
          objects:
            person: 10
    motion:
      mask:
        - 0,410,710,390,876,1158,379,1920,0,1920
        - 2560,234,1891,214,2560,633
  Sideway:
    #rtmp:
    #  enabled: true
    ffmpeg:
      hwaccel_args: preset-vaapi
      #  - -hwaccel
      #  - vaapi
      #  - -hwaccel_device
      #  - /dev/dri/renderD128
      #  - -hwaccel_output_format
      #  - yuv420p
      #  - -c:v 
      #  - h264_cuvid
      input_args:
        #- preset-rtsp-restream-low-latency
        - -avoid_negative_ts
        - make_zero
        #- live_flv
        - -fflags
        - genpts+discardcorrupt
        - -flags
        - low_delay
        - -strict
        - experimental
        - -analyzeduration
        - 1000M
        - -probesize
        - 1000M
        - -rw_timeout
        - "5000000"
      output_args:
        record: -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy
    #    record: preset-record-generic-audio-aac
      
      inputs:
        - path: rtsp:https://127.0.0.1:8554/Sideway?video=copy&audio=aac
      #  - path: rtmp:https://192.168.1.75/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=xxxxxxxx
      #  - path: https://192.168.1.75/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=admin&password=xxxxxxxx
          input_args: preset-rtsp-restream
          roles: 
            - detect
            - record
            #- rtmp
    detect:
      width: 2560
      height: 1440
      fps: 5
    objects:
      track:
        - person
        - dog
        - cat
      filters:
        person:
          min_score: 0.75
          mask:
            - 2389,1440,1588,818,1233,519,2560,0,2560,1440

    snapshots:
      enabled: True
      timestamp: True
    record:
      # Optional: Enable recording (default: shown below)
      enabled: True
      # Optional: Number of days to retain recordings regardless of events (default: shown below)
      # NOTE: This should be set to 0 and retention should be defined in events section below
      #       if you only want to retain recordings of events.
      retain: 
        days: 5
        mode: all
      # Optional: Event recording settings
      events:
        # Optional: Maximum length of time to retain video during long events. (default: shown below)
        # NOTE: If an object is being tracked for longer than this amount of time, the retained recordings
        #       will be the last x seconds of the event unless retain_days under record is > 0.
        #max_seconds: 300
        # Optional: Number of seconds before the event to include (default: shown below)
        pre_capture: 5
        # Optional: Number of seconds after the event to include (default: shown below)
        post_capture: 5
        # Optional: Objects to save recordings for. (default: all tracked objects)
        objects:
          - person
          - cat
          - dog
        # Optional: Restrict recordings to objects that entered any of the listed zones (default: no required zones)
        required_zones: []
        # Optional: Retention settings for recordings of events
        retain:
          # Required: Default retention days (default: shown below)
          default: 5
          mode: all
          # Optional: Per object retention days
          objects:
            person: 10
    motion:
      mask:
        - 2389,1440,1588,818,1233,519,2560,0,2560,1440
    
  Front_Yard:
    #rtmp:
    #  enabled: true
    ffmpeg:
      hwaccel_args: preset-vaapi
      #  - -hwaccel
      #  - vaapi
      #  - -hwaccel_device
      #  - /dev/dri/renderD128
      #  - -hwaccel_output_format
      #  - yuv420p
      #  - -c:v 
      #  - h264_cuvid
      input_args:
        #- preset-rtsp-restream-low-latency
        - -avoid_negative_ts
        - make_zero
        #- live_flv
        - -fflags
        - genpts+discardcorrupt
        - -flags
        - low_delay
        - -strict
        - experimental
        - -analyzeduration
        - 1000M
        - -probesize
        - 1000M
        - -rw_timeout
        - "5000000"
      output_args:
        record: -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy
    #    record: preset-record-generic-audio-aac      
      inputs:
        - path: rtsp:https://127.0.0.1:8554/Front_Yard?video=copy&audio=aac
      #  - path: rtmp:https://192.168.1.75/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=xxxxxxxx
      #  - path: https://192.168.1.75/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=admin&password=xxxxxxxx
          input_args: preset-rtsp-restream
          roles: 
            - detect
            - record
            #- rtmp
    detect:
      width: 2560
      height: 1920
      fps: 5
    objects:
      track:
        - person
        - dog
        - cat
      filters:
        person:
          min_score: 0.75
  
    snapshots:
      enabled: True
      timestamp: True
    record:
            # Optional: Enable recording (default: shown below)
      enabled: True
            # Optional: Number of days to retain recordings regardless of events (default: shown below)
            # NOTE: This should be set to 0 and retention should be defined in events section below
            #       if you only want to retain recordings of events.
      retain: 
        days: 5
        mode: all
            # Optional: Event recording settings
      events:
              # Optional: Maximum length of time to retain video during long events. (default: shown below)
              # NOTE: If an object is being tracked for longer than this amount of time, the retained recordings
              #       will be the last x seconds of the event unless retain_days under record is > 0.
        #max_seconds: 300
              # Optional: Number of seconds before the event to include (default: shown below)
        pre_capture: 5
              # Optional: Number of seconds after the event to include (default: shown below)
        post_capture: 5
              # Optional: Objects to save recordings for. (default: all tracked objects)
        objects:
          - person
          - cat
          - dog
              # Optional: Restrict recordings to objects that entered any of the listed zones (default: no required zones)
        required_zones: []
        # Optional: Retention settings for recordings of events
        retain:
                # Required: Default retention days (default: shown below)
          default: 5
          mode: all
                # Optional: Per object retention days
          objects:
            person: 15

  Downstairs:
    #rtmp:
    #  enabled: true
    ffmpeg:
      hwaccel_args: preset-vaapi
      #  - -hwaccel
      #  - vaapi
      #  - -hwaccel_device
      #  - /dev/dri/renderD128
      #  - -hwaccel_output_format
      #  - yuv420p
      #  - -c:v 
      #  - h264_cuvid
      input_args:
        - -avoid_negative_ts
        - make_zero
        #- live_flv
        - -fflags
        - genpts+discardcorrupt
        - -flags
        - low_delay
        - -strict
        - experimental
        - -analyzeduration
        - 1000M
        - -probesize
        - 1000M
        - -rw_timeout
        - "5000000"
      output_args:
        record: -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy
    #    record: preset-record-generic-audio-aac      
      inputs:
        - path: rtsp:https://127.0.0.1:8554/Downstairs?video=copy&audio=aac
      #  - path: rtmp:https://192.168.1.75/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=xxxxxxxx
      #  - path: https://192.168.1.75/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=admin&password=xxxxxxxx
          input_args: preset-rtsp-restream
          roles: 
            - detect
            - record
            #- rtmp
    detect:
      width: 2560
      height: 1440
      fps: 5
    objects:
      track:
        - person
        - dog
        - cat
      filters:
        person:
          min_score: 0.75
  
    snapshots:
      enabled: True
      timestamp: True
    record:
            # Optional: Enable recording (default: shown below)
      enabled: True
            # Optional: Number of days to retain recordings regardless of events (default: shown below)
            # NOTE: This should be set to 0 and retention should be defined in events section below
            #       if you only want to retain recordings of events.
      retain: 
        days: 1
        mode: all
            # Optional: Event recording settings
      events:
              # Optional: Maximum length of time to retain video during long events. (default: shown below)
              # NOTE: If an object is being tracked for longer than this amount of time, the retained recordings
              #       will be the last x seconds of the event unless retain_days under record is > 0.
        #max_seconds: 300
              # Optional: Number of seconds before the event to include (default: shown below)
        pre_capture: 5
              # Optional: Number of seconds after the event to include (default: shown below)
        post_capture: 5
              # Optional: Objects to save recordings for. (default: all tracked objects)
        objects:
          - person
          - cat
          - dog
              # Optional: Restrict recordings to objects that entered any of the listed zones (default: no required zones)
        required_zones: []
        # Optional: Retention settings for recordings of events
        retain:
                # Required: Default retention days (default: shown below)
          default: 5
          mode: all
                # Optional: Per object retention days
          objects:
            person: 5

  Upstairs:
    #rtmp:
    #  enabled: true
    ffmpeg:
      hwaccel_args: preset-vaapi
      #  - -hwaccel
      #  - vaapi
      #  - -hwaccel_device
      #  - /dev/dri/renderD128
      #  - -hwaccel_output_format
      #  - yuv420p
      #  - -c:v 
      #  - h264_cuvid
      input_args:
        - -avoid_negative_ts
        - make_zero
        #- live_flv
        - -fflags
        - genpts+discardcorrupt
        - -flags
        - low_delay
        - -strict
        - experimental
        - -analyzeduration
        - 1000M
        - -probesize
        - 1000M
        - -rw_timeout
        - "5000000"
      output_args:
        record: -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy
    #    record: preset-record-generic-audio-aac      
      inputs:
        - path: rtsp:https://127.0.0.1:8554/Upstairs?video=copy&audio=aac
      #  - path: rtmp:https://192.168.1.75/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=xxxxxxxx
      #  - path: https://192.168.1.75/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=admin&password=xxxxxxxx
          input_args: preset-rtsp-restream
          roles: 
            - detect
            - record
            #- rtmp
    detect:
      width: 2560
      height: 1440
      fps: 5
    objects:
      track:
        - person
        - dog
        - cat
      filters:
        person:
          min_score: 0.75
  
    snapshots:
      enabled: True
      timestamp: True
    record:
            # Optional: Enable recording (default: shown below)
      enabled: True
            # Optional: Number of days to retain recordings regardless of events (default: shown below)
            # NOTE: This should be set to 0 and retention should be defined in events section below
            #       if you only want to retain recordings of events.
      retain: 
        days: 1
        mode: all
            # Optional: Event recording settings
      events:
              # Optional: Maximum length of time to retain video during long events. (default: shown below)
              # NOTE: If an object is being tracked for longer than this amount of time, the retained recordings
              #       will be the last x seconds of the event unless retain_days under record is > 0.
        #max_seconds: 300
              # Optional: Number of seconds before the event to include (default: shown below)
        pre_capture: 5
              # Optional: Number of seconds after the event to include (default: shown below)
        post_capture: 5
              # Optional: Objects to save recordings for. (default: all tracked objects)
        objects:
          - person
          - cat
          - dog
              # Optional: Restrict recordings to objects that entered any of the listed zones (default: no required zones)
        required_zones: []
        # Optional: Retention settings for recordings of events
        retain:
                # Required: Default retention days (default: shown below)
          default: 5
          mode: all
                # Optional: Per object retention days
          objects:
            person: 5

detectors:
  coral_pci:
    type: edgetpu
    device: pci
  coral_usb:
    type: edgetpu
    device: usb

Relevant log output

Couldn't capture - will reapply

FFprobe output from your camera

[{"return_code":0,"stderr":"","stdout":{"programs":[],"streams":[{"avg_frame_rate":"0/0","codec_long_name":"H.264/AVC/MPEG-4AVC/MPEG-4part10","height":1920,"width":2560},{"avg_frame_rate":"0/0","codec_long_name":"AAC(AdvancedAudioCoding)"}]}}]

Frigate stats

No response

Operating system

HassOS

Install method

HassOS Addon

Coral version

PCIe

Network connection

Wired

Camera make and model

Reolink 511W, 410W, E1 Pro

Any other information that may be helpful

No response

Answered by NickM-27

Feb 21, 2024

should just use preset-record-generic-audio-copy, that is the same as what you have there

View full answer

NickM-27 · 2024-02-20T21:32:05Z

NickM-27
Feb 20, 2024
Collaborator Sponsor

I'd suggest using the recommended reolink config https://docs.frigate.video/configuration/camera_specific#reolink-cameras

0 replies

Moondevil-ha · 2024-02-20T22:29:45Z

Moondevil-ha
Feb 20, 2024
Author

Thanks for the prompt. I have tried, but have reverted to these settings as I couldn’t maintain stable recording.. 13.1 works fine. I will try again with the recommended settigs.

4 replies

NickM-27 Feb 20, 2024
Collaborator Sponsor

if you have issues then you should post with the recommended settings

Moondevil-ha Feb 21, 2024
Author

I'll do that today. I notice that the recommended settings for Reolink have changed recently, but it's not mentioned in any release notes. I know this as I had to significantly change things when 13.0 rolled round. Will post again when I've changed everything and re-upgraded.

Moondevil-ha Feb 21, 2024
Author

As an update, I've tidied up my config files, using recommended camera settings and format, except on the E1 pro's which only support rstp. I've upgrade to 13.2 and will monitor the disk usage.

The only thing I have had to keep outside of the recommended is my output_args as without it, I had no recorded audio.

  output_args:
    record: -f segment -segment_time 10 -segment_format mp4 -reset_timestamps 1 -strftime 1 -c copy

NickM-27 Feb 21, 2024
Collaborator Sponsor

should just use preset-record-generic-audio-copy, that is the same as what you have there

Answer selected by Moondevil-ha

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[Support]: 13.2 breaks video compression? Run out of diskspace in 2 hours #9930

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Replies: 2 comments 4 replies

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

[Support]: 13.2 breaks video compression? Run out of diskspace in 2 hours #9930

Moondevil-ha Feb 20, 2024

Describe the problem you are having

Version

Frigate config file

Relevant log output

FFprobe output from your camera

Frigate stats

Operating system

Install method

Coral version

Network connection

Camera make and model

Any other information that may be helpful

Replies: 2 comments · 4 replies

NickM-27 Feb 20, 2024 Collaborator Sponsor

Moondevil-ha Feb 20, 2024 Author

NickM-27 Feb 20, 2024 Collaborator Sponsor

Moondevil-ha Feb 21, 2024 Author

Moondevil-ha Feb 21, 2024 Author

NickM-27 Feb 21, 2024 Collaborator Sponsor

Moondevil-ha
Feb 20, 2024

Replies: 2 comments 4 replies

NickM-27
Feb 20, 2024
Collaborator Sponsor

Moondevil-ha
Feb 20, 2024
Author

NickM-27 Feb 20, 2024
Collaborator Sponsor

Moondevil-ha Feb 21, 2024
Author

Moondevil-ha Feb 21, 2024
Author

NickM-27 Feb 21, 2024
Collaborator Sponsor