Added analog support for WB32 MCU. (qmk#18289)

Co-authored-by: Joy <[email protected]>

keyboards/handwired/onekey/evb_wb32f3g71/config.h

@@ -0,0 +1,25 @@
+// Copyright 2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+#define ADC_PIN A0
+
+#define BACKLIGHT_PWM_DRIVER PWMD4
+#define BACKLIGHT_PWM_CHANNEL 3
+#define BACKLIGHT_PAL_MODE 2
+
+#define APA102_NOPS (100 / (1000000000L / (CPU_CLOCK / 4)))
+#define RGB_CI_PIN B8
+
+#define SOLENOID_PIN B12
+#define SOLENOID_PINS { B12, B13, B14, B15 }
+#define SOLENOID_PINS_ACTIVE_STATE { high, high, low }
+
+#define I2C1_SDA_PIN B7
+#define I2C1_SCL_PIN B6
+#define I2C1_SCL_PAL_MODE 4
+#define I2C1_OPMODE OPMODE_I2C
+#define I2C1_CLOCK_SPEED 100000

keyboards/handwired/onekey/evb_wb32f3g71/halconf.h

@@ -0,0 +1,11 @@
+// Copyright 2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#define HAL_USE_ADC TRUE
+
+#define HAL_USE_I2C TRUE
+
+#define HAL_USE_PWM TRUE
+
+#include_next <halconf.h>

keyboards/handwired/onekey/evb_wb32f3g71/info.json

@@ -5,5 +5,11 @@
  "matrix_pins": {
  "cols": ["B12"],
  "rows": ["B13"]
+ },
+ "backlight": {
+ "pin": "B8"
+ },
+ "rgblight": {
+ "pin": "A0"
  }
 }

keyboards/handwired/onekey/evb_wb32f3g71/mcuconf.h

@@ -0,0 +1,17 @@
+// Copyright 2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#include_next "mcuconf.h"
+
+#undef WB32_ADC_USE_ADC1
+#define WB32_ADC_USE_ADC1 TRUE
+
+#undef WB32_DMA_REQUIRED
+#define WB32_DMA_REQUIRED TRUE
+
+#undef WB32_I2C_USE_I2C1
+#define WB32_I2C_USE_I2C1 TRUE
+
+#undef WB32_PWM_USE_TIM4
+#define WB32_PWM_USE_TIM4 TRUE

keyboards/handwired/onekey/evb_wb32f3g71/rules.mk

@@ -1,3 +1 @@
-MOUSEKEY_ENABLE = no # Mouse keys
-EXTRAKEY_ENABLE = no # Audio control and System control
-NKRO_ENABLE = no # Enable N-Key Rollover
+KEYBOARD_SHARED_EP = yes

keyboards/handwired/onekey/evb_wb32fq95/config.h

@@ -0,0 +1,25 @@
+// Copyright 2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+#define ADC_PIN A0
+
+#define BACKLIGHT_PWM_DRIVER PWMD4
+#define BACKLIGHT_PWM_CHANNEL 3
+#define BACKLIGHT_PAL_MODE 2
+
+#define APA102_NOPS (100 / (1000000000L / (CPU_CLOCK / 4)))
+#define RGB_CI_PIN B8
+
+#define SOLENOID_PIN B12
+#define SOLENOID_PINS { B12, B13, B14, B15 }
+#define SOLENOID_PINS_ACTIVE_STATE { high, high, low }
+
+#define I2C1_SDA_PIN B7
+#define I2C1_SCL_PIN B6
+#define I2C1_SCL_PAL_MODE 4
+#define I2C1_OPMODE OPMODE_I2C
+#define I2C1_CLOCK_SPEED 100000

keyboards/handwired/onekey/evb_wb32fq95/halconf.h

@@ -0,0 +1,11 @@
+// Copyright 2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#define HAL_USE_ADC TRUE
+
+#define HAL_USE_I2C TRUE
+
+#define HAL_USE_PWM TRUE
+
+#include_next <halconf.h>

keyboards/handwired/onekey/evb_wb32fq95/info.json

@@ -5,5 +5,11 @@
  "matrix_pins": {
  "cols": ["B12"],
  "rows": ["B13"]
+ },
+ "backlight": {
+ "pin": "B8"
+ },
+ "rgblight": {
+ "pin": "A0"
  }
 }

keyboards/handwired/onekey/evb_wb32fq95/mcuconf.h

@@ -0,0 +1,17 @@
+// Copyright 2022 QMK
+// SPDX-License-Identifier: GPL-2.0-or-later
+#pragma once
+
+#include_next "mcuconf.h"
+
+#undef WB32_ADC_USE_ADC1
+#define WB32_ADC_USE_ADC1 TRUE
+
+#undef WB32_DMA_REQUIRED
+#define WB32_DMA_REQUIRED TRUE
+
+#undef WB32_I2C_USE_I2C1
+#define WB32_I2C_USE_I2C1 TRUE
+
+#undef WB32_PWM_USE_TIM4
+#define WB32_PWM_USE_TIM4 TRUE

keyboards/handwired/onekey/evb_wb32fq95/rules.mk

@@ -1,3 +1 @@
-MOUSEKEY_ENABLE = no # Mouse keys
-EXTRAKEY_ENABLE = no # Audio control and System control
-NKRO_ENABLE = no # Enable N-Key Rollover
+KEYBOARD_SHARED_EP = yes

platforms/chibios/drivers/analog.c

@@ -22,7 +22,7 @@
 # error "You need to set HAL_USE_ADC to TRUE in your halconf.h to use the ADC."
 #endif
 
-#if !STM32_ADC_USE_ADC1 && !STM32_ADC_USE_ADC2 && !STM32_ADC_USE_ADC3 && !STM32_ADC_USE_ADC4
+#if !STM32_ADC_USE_ADC1 && !STM32_ADC_USE_ADC2 && !STM32_ADC_USE_ADC3 && !STM32_ADC_USE_ADC4 && !WB32_ADC_USE_ADC1
 # error "You need to set one of the 'STM32_ADC_USE_ADCx' settings to TRUE in your mcuconf.h to use the ADC."
 #endif
 
@@ -37,7 +37,7 @@
 // Otherwise assume V3
 #if defined(STM32F0XX) || defined(STM32L0XX)
 # define USE_ADCV1
-#elif defined(STM32F1XX) || defined(STM32F2XX) || defined(STM32F4XX) || defined(GD32VF103)
+#elif defined(STM32F1XX) || defined(STM32F2XX) || defined(STM32F4XX) || defined(GD32VF103) || defined(WB32F3G71xx) || defined(WB32FQ95xx)
 # define USE_ADCV2
 #endif
 
@@ -74,7 +74,7 @@
 
 /* User configurable ADC options */
 #ifndef ADC_COUNT
-# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F4XX) || defined(GD32VF103)
+# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F4XX) || defined(GD32VF103) || defined(WB32F3G71xx) || defined(WB32FQ95xx)
 # define ADC_COUNT 1
 # elif defined(STM32F3XX)
 # define ADC_COUNT 4
@@ -121,7 +121,7 @@ static ADCConversionGroup adcConversionGroup = {
  .cfgr1 = ADC_CFGR1_CONT | ADC_RESOLUTION,
  .smpr = ADC_SAMPLING_RATE,
 #elif defined(USE_ADCV2)
-# if !defined(STM32F1XX) && !defined(GD32VF103)
+# if !defined(STM32F1XX) && !defined(GD32VF103) && !defined(WB32F3G71xx) && !defined(WB32FQ95xx)
  .cr2 = ADC_CR2_SWSTART, // F103 seem very unhappy with, F401 seems very unhappy without...
 # endif
  .smpr2 = ADC_SMPR2_SMP_AN0(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN1(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN2(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN3(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN4(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN5(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN6(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN7(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN8(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN9(ADC_SAMPLING_RATE),
@@ -219,7 +219,7 @@ __attribute__((weak)) adc_mux pinToMux(pin_t pin) {
  case F9: return TO_MUX( ADC_CHANNEL_IN7, 2 );
  case F10: return TO_MUX( ADC_CHANNEL_IN8, 2 );
 # endif
-#elif defined(STM32F1XX) || defined(GD32VF103)
+#elif defined(STM32F1XX) || defined(GD32VF103) || defined(WB32F3G71xx) || defined(WB32FQ95xx)
  case A0: return TO_MUX( ADC_CHANNEL_IN0, 0 );
  case A1: return TO_MUX( ADC_CHANNEL_IN1, 0 );
  case A2: return TO_MUX( ADC_CHANNEL_IN2, 0 );
@@ -248,7 +248,7 @@ __attribute__((weak)) adc_mux pinToMux(pin_t pin) {
 
 static inline ADCDriver* intToADCDriver(uint8_t adcInt) {
  switch (adcInt) {
-#if STM32_ADC_USE_ADC1
+#if STM32_ADC_USE_ADC1 || WB32_ADC_USE_ADC1
  case 0:
  return &ADCD1;
 #endif