This is the outdated API for the raspicomm.
For up-to-date information please refer to our getting started page.

The RasPiComm sourcecode contains the following folders:

• raspicomm - the raspicomm api
• daemon - raspicomm ethernet daemon
• steprocker - library that implements the tmcl (=trinamic motion control language) as a sample implementation of a rs485 device.
• display - library for using an lcd display as a sample i2c device.
• demo - a sample/demo application that uses the forementioned libraries.
• package - folder that holds scripts to create .deb packages.

Attention: Executing the raspicomm api requires superuser privileges!

There is no api support for the RS-232 port, as you can use standard linux libraries for accessing the serial port. The device name is '/dev/ttyAMA0'.

For example:
int fd = open("/dev/ttyAMA0", O_RDWR | O_NOCTTY | O_NDELAY);
...

Output: libraspicomm.so

The 'raspicomm' folder contains the sourcecode needed to build the main raspicomm api as a linux library.

For sample code, checkout the source for the demo application.

Depends on: libraspicomm.so, libraspicommsteprocker.so, libraspicommdisplay.so
Output: raspicommdemo

A demo executable that uses the raspicomm lib, steprocker lib and display lib from a cmdline interface.

Features:

• Setting the outputs
• Getting the outputs
• Clearing the outputs
• Getting the state of the buttons
• Moving the steprocker motor
• Reading motor parameters
• Writing to the lcd-display

Invoke it like: sudo raspicommdemo --setoutput

Output: raspicommd
Depends on: libraspicomm.so

The 'daemon' folder contains the sourcecode for the raspicomm ethernet daemon. The ethernet daemon allows two-way communication from the spi port to a socket, which is useful if you want to remotely control the spi port.

Upon startup, it opens a port and listens for a connection. The default port is 3333.

Start the daemon by calling: sudo /etc/init.d/raspicommd.sh start

You can configure the port that the daemon uses by editing /etc/raspicommd.conf and restarting the daemon. For example:
sudo vi /etc/raspicommd.conf
..edit..
sudo /etc/init.d/raspicommd.sh restart

The android based raspicomm steprocker app uses the ethernet daemon to remotely control the steprocker.

Output: libraspicommsteprocker.so
Depends on: libraspicomm.so

The 'steprocker' folder contains the sourcecode needed to build steprocker library, a simple c-library that implements the tmcl protocol.

Output: libraspicommdisplay.so
Depends on: libraspicomm.so

The 'display' folder contains the sourcecode for a library that accesses a lcd display using the i2c bus. It serves as a sample for implementation of accessing an i2c device.

Outputs: libraspicomm.deb, libraspicommsteprocker.deb, libraspicommdisplay.deb, raspicommd.deb, raspicommdemo.deb

The 'package' folder contains shell scripts in its subfolders to create debian packages for the libraries and and the executables. Executing sudo ./buildpackage.sh creates the debian package.

Install it by using sudo dpkg -i [name].deb and remove it again with sudo dpkg -r [name]

Besides deploying the libraries into /lib and the executables into /usr/sbin the packages also deploy additional files. e.g. raspicommd.deb deploys a script /etc/init.d/raspicommd.sh and a configuration file /etc/raspicommd.conf.