This repo contains all currently available Azure Resource Manager templates contributed by the community. A searchable template index is maintained at https://azure.microsoft.com/en-us/documentation/templates/. The following information is relevant to get started with contributing to this repository.
- Contribution guide. Describes the minimal guidelines for contributing.
- Best practices. Best practices for improving the quality of your template design.
- Git tutorial. Step by step to get you started with Git.
- Useful Tools. Useful resources and tools for Azure development.
You can deploy these samples directly through the Azure Portal or by using the scripts supplied in the root of the repo.
To deploy a sample using the Azure Portal, click the Deploy to Azure button found in the README.md of each sample.
To deploy the sample via the command line (using Azure PowerShell or the Azure CLI 1.0) you can use the scripts below.
Simply execute the script and pass in the folder name of the sample you want to deploy.
For example:
.\Deploy-AzureResourceGroup.ps1 -ResourceGroupLocation 'eastus' -ArtifactStagingDirectory '[foldername]'
Please ensure that you have node and npm, jq and azure-cli installed.
./azure-group-deploy.sh -a [foldername] -l eastus
- If you see the following error: "syntax error near unexpected token `$'in\r''", run this command: 'dos2unix azure-group-deploy.sh'.
- If you see the following error: "jq: command not found", run this command: "sudo apt install jq".
- If you see the following error: "node: not found", install node and npm.
- If you see the following error: "azure-group-deploy.sh is not a command", make sure you run "chmod +x azure-group-deploy.sh".
If the sample has artifacts that need to be "staged" for deployment (Configuration Scripts, Nested Templates, DSC Packages) then set the upload switch on the command. You can optionally specify a storage account to use, if so the storage account must already exist within the subscription. If you don't want to specify a storage account one will be created by the script or reused if it already exists (think of this as "temp" storage for AzureRM).
.\Deploy-AzureResourceGroup.ps1 -ResourceGroupLocation 'eastus' -ArtifactStagingDirectory '201-vm-custom-script-windows' -UploadArtifacts
./azure-group-deploy.sh -a [foldername] -l eastus -u
To make sure your template is added to Azure.com index, please follow these guidelines. Any templates that are out of compliance will be added to the blacklist and not be indexed on Azure.com
- Every deployment template and its associated files must be contained in its own folder. Name this folder something that describes what your template does. Usually this naming pattern looks like appName-osName or level-platformCapability (e.g. 101-vm-user-image)
- Required - Numbering should start at 101. 100 is reserved for things that need to be at the top.
- Protip - Try to keep the name of your template folder short so that it fits inside the Github folder name column width.
- Github uses ASCII for ordering files and folder. For consistent ordering create all files and folders in lowercase. The only exception to this guideline is the README.md, that should be in the format UPPERCASE.lowercase.
- Include a README.md file that explains how the template works.
- Guidelines on the README.md file below.
- The deployment template file must be named azuredeploy.json.
- There should be a parameters file named azuredeploy.parameters.json.
- Please fill out the values for the parameters according to rules defined in the template (allowed values etc.), For parameters without rules, a simple "changeme" will do as the acomghbot only checks for syntactic correctness using the ARM Validate Template API.
- The template folder must contain a metadata.json file to allow the template to be indexed on Azure.com.
- Guidelines on the metadata.json file below.
- The custom scripts that are needed for successful template execution must be placed in a folder called scripts.
- Linked templates must be placed in a folder called nested.
- Images used in the README.md must be placed in a folder called images.
- Any resources that need to be setup outside the template should be named prefixed with existing (e.g. existingVNET, existingDiagnosticsStorageAccount).
The README.md describes your deployment. A good description helps other community members to understand your deployment. The README.md uses Github Flavored Markdown for formatting text. If you want to add images to your README.md file, store the images in the images folder. Reference the images in the README.md with a relative path (e.g. ![alt text](images/namingConvention.png "Files, folders and naming conventions")
). This ensures the link will reference the target repository if the source repository is forked. A good README.md contains the following sections
- Deploy to Azure button
- Visualize button
- Description of what the template will deploy
- Tags, that can be used for search. Specify the tags comma seperated and enclosed between two back-ticks (e.g Tags:
cluster, ha, sql
) - *Optional: Prerequisites
- *Optional: Description on how to use the application
- *Optional: Notes
Do not include the parameters or the variables of the deployment script. We render this on Azure.com from the template. Specifying these in the README.md will result in duplicate entries on Azure.com.
You can download a sample README.md for use in your deployment scenario. The sample README.md also contains the code for the Deploy to Azure and Visualize buttons, that you can use as a reference.
A valid metadata.json must adhere to the following structure
{
"itemDisplayName": "",
"description": "",
"summary": "",
"githubUsername": "",
"dateUpdated": "<e.g. 2015-12-20>"
}
The metadata.json file will be validated using these rules
itemDisplayName
- Cannot be more than 60 characters
description
- Cannot be more than 1000 characters
- Cannot contain HTML This is used for the template description on the Azure.com index template details page
summary
- Cannot be more than 200 characters
- This is shown for template description on the main Azure.com template index page
githubUsername
- This is the username of the original template author. Do not change this
- This is used to display template author and Github profile pic in the Azure.com index
dateUpdated
- Must be in yyyy-mm-dd format.
- The date must not be in the future to the date of the pull request
acomghbot is a bot designed to enforce the above rules and check the syntactic correctness of the template using the ARM Validate Template API. Below are some of the more cryptic error messages you might receive from the bot and how to solve these issues.
- This error is received when the parameters file contains a parameter that is not defined in the template.
The file azuredeploy.json is not valid. Response from ARM API: BadRequest - {"error":{"code":"InvalidTemplate","message":"Deployment template validation failed: 'The template parameters 'vmDnsName' are not valid; they are not present in the original template and can therefore not be provided at deployment time. The only supported parameters for this template are 'newStorageAccountName, adminUsername, adminPassword, dnsNameForPublicIP, windowsOSVersion, sizeOfDiskInGB'.'."}}
- This error is received when a parameter in the parameter file has an empty value.
The file azuredeploy.json is not valid. Response from ARM API: BadRequest - {"error":{"code":"InvalidTemplate","message":"Deployment template validation failed: 'The template resource '' at line '66' and column '6' is not valid. The name property cannot be null or empty'."}}
- This error message is received when a value entered in the parameters file is different from the allowed values defined for the parameter in the template file.
The file azuredeploy.json is not valid. Response from ARM API: BadRequest - {"error":{"code":"InvalidTemplate","message":"Deployment template validation failed: 'The provided value for the template parameter 'publicIPAddressType' at line '40' and column '29' is not valid.'."}}
We have automated template validation through Travis CI. These builds can be accessed by clicking the 'Details' link at the bottom of the pull-request dialog. This process will ensure that your template conforms to all the rules mentioned above and will also deploy your template to our test azure subscription.
To ensure your template passes, special placeholder values are required when deploying a template, depending what the parameter is used for:
- GEN-UNIQUE - use this placeholder for new storage account names, domain names for public ips and other fields that need a unique name. The value will always be alpha numeric value with a length of 18 characters.
- GEN-UNIQUE-[N] - use this placeholder for new storage account names, domain names for public ips and other fields that need a unique name. The value will always be alpha numeric value with a length of
[N]
, where[N]
can be any number from 3 to 32 inclusive. - GEN-SSH-PUB-KEY - use this placeholder if you need an SSH public key
- GEN-PASSWORD - use this placeholder if you need an azure-compatible password for a VM
Here's an example in an azuredeploy.parameters.json
file:
{
"$schema": "https://schema.management.azure.com/schemas/2015-01-01/deploymentParameters.json#",
"contentVersion": "1.0.0.0",
"parameters": {
"newStorageAccountName":{
"value": "GEN-UNIQUE"
},
"adminUsername": {
"value": "sedouard"
},
"sshKeyData": {
"value": "GEN-SSH-PUB-KEY"
},
"dnsNameForPublicIP": {
"value": "GEN-UNIQUE-13"
}
}
If you're making use of raw.githubusercontent.com links within your template contribution (within the template file itself or any scripts in your contribution) please ensure the following:
- Ensure any raw.githubusercontent.com links which refer to content within your pull request points to
https://raw.githubusercontent.com/Azure/azure-quickstart-templates/...
and NOT your fork. - All raw.githubusercontent.com links are placed in your azuredeploy.json and you pass the link down into your scripts & linked templates via this top-level template. This ensures we re-link correctly from your pull-request repository and branch.
- Although pull requests with links pointing to
https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/...
may not exist in the Azure repo at the time of your pull-request, at CI run-time, those links will be converted tohttps://raw.githubusercontent.com/{your_user_name}/azure-quickstart-templates/{your_branch}/...
. Be sure to check the casing ofhttps://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/...
as this is case-sensitive.
Note: You can find an example of relative linking in the nested template section of best practices document.
If your template has some pre-requisite such as an Azure Active Directory application or service principal, we don't support this yet. To bypass the CI workflow include a file called .ci_skip in the root of your template folder.
If your deployment fails, check the details link of the Travis CI build, which will take you to the CI log. If the template deployment was attempted, you will get two top-level fields. The first is parameters
which is the rendered version of your azuredeploy.parameters.json
. This will include any replacements for GEN-
parameters. The second is template
which is the contents of your azuredeploy.json
, after any raw.githubusercontent.com
relinking. These values are the exact values you need to reproduce the error. Keep in mind, that depending on the resources allocated, it can take a few minutes for the CI system to cleanup provisioned resources.
Here is an example failure log:
Server Error:{
"error": "Deployment provisioning state was not successful\n",
"_rgName": "qstci-26dd2ec4-bae9-12fb-fd46-fd4ce455a035",
"command": "azure group deployment create --resource-group (your_group_name) --template-file azuredeploy.json --parameters-file azuredeploy.parameters.json",
"parameters": {
"$schema": "https://schema.management.azure.com/schemas/2015-01-01/deploymentParameters.json#",
"contentVersion": "1.0.0.0",
"parameters": {
"clusterName": {
"value": "ci4391bcd700f86e84"
},
"clusterType": {
"value": "hadoop"
},
"clusterStorageAccountName": {
"value": "cifb07cf059735afba"
},
"clusterLoginUserName": {
"value": "admin"
},
"clusterLoginPassword": {
"value": "ciP$ss2e6a28784055eda8"
}
}
},
"template": {
"$schema": "https://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json#",
"contentVersion": "1.0.0.0",
"parameters": {
"clusterType": {
"type": "string",
"allowedValues": [
"hadoop",
"hbase",
"storm",
"spark"
],
"metadata": {
"description": "The type of the HDInsight cluster to create."
}
}
// more parameters here...
},
"variables": {
"defaultApiVersion": "2015-06-15",
"clusterApiVersion": "2015-03-01-preview",
"adlsApiVersion": "2015-10-01-preview"
},
"resources": [
{
"name": "[parameters('adlStoreName')]",
"type": "Microsoft.DataLakeStore/accounts",
"location": "East US 2",
"apiVersion": "[variables('adlsApiVersion')]",
"dependsOn": [],
"tags": {},
"properties": {
"initialUser": "[parameters('servicePrincipalObjectId')]"
}
},
// more resources here...
],
"outputs": {
"adlStoreAccount": {
"type": "object",
"value": "[reference(resourceId('Microsoft.DataLakeStore/accounts',parameters('adlStoreName')))]"
}
// more outputs here...
}
}
}
This project has adopted the [Microsoft Open Source Code of Conduct](https://opensource.microsoft.com/codeofconduct/). For more information see the [Code of Conduct FAQ](https://opensource.microsoft.com/codeofconduct/faq/) or contact [[email protected]](mailto:[email protected]) with any additional questions or comments.