Fixup EFL and F4's sector selection. (qmk#19221)

builddefs/common_features.mk

@@ -230,7 +230,7 @@ else
  # Wear-leveling EEPROM implementation, backed by MCU flash
  OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_WEAR_LEVELING
  SRC += eeprom_driver.c eeprom_wear_leveling.c
- WEAR_LEVELING_DRIVER = embedded_flash
+ WEAR_LEVELING_DRIVER ?= embedded_flash
  else ifneq ($(filter $(MCU_SERIES),STM32L0xx STM32L1xx),)
  # True EEPROM on STM32L0xx, L1xx
  OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_STM32_L0_L1
@@ -239,7 +239,7 @@ else
  # Wear-leveling EEPROM implementation, backed by RP2040 flash
  OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_WEAR_LEVELING
  SRC += eeprom_driver.c eeprom_wear_leveling.c
- WEAR_LEVELING_DRIVER = rp2040_flash
+ WEAR_LEVELING_DRIVER ?= rp2040_flash
  else ifneq ($(filter $(MCU_SERIES),KL2x K20x),)
  # Teensy EEPROM implementations
  OPT_DEFS += -DEEPROM_KINETIS_FLEXRAM

keyboards/handwired/onekey/blackpill_f401/chconf.h

@@ -13,26 +13,9 @@
  * You should have received a copy of the GNU General Public License
  * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
  */
-
-/*
- * This file was auto-generated by:
- * `qmk chibios-confmigrate -i keyboards/handwired/onekey/blackpill_f401/chconf.h -r platforms/chibios/common/configs/chconf.h`
- */
-
+
 #pragma once
 
 #define CH_CFG_ST_FREQUENCY 10000
 
-#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
-
-#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
-
-#define CH_CFG_FACTORY_SEMAPHORES TRUE
-
-#define CH_CFG_FACTORY_MAILBOXES TRUE
-
-#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
-
-#define CH_CFG_FACTORY_PIPES TRUE
-
 #include_next <chconf.h>

keyboards/handwired/onekey/blackpill_f401/config.h

@@ -1,4 +1,4 @@
-/* Copyright 2019
+/* Copyright 2021 QMK
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,3 +25,7 @@
 #define ADC_PIN A0
 
 #define RGB_CI_PIN A2
+
+#define SOLENOID_PIN B12
+#define SOLENOID_PINS { B12, B13, B14, B15 }
+#define SOLENOID_PINS_ACTIVE_STATE { high, high, low }

keyboards/handwired/onekey/blackpill_f401/halconf.h

@@ -1,4 +1,4 @@
-/* Copyright 2020 QMK
+/* Copyright 2021 QMK
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,11 +14,6 @@
  * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
  */
 
-/*
- * This file was auto-generated by:
- * `qmk chibios-confmigrate -i keyboards/handwired/onekey/blackpill_f401/halconf.h -r platforms/chibios/common/configs/halconf.h`
- */
-
 #pragma once
 
 #define HAL_USE_ADC TRUE

keyboards/handwired/onekey/blackpill_f401/mcuconf.h

@@ -1,4 +1,4 @@
-/* Copyright 2020 Nick Brassel (tzarc)
+/* Copyright 2021 QMK
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

keyboards/handwired/onekey/blackpill_f401_tinyuf2/chconf.h

@@ -0,0 +1,21 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define CH_CFG_ST_FREQUENCY 10000
+
+#include_next <chconf.h>

keyboards/handwired/onekey/blackpill_f401_tinyuf2/config.h

@@ -0,0 +1,31 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+#define BACKLIGHT_PWM_DRIVER PWMD5
+#define BACKLIGHT_PWM_CHANNEL 1
+#define BACKLIGHT_PAL_MODE 2
+
+#define ADC_PIN A0
+
+#define RGB_CI_PIN A2
+
+#define SOLENOID_PIN B12
+#define SOLENOID_PINS { B12, B13, B14, B15 }
+#define SOLENOID_PINS_ACTIVE_STATE { high, high, low }

keyboards/handwired/onekey/blackpill_f401_tinyuf2/halconf.h

@@ -0,0 +1,25 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_ADC TRUE
+
+#define HAL_USE_I2C TRUE
+
+#define HAL_USE_PWM TRUE
+
+#include_next <halconf.h>

keyboards/handwired/onekey/blackpill_f401_tinyuf2/info.json

@@ -0,0 +1,16 @@
+{
+ "keyboard_name": "Onekey Blackpill STM32F401 TinyUF2",
+ "processor": "STM32F401",
+ "bootloader": "tinyuf2",
+ "board": "BLACKPILL_STM32_F401",
+ "matrix_pins": {
+ "cols": ["B0"],
+ "rows": ["A7"]
+ },
+ "backlight": {
+ "pin": "A0"
+ },
+ "rgblight": {
+ "pin": "A1"
+ }
+}

keyboards/handwired/onekey/blackpill_f401_tinyuf2/mcuconf.h

@@ -0,0 +1,28 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include_next "mcuconf.h"
+
+#undef STM32_ADC_USE_ADC1
+#define STM32_ADC_USE_ADC1 TRUE
+
+#undef STM32_I2C_USE_I2C1
+#define STM32_I2C_USE_I2C1 TRUE
+
+#undef STM32_PWM_USE_TIM5
+#define STM32_PWM_USE_TIM5 TRUE

keyboards/handwired/onekey/blackpill_f401_tinyuf2/readme.md

@@ -0,0 +1,9 @@
+# F401 Blackpill onekey
+
+* Supported Hardware: STM32F401CCU6 WeAct v1.3
+
+To trigger keypress, short together pins *B0* and *A7*.
+
+This variant requires the TinyUF2 bootloader to be installed. This can be downloaded from the [tinyuf2 releases page](https://github.com/adafruit/tinyuf2/releases). The F401 blackpill binary works for both F401- and F411-based blackpill devices.
+
+Double-tap reset to enter bootloader mode. Copy the built uf2 file to the device by dragging the file to the new USB disk.

keyboards/handwired/onekey/blackpill_f401_tinyuf2/rules.mk

@@ -0,0 +1 @@
+KEYBOARD_SHARED_EP = yes

keyboards/handwired/onekey/blackpill_f411/chconf.h

@@ -13,26 +13,9 @@
  * You should have received a copy of the GNU General Public License
  * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
  */
-
-/*
- * This file was auto-generated by:
- * `qmk chibios-confmigrate -i keyboards/handwired/onekey/blackpill_f411/chconf.h -r platforms/chibios/common/configs/chconf.h`
- */
-
+
 #pragma once
 
 #define CH_CFG_ST_FREQUENCY 10000
 
-#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
-
-#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
-
-#define CH_CFG_FACTORY_SEMAPHORES TRUE
-
-#define CH_CFG_FACTORY_MAILBOXES TRUE
-
-#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
-
-#define CH_CFG_FACTORY_PIPES TRUE
-
 #include_next <chconf.h>

keyboards/handwired/onekey/blackpill_f411/config.h

@@ -1,4 +1,4 @@
-/* Copyright 2019
+/* Copyright 2021 QMK
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

keyboards/handwired/onekey/blackpill_f411/halconf.h

@@ -1,4 +1,4 @@
-/* Copyright 2020 QMK
+/* Copyright 2021 QMK
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,11 +14,6 @@
  * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
  */
 
-/*
- * This file was auto-generated by:
- * `qmk chibios-confmigrate -i keyboards/handwired/onekey/blackpill_f411/halconf.h -r platforms/chibios/common/configs/halconf.h`
- */
-
 #pragma once
 
 #define HAL_USE_ADC TRUE

keyboards/handwired/onekey/blackpill_f411/mcuconf.h

@@ -1,4 +1,4 @@
-/* Copyright 2020 Nick Brassel (tzarc)
+/* Copyright 2021 QMK
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

keyboards/handwired/onekey/blackpill_f411_tinyuf2/chconf.h

@@ -1,4 +1,4 @@
-/* Copyright 2021 QMK
+/* Copyright 2020 QMK
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,7 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
  */
-
+ 
 #pragma once
 
 #define CH_CFG_ST_FREQUENCY 10000

keyboards/handwired/onekey/blackpill_f411_tinyuf2/config.h

@@ -25,3 +25,7 @@
 #define ADC_PIN A0
 
 #define RGB_CI_PIN A2
+
+#define SOLENOID_PIN B12
+#define SOLENOID_PINS { B12, B13, B14, B15 }
+#define SOLENOID_PINS_ACTIVE_STATE { high, high, low }

keyboards/handwired/onekey/keymaps/wear_leveling/config.h

@@ -0,0 +1,6 @@
+// Copyright 2018-2022 Nick Brassel (@tzarc)
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+#define DEBUG_EEPROM_OUTPUT
+#define WEAR_LEVELING_DEBUG_OUTPUT

keyboards/handwired/onekey/keymaps/wear_leveling/keymap.c

@@ -0,0 +1,65 @@
+// Copyright 2018-2022 Nick Brassel (@tzarc)
+// SPDX-License-Identifier: GPL-3.0-or-later
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ LAYOUT_ortho_1x1(QK_BOOT)
+};
+
+#ifdef DEBUG_EEPROM_OUTPUT
+
+# ifdef WEAR_LEVELING_ENABLE
+# include "wear_leveling.h"
+# endif // WEAR_LEVELING_ENABLE
+
+uint8_t prng(void) {
+ static uint8_t s = 0xAA, a = 0;
+ s ^= s << 3;
+ s ^= s >> 5;
+ s ^= a++ >> 2;
+ return s;
+}
+
+void keyboard_post_init_user(void) {
+ debug_enable = true;
+ debug_matrix = true;
+ debug_keyboard = true;
+}
+
+void matrix_scan_user(void) {
+ static uint32_t last_eeprom_access = 0;
+ uint32_t now = timer_read32();
+ if (now - last_eeprom_access > 5000) {
+ dprint("reading eeprom\n");
+ last_eeprom_access = now;
+
+ union {
+ uint8_t bytes[4];
+ uint32_t raw;
+ } tmp;
+ extern uint8_t prng(void);
+ tmp.bytes[0] = prng();
+ tmp.bytes[1] = prng();
+ tmp.bytes[2] = prng();
+ tmp.bytes[3] = prng();
+
+ eeconfig_update_user(tmp.raw);
+ uint32_t value = eeconfig_read_user();
+ if (value != tmp.raw) {
+ dprint("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n");
+ dprint("!! EEPROM readback mismatch!\n");
+ dprint("!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n");
+ }
+ }
+
+# ifdef WEAR_LEVELING_ENABLE
+ static uint32_t last_wear_leveling_init = 0;
+ if (now - last_wear_leveling_init > 30000) {
+ dprint("init'ing wear-leveling\n");
+ last_wear_leveling_init = now;
+ wear_leveling_init();
+ }
+# endif // WEAR_LEVELING_ENABLE
+}
+
+#endif // DEBUG_EEPROM_OUTPUT

keyboards/handwired/onekey/keymaps/wear_leveling/rules.mk

@@ -0,0 +1 @@
+CONSOLE_ENABLE = yes