Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Sonoff Basic Sensor issue #1082

Closed
edit21 opened this issue Oct 27, 2017 · 3 comments
Closed

Sonoff Basic Sensor issue #1082

edit21 opened this issue Oct 27, 2017 · 3 comments

Comments

@edit21
Copy link

edit21 commented Oct 27, 2017

Hi all, Have two basics, one on 5.8.0m and the other on 5.5.2b
Using a dht22 on both - both have identical setup though the on on 5.8.0m shows no sensor output, not even the sensor line in console, hoping this was a misconfiguration but all looks the same .

Working Basic:
20:34:25 MQTT: tele/sonoffsingle1/STATE = {"Time":"2017-10-27T20:34:25", "Uptime":34, "Vcc":3.165, "POWER":"ON", "Wifi":{"AP":1, "SSID":"BT-OpenRelay", "RSSI":70, "APMac":"00:1D:AA:F4:85:30"}}
20:34:25 MQTT: tele/sonoffsingle1/SENSOR = {"Time":"2017-10-27T20:34:25", "DHT22-14":{"Temperature":20.1, "Humidity":54.6}, "TempUnit":"C"}

Non working Basic (5.8.0m)
00:20:24 MQT: tele/sonoffsingle2/STATE = {"Time":"1970-01-01T00:20:24", "Uptime":1, "Vcc":3.138, "POWER":"OFF", "Wifi":{"AP":2, "SSId":"Error", "RSSI":40, "APMac":"00:1A:8C:C0:E4:31"}}

notice the MQT after the time stamp, all other logs are 3 chars long - not sure if that is relevant
@arendst
Copy link
Owner

arendst commented Oct 27, 2017

Try the latest version and enable more logging with option 3.

@edit21
Copy link
Author

edit21 commented Oct 28, 2017

Thanks - will do!

@edit21
Copy link
Author

edit21 commented Oct 28, 2017

Working now as expected on new FW \o/
TYVM for the code Arendst!

@edit21 edit21 closed this as completed Oct 28, 2017
@arendst arendst mentioned this issue Oct 29, 2017
Closed
arendst added a commit that referenced this issue Oct 29, 2017
@arendst
v5.8.0q Fixes and Shrinking code
ebe642c 
5.8.0q
 * Shrink code by 4k using command lookup tables
 * Add retry
counter to DHT11/21/22 sensors (#1082)
 * Add commands RfSync, RfLow,
RfHigh, RfHost and RfCode to allow sending custom RF codes (#1001)
arendst added a commit that referenced this issue Oct 30, 2017
@arendst
v5.9.0
e08d96a 
5.9.0 20171030
* Rewrite code (partly) using Google C++ Style Guide
(https://google.github.io/styleguide/cppguide.html)
* Rewrite code by using command lookup tables and javascript (client
side) web page expansions
* Change HTML/CSS to enable nicer form field entry
* Change default PWM assignments for H801 RGB(CW) led controller to
support optional Color/Dimmer control
*   GPIO04 (W2)    from GPIO_PWM2 to GPIO_USER to be user configurable
for GPIO_PWM5 (second White - Warm if W1 is Cold)
*   GPIO12 (Blue)  GPIO_PWM3 no change
*   GPIO13 (Green) from GPIO_PWM4 to GPIO_PWM2
*   GPIO14 (W1)    from GPIO_PWM1 to GPIO_USER to be user configurable
for GPIO_PWM4 (first White - Cold or Warm)
*   GPIO15 (Red)   from GPIO_PWM5 to GPIO_PWM1
* Change default PWM assignments for MagicHome RGB(W) led controller to
support optional Color/Dimmer control
*   GPIO05 (Green) from GPIO_PWM4 to GPIO_PWM2
*   GPIO12 (Blue)  from GPIO_PWM5 to GPIO_PWM3
*   GPIO13 (White) GPIO_USER to be user configurable for GPIO_PWM4
(White - Cold or Warm)
*   GPIO14 (Red)   from GPIO_PWM3 to GPIO_PWM1
* Change default PWM assignment for Witty Cloud to support optional
Color/Dimmer control (#976)
*   GPIO12 (Green) from GPIO_PWM4 to GPIO_PWM2
*   GPIO13 (Blue)  from GPIO_PWM5 to GPIO_PWM3
*   GPIO15 (Red)   from GPIO_PWM3 to GPIO_PWM1
* Change when another module is selected now all GPIO user configuration
is removed
* Change command name IRRemote to IRSend (#956)
* Remove Arduino IDE version too low warning as it interferes with
platformio.ini platform = espressif8266_stage
* Fix command FullTopic entry when using serial or console interface
* Fix possible UDP syslog blocking
* Fix minimum TelePeriod of 10 seconds set by web page
* Fix command GPIOx JSON response (#897)
* Fix inverted relay power on state (#909)
* Fix compile error when DOMOTICZ_UPDATE_TIMER is not defined (#930)
* Fix alignment of web page items in some browsers (#935)
* Fix setting all saved power settings to Off when SetOption0
(SaveState) = 0 (#955)
* Fix timezone range from -12/12 to -13/13 (#968)
* Fix Southern Hemisphere TIME_STD/TIME_DST (#968)
* Fix TLS MQTT SSL fingerprint test (#970, #808)
* Fix virtual relay status message used with Color/Dimmer control (#989)
* Fix command IRSend and IRHvac case sensitive parameter regression
introduced with version 5.8.0 (#993)
* Fix pressure calculation for some BMP versions regression introduced
with version 5.8.0i (#974)
* Fix Domoticz Dimmer set to same level not powering on (#945)
* Fix Blocked Loop when erasing large flash using command reset 2
(#1002)
* Fix relay power control when light power control is also configured as
regression from 5.8.0 (#1016)
* Fix Mqtt server mDNS lookup only when MqttHost name is empty (#1026)
* Add debug information to MQTT subscribe
* Add translations to I2Cscan
* Add translation to BH1750 unit lx
* Add light scheme options (Color cycle Up, Down, Random) and moving
WS2812 schemes up by 3
* Add Domoticz counter sensor to IrReceive representing Received IR
Protocol and Data
* Add option 0 to MqttHost to allow empty Mqtt host name
* Add support for Arilux AL-LC01 RGB Led controller (#370)
* Add esp8266 de-blocking to PubSubClient library (#790)
* Add Domoticz sensors for Voltage and Current (#903)
* Add platformio OTA upload support (#928, #934)
* Add warning to webpage when USE_MINIMAL is selected (#929)
* Add smoother movement of hour hand in WS2812 led clock (#936)
* Add support for Magic Home RGBW and some Arilux Led controllers (#940)
* Add command SetOption15 0 (default) for command PWM control or
SetOption15 1 for commands Color/Dimmer control to PWM RGB(CW) leds
(#941)
* Add Domoticz counter sensor to Sonoff Bridge representing Received RF
code (#943)
* Add support for Luani HVIO board
(https://luani.de/projekte/esp8266-hvio/) (#953)
* Add PWM initialization after restart (#955)
* Add IR Receiver support. Disable in user_config.h (#956)
* Add support for inverted PWM (#960)
* Add Sea level pressure calculation and Provide command Altitude (#974)
* Add support for up to 8 relays (#995)
* Add commands RfSync, RfLow, RfHigh, RfHost and RfCode to allow sending
custom RF codes (#1001)
* Add retain to ENERGY messages controlled by command SensorRetain
(#1013)
* Add commands Color2, Color3, Color4, Width2, Width3, Width4 and
SetOption16 to set Ws2812 Clock parameters (#1019)
* Add German language file (#1022)
* Add support for connecting to MQTT brokers without userid and/or
password (#1023)
* Add support for esp8266 core v2.4.0-rc2 (#1024)
* Add commands PwmRange 1,255..1023 and PwmFrequency 1,100..4000 (#1025)
* Add Polish language file (#1044, #1047)
* Add support for KMC 70011 Power Monitoring Smart Plug (#1045)
* Add support for VEML6070 I2C Ultra Violet level sensor (#1053)
* Add light turn Off Fade (#925)
* Add IrSend command option Panasonic as IrSend {"Protocol":"Panasonic",
"Bits":16388, "Data":<Panasonic data>}
*   where 16388 is 0x4004 hexadecimal (#1014)
* Add retry counter to DHT11/21/22 sensors (#1082)
curzon01 pushed a commit to curzon01/Tasmota that referenced this issue Sep 6, 2018
@arendst
v5.8.0q Fixes and Shrinking code
3da18c2 
5.8.0q
 * Shrink code by 4k using command lookup tables
 * Add retry
counter to DHT11/21/22 sensors (arendst#1082)
 * Add commands RfSync, RfLow,
RfHigh, RfHost and RfCode to allow sending custom RF codes (arendst#1001)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@arendst @edit21