Skip to content

PowerShell module to manage Fortinet (FortiGate) Firewall

License

Notifications You must be signed in to change notification settings

agragui/PowerFGT

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

PowerFGT

This is a Powershell module for configure a FortiGate (Fortinet) Firewall.

With this module (version 0.6.1) you can manage:

There is some extra feature

More functionality will be added later.

Connection can use HTTPS (default) or HTTP
Tested with FortiGate (using 5.6.x, 6.x and 7.x firmware but it will be also work with 5.4.x)
Add (Experimental) support of VDOM is available using -vdom parameter for each cmdlet

Usage

All resource management functions are available with the Powershell verbs GET, ADD, COPY, SET, REMOVE.
For example, you can manage Address with the following commands:

  • Get-FGTFirewallAddress
  • Add-FGTFirewallAddress
  • Copy-FGTFirewallAddress
  • Set-FGTFirewallAddress
  • Remove-FGTFirewallAddress

Requirements

  • Powershell 5 or 6.x/7.x (Core) (If possible get the latest version)
  • A Fortinet FortiGate Firewall and HTTPS enable (recommended)

Instructions

Install the module

# Automated installation (Powershell 5 or later):
    Install-Module PowerFGT

# Import the module
    Import-Module PowerFGT

# Get commands in the module
    Get-Command -Module PowerFGT

# Get help
    Get-Help Get-FGTFirewallAddress -Full

Examples

Connecting to the FortiGate Firewall

The first thing to do is to connect to a FortiGate Firewall with the command Connect-FGT :

# Connect to the FortiGate Firewall
    Connect-FGT 192.0.2.1

#we get a prompt for credential

if you get a warning about Unable to connect Look Issue

Address

You can create a new Address Add-FGTFirewallAddress, retrieve its information Get-FGTFirewallAddress, modify its properties Set-FGTFirewallAddress, copy/clone its properties Copy-FGTFirewallAddress or delete it Remove-FGTFirewallAddress.

# Get information about ALL address (using Format Table)
    Get-FGTFirewallAddress | Format-Table

    q_origin_key                 name                         uuid                                 subnet
    ------------                 ----                         ----                                 ------
    FIREWALL_AUTH_PORTAL_ADDRESS FIREWALL_AUTH_PORTAL_ADDRESS a940cdea-368c-51e9-2596-5ddfd54a087a 0.0.0.0 0.0.0.0
    SSLVPN_TUNNEL_ADDR1          SSLVPN_TUNNEL_ADDR1          a9416aca-368c-51e9-fe74-7dbb95fa64c9 10.212.134.200 10.212...
    all                          all                          a940cc32-368c-51e9-82f5-fa5337e9f45c 0.0.0.0 0.0.0.0
    autoupdate.opera.com         autoupdate.opera.com         a918c192-368c-51e9-ca8d-88cc94ed2d54 0.0.0.0 0.0.0.0
    google-play                  google-play                  a918cd22-368c-51e9-2f4f-2d914955741a 0.0.0.0 0.0.0.0
    swscan.apple.com             swscan.apple.com             a918d1dc-368c-51e9-08a7-c6004bf38fb9 0.0.0.0 0.0.0.0
    update.microsoft.com         update.microsoft.com         a918d650-368c-51e9-0cca-5f006a059f0b 0.0.0.0 0.0.0.0

# Create an address (type ipmask)
    Add-FGTFirewallAddress -Name 'My PowerFGT Network' -ip 192.0.2.1 -mask 255.255.255.0

    q_origin_key         : My PowerFGT Network
    name                 : My PowerFGT Network
    uuid                 : 9c65f75e-383e-51e9-a33a-caeffb7cfd33
    subnet               : 192.0.2.0 255.255.255.0
    type                 : ipmask
    start-ip             : 192.0.2.0
    end-ip               : 255.255.255.0
    fqdn                 :
    country              :
    wildcard-fqdn        :
    cache-ttl            : 0
    wildcard             : 192.0.2.0 255.255.255.0
    sdn                  :
    tenant               :
    organization         :
    epg-name             :
    subnet-name          :
    sdn-tag              :
    policy-group         :
    comment              :
    visibility           : enable
    associated-interface :
    color                : 0
    filter               :
    obj-id               :
    list                 : {}
    tagging              : {}
    allow-routing        : disable


# Get information an address (name) and display only some field (using Format-Table)
    Get-FGTFirewallAddress -name "My PowerFGT Network" | Select name, subnet, type, start-ip, end-ip | Format-Table

    name                subnet                  type   start-ip  end-ip
    ----                ------                  ----   --------  ------
    My PowerFGT Network 192.0.2.0 255.255.255.0 ipmask 192.0.2.0 255.255.255.0

# Get information some address (filter_type contains) and display only some field (using Format-Table)
    Get-FGTFirewallAddress -name update -filter_type contains | Select name, type, fqdn | Format-Table

    name                 type fqdn
    ----                 ---- ----
    autoupdate.opera.com fqdn autoupdate.opera.com
    update.microsoft.com fqdn update.microsoft.com

# Modify an address (name, comment, interface...)
    Get-FGTFirewallAddress -name "My PowerFGT Network" | Set-FGTFirewallAddress -name "MyNetwork" -comment "My comment" -interface port2

    q_origin_key         : MyNetwork
    name                 : MyNetwork
    uuid                 : 9c65f75e-383e-51e9-a33a-caeffb7cfd33
    subnet               : 192.0.2.0 255.255.255.0
    type                 : ipmask
    start-ip             : 192.0.2.0
    end-ip               : 255.255.255.0
    fqdn                 :
    country              :
    wildcard-fqdn        :
    cache-ttl            : 0
    wildcard             : 192.0.2.0 255.255.255.0
    sdn                  :
    tenant               :
    organization         :
    epg-name             :
    subnet-name          :
    sdn-tag              :
    policy-group         :
    comment              : My comment
    visibility           : enable
    associated-interface : port2
    color                : 0
    filter               :
    obj-id               :
    list                 : {}
    tagging              : {}
    allow-routing        : disable

# Copy/Clone an address
    Get-FGTFirewallAddress -name "MyNetwork" | Copy-FGTFirewallAddress -name "My New Network"

    q_origin_key         : My New Network
    name                 : My New Network
    uuid                 : 0c8da508-3840-51e9-f525-0601066767cc
    subnet               : 192.0.2.0 255.255.255.0
    type                 : ipmask
    start-ip             : 192.0.2.0
    end-ip               : 255.255.255.0
    fqdn                 :
    country              :
    wildcard-fqdn        :
    cache-ttl            : 0
    wildcard             : 192.0.2.0 255.255.255.0
    sdn                  :
    tenant               :
    organization         :
    epg-name             :
    subnet-name          :
    sdn-tag              :
    policy-group         :
    comment              : My comment
    visibility           : enable
    associated-interface : port2
    color                : 0
    filter               :
    obj-id               :
    list                 : {}
    tagging              : {}
    allow-routing        : disable

# Remove an address
    Get-FGTFirewallAddress -name "MyNetwork" | Remove-FGTFirewallAddress

    Confirm
    Are you sure you want to perform this action?
    Performing the operation "Remove Firewall Address" on target "MyNetwork".
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"):Y

#You can also create other address type like fqdn or iprange

# Create an address (type fqdn)
    Add-FGTFirewallAddress -Name FortiPower -fqdn fortipower.github.io

    name                 : FortiPower
    q_origin_key         : FortiPower
    uuid                 : 98af3292-3d6e-51eb-f488-f04057fbb871
    type                 : fqdn
    sub-type             : sdn
    clearpass-spt        : unknown
    start-mac            : 00:00:00:00:00:00
    end-mac              : 00:00:00:00:00:00
    fqdn                 : fortipower.github.io
    country              : 
    cache-ttl            : 0
    sdn                  : 
    fsso-group           : {}
    interface            : 
    comment              : 
    visibility           : enable
    associated-interface : 
    color                : 0
    filter               : 
    sdn-addr-type        : private
    obj-id               : 
    list                 : {}
    tagging              : {}
    allow-routing        : disable

# Create an address (type iprange)
   Add-FGTFirewallAddress -Name MyRange -startip 192.0.2.1 -endip 192.0.2.100

    name                 : MyRange
    q_origin_key         : MyRange
    uuid                 : a683a420-3d6e-51eb-5c90-f471f85943e8
    type                 : iprange
    sub-type             : sdn
    clearpass-spt        : unknown
    start-mac            : 00:00:00:00:00:00
    end-mac              : 00:00:00:00:00:00
    start-ip             : 192.0.2.1
    end-ip               : 192.0.2.100
    country              : 
    cache-ttl            : 0
    sdn                  : 
    fsso-group           : {}
    interface            : 
    comment              : 
    visibility           : enable
    associated-interface : 
    color                : 0
    filter               : 
    sdn-addr-type        : private
    obj-id               : 
    list                 : {}
    tagging              : {}
    allow-routing        : disable

Filtering

For Invoke-FGTRestMethod, it is possible to use -filter parameter You need to use FortiGate API syntax :

Key Operator Pattern Full Request Description
schedule == always GET /api/v2/cmdb/firewall/policy/?filter=schedule==always Only return firewall policy with schedule 'always'
schedule != always GET /api/v2/cmdb/firewall/policy/?filter=schedule!=always Return all firewall policy with schedule other than 'always'

and Filter Operators :

Operator Description
== Case insensitive match with pattern.
!= Does not match with pattern (case insensitive).
=@ Pattern found in object value (case insensitive).
!@ Pattern not found in object value (case insensitive).
<= Value must be less than or equal to pattern.
< Value must be less than pattern.
>= Value must be greater than or equal to pattern.
> Value must be greater than pattern.

For Invoke-FGTRestMethod and Get-XXX cmdlet like Get-FGTFirewallAddress, it is possible to using some helper filter (-filter_attribute, -filter_type, -filter_value)

# Get Firewall Address named myFGT
    Get-FGTFirewallAddress -name myFGT
...

# Get Firewall Address contains myFGT
    Get-FGTFirewallAddress -name myFGT -filter_type contains
...

# Get Firewall Address where subnet equal 192.0.2.0 255.255.255.0
    Get-FGTFirewallAddress -filter_attribute subnet -filter_type equal -filter_value 192.0.2.0 255.255.255.0
...

Actually, support only equal and contains filter type

Address Group

You can create a new Address Group Add-FGTFirewallAddressGroup, retrieve its information Get-FGTFirewallAddressGroup, modify its properties Set-FGTFirewallAddressGroup, copy/clone its properties Copy-FGTFirewallAddressGroup, Add member to Address Group Add-FGTFirewallAddressGroupMember and remove member Remove-FGTFirewallAddressGroupMember, or delete it Remove-FGTFirewallAddressGroup.

# Get information about ALL address Group (using Format Table)
    Get-FGTFirewallAddressgroup | Format-Table

    q_origin_key     name             uuid                                 member
    ------------     ----             ----                                 ------
    My Address Group My Address Group 292f6eaa-2613-51ea-866d-06cedca8805 {@{q_origin_key=FGT1; name=FGT1}, @{q_origin_ke…

# Add an address Group with FGT1 and FGT2 
    Add-FGTFirewallAddressGroup -name "My Address Group" -member FGT1, FGT2

    q_origin_key  : My Address Group
    name          : My Address Group
    uuid          : 292f6eaa-2613-51ea-866d-06cedca8805
    member        : {@{q_origin_key=FGT1; name=FGT1}, @{q_origin_key=FGT2; name=FGT2}}
    comment       :
    visibility    : enable
    color         : 0
    tagging       : {}
    allow-routing : disable

# Add FGT3 member to existing address Group
    Get-FGTFirewallAddressGroup -name "My Address Group" | Add-FGTFirewallAddressGroupMember -member FGT3

    q_origin_key  : MyAddressGroup
    name          : MyAddressGroup
    uuid          : 292f6eaa-2613-51ea-866d-06cedca8805a
    member        : {@{q_origin_key=FGT1; name=FGT1}, @{q_origin_key=FGT2; name=FGT2}, @{q_origin_key=FGT3; name=FGT3}}
    comment       :
    visibility    : enable
    color         : 0
    tagging       : {}
    allow-routing : disable

# Remove FGT2 member to existing address Group
    Get-FGTFirewallAddressGroup -name "My Address Group" | Remove-FGTFirewallAddressGroupMember -member FGT2

    q_origin_key  : My Address Group
    name          : My Address Group
    uuid          : 292f6eaa-2613-51ea-866d-06cedca8805a
    member        : {@{q_origin_key=FGT1; name=FGT1}, @{q_origin_key=FGT3; name=FGT3}}
    comment       :
    visibility    : enable
    color         : 0
    tagging       : {}
    allow-routing : disable

# Modify an address (comment, member...)
    Get-FGTFirewallAddressGroup -name "My Address Group" | Set-FGTFirewallAddressGroup -comment "My Address Group with only FGT2" -member FGT2

    q_origin_key  : My Address Group
    name          : My Address Group
    uuid          : 292f6eaa-2613-51ea-866d-06cedca8805a
    member        : {@{q_origin_key=FGT2; name=FGT2}}
    comment       : My Address Group with only FGT2
    visibility    : enable
    color         : 0
    tagging       : {}
    allow-routing : disable

# Copy/Clone an address Group
    Get-FGTFirewallAddressGroup -name "My Address Group" | Copy-FGTFirewallAddressGroup -name "My New Address Group"

    q_origin_key  : My New Address Group
    name          : My New Address Group
    uuid          : 9c2673a8-2614-51ea-9ab0-dfbd6f2c0475
    member        : {@{q_origin_key=FGT2; name=FGT2}}
    comment       : My Address Group with only FGT2
    visibility    : enable
    color         : 0
    tagging       : {}
    allow-routing : disable

# Remove an address Group
    Get-FGTFirewallAddressGroup -name "My Address Group" | Remove-FGTFirewallAddressGroup

    Confirm
    Are you sure you want to perform this action?
    Performing the operation "Remove Firewall Address Group" on target "My Address Group".
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"): Y

Virtual IP

You can create a new Virtual IP Add-FGTFirewallVip, retrieve its information Get-FGTFirewallVip, or delete it Remove-FGTFirewallVip.

# Get information about ALL Virtual IP (using Format Table)
    Get-FGTFirewallVip | Format-Table

    q_origin_key name        id uuid                                 comment type       dns-mapping-ttl ldb-method src-filter service
    ------------ ----        -- ----                                 ------- ----       --------------- ---------- ---------- -------
    myVIP1       myVIP1       0 3ccb44c6-2662-51ea-a469-3148c8eff287         static-nat               0 static     {}         {}
    myVIP3-8080  myVIP3-8080  0 73989828-2662-51ea-c969-4ad22d450075         static-nat               0 static     {}         {}

# Add a Virtual IP with Static NAT (192.2.0.1 => 198.51.100.1)
    Add-FGTFirewallVip -name myVIP1 -type static-nat -extip 192.2.0.1 -mappedip 198.51.100.1

    q_origin_key                     : myVIP1
    name                             : myVIP1
    id                               : 0
    uuid                             : 3ccb44c6-2662-51ea-a469-3148c8eff287
    comment                          :
    type                             : static-nat
    dns-mapping-ttl                  : 0
    ldb-method                       : static
    src-filter                       : {}
    service                          : {}
    extip                            : 192.2.0.1
    extaddr                          : {}
    mappedip                         : {@{q_origin_key=198.51.100.1; range=198.51.100.1}}
    [...]

# Add a Virtual IP with Static NAT and Port Forward (192.2.0.2:8080 => 198.51.100.2:80)
    Add-FGTFirewallVip -name myVIP2-8080to80 -type static-nat -extip 192.2.0.2 -mappedip 198.51.100.2 -portforward -extport 8080 -mappedport 80

    q_origin_key                     : myVIP2-8080to80
    name                             : myVIP2-8080to80
    id                               : 0
    uuid                             : 73989828-2662-51ea-c969-4ad22d450075
    comment                          :
    type                             : static-nat
    dns-mapping-ttl                  : 0
    ldb-method                       : static
    src-filter                       : {}
    service                          : {}
    extip                            : 192.2.0.2
    extaddr                          : {}
    mappedip                         : {@{q_origin_key=198.51.100.2; range=198.51.100.2}}
    mapped-addr                      :
    extintf                          : any
    arp-reply                        : enable
    server-type                      :
    persistence                      : none
    nat-source-vip                   : disable
    portforward                      : enable
    protocol                         : tcp
    extport                          : 8080
    mappedport                       : 80
    [...]

# Remove a Virtual IP
    Get-FGTFirewallVip -name myVIP1 | Remove-FGTFirewallVip

    Confirm
    Are you sure you want to perform this action?
    Performing the operation "Remove Firewall VIP" on target "myVIP1".
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"): Y

Virtual IP Group

You can create a new VIP Group Add-FGTFirewallVIPGroup, retrieve its information Get-FGTFirewallVIPGroup, modify its properties Set-FGTFirewallVIPGroup, copy/clone its properties Copy-FGTFirewallVIPGroup, Add member to Address Group Add-FGTFirewallVIPGroupMember and remove member Remove-FGTFirewallVIPGroupMember, or delete it Remove-FGTFirewallVIPGroup.

# Get information about ALL VIP Group (using Format Table)
    Get-FGTFirewallVipGroup | Format-Table

    name       q_origin_key uuid                                 interface color comments member
    ----       ------------ ----                                 --------- ----- -------- ------
    MyVIPGroup MyVIPGroup   cb875532-3d82-51eb-f120-075c29c10657 any           0          {@{name=myVIP1; q_origin_key=myVIP1}, @{name=myVIP2; q_origin_key=myVIP2}}

# Add a VIP Group with myVIP1 and myVIP2
    Add-FGTFirewallVIPGroup -name "MyVIPGroup" -member myVIP1, myVIP2

    name         : MyVIPGroup
    q_origin_key : MyVIPGroup
    uuid         : cb875532-3d82-51eb-f120-075c29c10657
    interface    : any
    color        : 0
    comments     :
    member       : {@{name=myVIP1; q_origin_key=myVIP1}, @{name=myVIP2; q_origin_key=myVIP2}}

# Add myVIP3 member to existing Virtual IP GROUP
    Get-FGTFirewallVIPGroup -name "MyVIPGroup" | Add-FGTFirewallVIPGroupMember -member myVIP3

    name         : MyVIPGroup
    q_origin_key : MyVIPGroup
    uuid         : cb875532-3d82-51eb-f120-075c29c10657
    interface    : any
    color        : 0
    comments     :
    member       : {@{name=myVIP1; q_origin_key=myVIP1}, @{name=myVIP2; q_origin_key=myVIP2}, @{name=myVIP3; q_origin_key=myVIP3}}

# Remove myVIP2 member to existing Virtual IP Group
    Get-FGTFirewallVIPGroup -name "MyVIPGroup" | Remove-FGTFirewallVIPGroupMember -member myVIP2

    name         : MyVIPGroup
    q_origin_key : MyVIPGroup
    uuid         : cb875532-3d82-51eb-f120-075c29c10657
    interface    : any
    color        : 0
    comments     :
    member       : {@{name=myVIP1; q_origin_key=myVIP1}, @{name=myVIP3; q_origin_key=myVIP3}}

# Modify a Virtual IP Group
    Get-FGTFirewallVIPGroup -name "MyVIPGroup" | Set-FGTFirewallVIPGroup -comment "My Virtual IP with only myVIP2" -member myVIP2

    name         : MyVIPGroup
    q_origin_key : MyVIPGroup
    uuid         : cb875532-3d82-51eb-f120-075c29c10657
    interface    : any
    color        : 0
    comments     : My Virtual IP with only myVIP2
    member       : {@{name=myVIP2; q_origin_key=myVIP2}}

# Remove a Virtual IP Group
    Get-FGTFirewallVIPGroup -name "MyVIPGroup" | Remove-FGTFirewallVIPGroup

    Confirm
    Are you sure you want to perform this action?
    Performing the operation "Remove Firewall VIP Group" on target "MyVIPGroup".
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"): y

Policy

You can create a new Policy Add-FGTFirewallPolicy, retrieve its information Get-FGTFirewallPolicy Add member to source or destinationn address Add-FGTFirewallPolicyMember and remove member Add-FGTFirewallPolicyMember, or delete it Remove-FGTFirewallPolicy.

# Get information about ALL Policies (using Format Table)
    Get-FGTFirewallPolicy | Format-Table
    q_origin_key policyid name         uuid                                 srcintf                             dstintf                             srcaddr
    ------------ -------- ----         ----                                 -------                             -------                             -------
            1           1 MyFGTPolicy  31a7ad9e-266e-51ea-1691-4906abad2e8b {@{q_origin_key=port1; name=port1}} {@{q_origin_key=port2; name=port2}} {@{q_origin_key=all; name=all}
            2           2 MyFGTPolicy2 3c8e5212-266e-51ea-2300-dc5fcb1a8e2a {@{q_origin_key=port1; name=port1}} {@{q_origin_key=port3; name=port3}} {@{q_origin_key=all; name=all}}

# Add Policy (MyFGTPolicy) allow ALL traffic between port1 to port2
    Add-FGTFirewallPolicy -name MyFGTPolicy -srcintf port1 -dstintf port2 -srcaddr all -dstaddr all
    q_origin_key                : 1
    policyid                    : 1
    name                        : MyFGTPolicy
    uuid                        : 31a7ad9e-266e-51ea-1691-4906abad2e8b
    srcintf                     : {@{q_origin_key=port1; name=port1}}
    dstintf                     : {@{q_origin_key=port2; name=port2}}
    srcaddr                     : {@{q_origin_key=all; name=all}}
    dstaddr                     : {@{q_origin_key=all; name=all}}
    internet-service            : disable
    internet-service-id         : {}
    internet-service-custom     : {}
    internet-service-src        : disable
    internet-service-src-id     : {}
    internet-service-src-custom : {}
    rtp-nat                     : disable
    rtp-addr                    : {}
    learning-mode               : disable
    action                      : accept
    send-deny-packet            : disable
    firewall-session-dirty      : check-all
    status                      : enable
    schedule                    : always
    schedule-timeout            : disable
    service                     : {@{q_origin_key=ALL; name=ALL}}
    [...]

# Add Policy (MyFGTPolicy2) allow ALL traffic between port1 to port3 and enable NAT (but disable rule)
    Add-FGTFirewallPolicy -name MyFGTPolicy2 -srcintf port1 -dstintf port3 -srcaddr all -dstaddr all -nat -status:$false -skip
    q_origin_key              : 2
    policyid                  : 2
    name                      : MyFGTPolicy2
    uuid                      : 6ad55b33-e514-4d60-a661-6addfe7b3ac8
    srcintf                   : {@{q_origin_key=port1; name=port1}}
    dstintf                   : {@{q_origin_key=port3; name=port3}}
    srcaddr                   : {@{q_origin_key=all; name=all}}
    dstaddr                   : {@{q_origin_key=all; name=all}}
    internet-service          : disable
    internet-service-src      : disable
    rtp-nat                   : disable
    learning-mode             : disable
    action                    : accept
    status                    : disable
    schedule                  : always
    schedule-timeout          : disable
    [...]

# Add FGT2 and FGT3 to source address (only FGT1 before)
    Get-FGTFirewallPolicy -name MyFGTPolicy3 | Add-FGTFirewallPolicyMember -srcaddr FGT1, FGT2

    q_origin_key              : 3
    policyid                  : 3
    name                      : MyFGTPolicy3
    uuid                      : d7d0fa66-3352-51ec-52cf-a215389b0ddb
    srcintf                   : {@{q_origin_key=port1; name=port1}}
    dstintf                   : {@{q_origin_key=port2; name=port2}}
    srcaddr                   : {@{q_origin_key=FGT1; name=FGT1}, @{q_origin_key=FGT2; name=FGT2}, @{q_origin_key=FGT3;name=FGT3}}
    dstaddr                   : {@{q_origin_key=all; name=all}}
    internet-service          : disable
    internet-service-src      : disable
    rtp-nat                   : disable
    learning-mode             : disable
    action                    : accept
    status                    : disable
    schedule                  : always
    schedule-timeout          : disable
    [...]

# Remove FGT3 from destination address (FGT1, FGT2, FGT3 before)
    Get-FGTFirewallPolicy -name MyFGTPolicy3 | Remove-FGTFirewallPolicyMember -srcaddr FGT3

    q_origin_key              : 3
    policyid                  : 3
    name                      : MyFGTPolicy3
    uuid                      : d7d0fa66-3352-51ec-52cf-a215389b0ddb
    srcintf                   : {@{q_origin_key=port1; name=port1}}
    dstintf                   : {@{q_origin_key=port2; name=port2}}
    srcaddr                   : {@{q_origin_key=all; name=all}}
    dstaddr                   : {@{q_origin_key=FGT1; name=FGT1}, @{q_origin_key=FGT2; name=FGT2}}
    internet-service          : disable
    internet-service-src      : disable
    rtp-nat                   : disable
    learning-mode             : disable
    action                    : accept
    status                    : disable
    schedule                  : always
    schedule-timeout          : disable
    [...]

# Move a Policy (MyFGTPolicy2 after MyFGTPolicy3)
    Get-FGTFirewallPolicy -name MyFGTPolicy2 | Move-FGTFirewallPolicy -after (Get-FGTFirewallPolicy -name MyFGTPolicy3)

    q_origin_key              : 2
    policyid                  : 2
    name                      : MyFGTPolicy2
    uuid                      : 6ad55b33-e514-4d60-a661-6addfe7b3ac8
    [...]


# Move a Policy (MyFGTPolicy3 before MyFGTPolicy2) with ask confirm
    Get-FGTFirewallPolicy -name MyFGTPolicy3 | Move-FGTFirewallPolicy -before (Get-FGTFirewallPolicy -name MyFGTPolicy2) -confirm

    Confirm
    Are you sure you want to perform this action?
    Performing the operation "Move Firewall Policy" on target "MyFGTPolicy3".
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"):

    q_origin_key              : 3
    policyid                  : 3
    name                      : MyFGTPolicy3
    uuid                      : d7d0fa66-3352-51ec-52cf-a215389b0ddb
    [...]


# Remove a Policy
    Get-FGTFirewallPolicy -name MyFGTPolicy2 | Remove-FGTFirewallPolicy
    Remove Policy on Fortigate
    Proceed with removal of Policy MyFGTPolicy2 ?
    [Y] Yes  [N] No  [?] Help (default is "N"): y

Zone

You can create a new Zone Add-FGTSystemZone, retrieve its information Get-FGTFSystemZone, modify its properties Set-SystemZone, Add member to Zone Add-SystemZoneMember and remove member Remove-SystemZoneMember, or delete it Remove-SystemZone.

# Get information about ALL Zone
    Get-FGTSystemZone

    name         : myPowerFGTZone
    q_origin_key : myPowerFGTZone
    tagging      : {}
    description  :
    intrazone    : deny
    interface    : {@{interface-name=port5; q_origin_key=port5}, @{interface-name=port6; q_origin_key=port6}}

# Add new Zone myPowerFGTZone2 with port7 and intrazone allowed
    Add-FGTSystemZone -name myPowerFGTZone2 -intrazone allow -interfaces port7

    name         : myPowerFGTZone2
    q_origin_key : myPowerFGTZone2
    tagging      : {}
    description  :
    intrazone    : allow
    interface    : {@{interface-name=port7; q_origin_key=port7}}

# Add new member (port8) to existing zone myPowerFGTZone2
    Get-FGTSystemZone -name myPowerFGTZone2 | Add-FGTSystemZoneMember -interfaces port8

    name         : myPowerFGTZone2
    q_origin_key : myPowerFGTZone2
    tagging      : {}
    description  :
    intrazone    : allow
    interface    : {@{interface-name=port7; q_origin_key=port7}, @{interface-name=port8; q_origin_key=port8}}

# Remove port7 member to existing zone myPowerFGTZone2
    Get-FGTSystemZone -name myPowerFGTZone2 | Remove-FGTSystemZoneMember -interfaces port7

    name         : myPowerFGTZone2
    q_origin_key : myPowerFGTZone2
    tagging      : {}
    description  :
    intrazone    : allow
    interface    : {@{interface-name=port8; q_origin_key=port8}}

# Modify a Zone (intrazone, interface...)
    Get-FGTSystemZone -name myPowerFGTZone2 | Set-FGTSystemZone -intrazone deny

    name         : myPowerFGTZone2
    q_origin_key : myPowerFGTZone2
    tagging      : {}
    description  :
    intrazone    : deny
    interface    : {@{interface-name=port8; q_origin_key=port8}}

# Remove a zone
    Get-FGTSystemZone -name myPowerFGTZone2 | Remove-FGTSystemZone

    Confirm
    Are you sure you want to perform this action?
    Performing the operation "Remove zone" on target "myPowerFGTZone2".
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"): Y

Static Route

You can create a new Static Route Add-FGTRouterStatic, retrieve its information Get-FGTRouterStatic, or delete it Remove-FGTRouterStatic.

# Get information about ALL Static Route (using Format Table)
    Get-FGTRouterStatic | Format-Table
    seq-num q_origin_key status dst                        src             gateway        distance weight priority device
    ------- ------------ ------ ---                        ---             -------        -------- ------ -------- ------
          2            2 enable 192.0.2.0 255.255.255.0    0.0.0.0 0.0.0.0 198.51.100.254       10      0        0 port1
          3            3 enable 198.51.100.0 255.255.255.0 0.0.0.0 0.0.0.0 192.0.2.254          10      0        0 port2

# Add Static Route to 192.0.2.0/24 via 198.51.100.254 from port1
    Add-FGTRouterStatic -dst 192.0.2.0/24 -gateway 198.51.100.254 -device port1
    seq-num                 : 2
    q_origin_key            : 2
    status                  : enable
    dst                     : 192.0.2.0 255.255.255.0
    src                     : 0.0.0.0 0.0.0.0
    gateway                 : 198.51.100.254
    distance                : 10
    weight                  : 0
    priority                : 0
    device                  : port1
    comment                 :
    blackhole               : disable
    dynamic-gateway         : disable
    sdwan-zone              : {}
    dstaddr                 :
    internet-service        : 0
    internet-service-custom :
    link-monitor-exempt     : disable
    vrf                     : 0
    bfd                     : disable
    [...]

# Add Static Route to 198.51.100.0/24 via 192.0.2.254 from port2
    Add-FGTRouterStatic -dst 198.51.100.0/24 -gateway 192.0.2.254 -device port2
    seq-num                 : 3
    q_origin_key            : 3
    status                  : enable
    dst                     : 198.51.100.0 255.255.255.0
    src                     : 0.0.0.0 0.0.0.0
    gateway                 : 192.0.2.254
    distance                : 10
    weight                  : 0
    priority                : 0
    device                  : port2
    comment                 :
    blackhole               : disable
    dynamic-gateway         : disable
    sdwan-zone              : {}
    dstaddr                 :
    internet-service        : 0
    internet-service-custom :
    link-monitor-exempt     : disable
    vrf                     : 0
    bfd                     : disable
    [...]

# Remove a Static Route
    Get-FGTRouterStatic -filter_attribute seq-num -filter_type equal -filter_value 2 | Remove-FGTRouterStatic

    Confirm
    Are you sure you want to perform this action?
    Performing the operation "Remove Router Static" on target "2".
    [Y] Yes  [N] No  [?] Help (default is "N"): y

Interface

You can create a new interface (Vlan ...) Add-FGTSystemInterface, retrieve its information Get-FGTSystemInterface, modify its properties Set-FGTSystemInterface or delete it Remove-FGTSystemInterface.

# Get information about ALL Interface (using Format Table)
    Get-FGTSystemInterface | Format-Table

    name      q_origin_key vdom vrf cli-conn-status fortilink switch-controller-source-ip mode   client-options distance
    ----      ------------ ---- --- --------------- --------- --------------------------- ----   -------------- --------
    fortilink fortilink    root   0               0 enable    outbound                    static {}                    5
    l2t.root  l2t.root     root   0               0 disable   outbound                    static {}                    5
    naf.root  naf.root     root   0               0 disable   outbound                    static {}                    5
    port1     port1        root   0               0 disable   outbound                    static {}                    5
    port2     port2        root   0               0 disable   outbound                    static {}                    5
    port3     port3        root   0               0 disable   outbound                    static {}                    5
    port4     port4        root   0               0 disable   outbound                    static {}                    5
    port5     port5        root   0               0 disable   outbound                    static {}                    5
    port6     port6        root   0               0 disable   outbound                    static {}                    5
    port7     port7        root   0               0 disable   outbound                    static {}                    5
    port8     port8        root   0               0 disable   outbound                    static {}                    5
    port9     port9        root   0               0 disable   outbound                    static {}                    5
    port10    port10       root   0               0 disable   outbound                    static {}                    5
    ssl.root  ssl.root     root   0               0 disable   outbound                    static {}                    5

# Create an interface (type vlan)
    Add-FGTSystemInterface -vlan_id 23 -interface port9 -name "PowerFGT_vlan23"

    name                                       : PowerFGT_vlan23
    q_origin_key                               : PowerFGT_vlan23
    vdom                                       : root
    vrf                                        : 0
    cli-conn-status                            : 0
    fortilink                                  : disable
    switch-controller-source-ip                : outbound
    mode                                       : static
    [...]

# Get information an Interface (name) and display only some field (using Format-Table)
    Get-FGTSystemInterface -name PowerFGT_vlan23 | select name, vlanid, ip

    name            vlanid ip
    ----            ------ --
    PowerFGT_vlan23     23 0.0.0.0 0.0.0.0

# Modify an interface (description, ip ...)
    Get-FGTSystemInterface -name PowerFGT_vlan23 | Set-FGTSystemInterface -alias ALIAS_PowerFGT -role lan -mode static -ip 192.0.2.1 -netmask 255.255.255.0 -allowaccess ping,https

    name                                       : PowerFGT_vlan23
    q_origin_key                               : PowerFGT_vlan23
    vdom                                       : root
    [...]
    ip                                         : 192.0.2.1 255.255.255.0
    allowaccess                                : ping https
    [...]
    interface                                  : port9
    external                                   : disable
    vlan-protocol                              : 8021q
    vlanid                                     : 23
    [...]
    description                                :
    alias                                      : ALIAS_PowerFGT
    [...]
    role                                       : lan
    [...]


# Add (append) allowaccess with SSH
    Get-FGTSystemInterface -name PowerFGT_vlan23 | Add-FGTSystemInterfaceMember -allowaccess ssh | select name, allowaccess

    name            allowaccess
    ----            -----------
    PowerFGT_vlan23 ping https ssh

# Remove allowaccess (https)
    Get-FGTSystemInterface -name PowerFGT_vlan23 | Remove-FGTSystemInterfaceMember -allowaccess https | select name, allowaccess

    name            allowaccess
    ----            -----------
    PowerFGT_vlan23 ping ssh

# Remove an interface
    Get-FGTSystemInterface -name PowerFGT_vlan23 | Remove-FGTSystemInterface

    Confirm
    Are you sure you want to perform this action?
    Performing the operation "Remove interface" on target "PowerFGT_vlan23".
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help (default is "Y"): Y

Settings

You can change System Settings and System Global (settings) using Set-FGTSystemSettings and Set-FGTSystemGlobal

# Get ALL information about System Global
    Get-FGTSystemGlobal

    language                                 : english
    gui-ipv6                                 : disable
    gui-replacement-message-groups           : disable
    gui-local-out                            : disable
    gui-certificates                         : enable
    gui-custom-language                      : disable
    gui-wireless-opensecurity                : disable
    gui-display-hostname                     : disable
    gui-fortigate-cloud-sandbox              : disable
    gui-firmware-upgrade-warning             : enable
    gui-allow-default-hostname               : disable
    gui-forticare-registration-setup-warning : enable
    gui-cdn-usage                            : enable
    admin-https-ssl-versions                 : tlsv1-2
    [...]

# Get only admintimeout and admin-sport of System Global

    Get-FGTSystemGlobal -Name admintimeout, admin-sport

    admintimeout admin-sport
    ------------ -----------
            5         443

# Configure admintimeout and admin-sport of System Global

    Set-FGTSystemGlobal -admintimeout 30 -admin_sport 8443

    [...]
    admintimeout                             : 30
    [...]
    admin-sport                              : 8443
    [...]

# for configure a setting not yet available on parameter of Set-FGTSystemGlobal, you can use

    $data = @{ "two-factor-sms-expiry" = 120 }
    Set-FGTSystemGlobal -data $data

    [...]
    two-factor-sms-expiry                    : 120
    [...]

# Get ALL information about System Settings
    Get-FGTSystemSettings

    comments                           : 
    opmode                             : nat
    ngfw-mode                          : profile-based
    http-external-dest                 : fortiweb
    firewall-session-dirty             : check-all
    manageip                           :
    gateway                            : 0.0.0.0
    ip                                 : 0.0.0.0 0.0.0.0
    manageip6                          : ::/0
    gateway6                           : ::
    ip6                                : ::/0
    device                             :
    bfd                                : disable
    [...]

# Get only gui-allow-unnamed-policy and opmode of System Settings

    Get-FGTSystemSettings -Name gui-allow-unnamed-policy, opmode

    gui-allow-unnamed-policy opmode
    ------------------------ ------
    disable                  nat


# Configure gui-allow-unnamed-policy of System Settings

    Set-FGTSystemSettings -gui_allow_unnamed_policy

    [...]
    gui-allow-unnamed-policy           : enable
    [...]

# for configure a setting not yet available on parameter of Set-FGTSystemSettings, you can use

    $data = @{ "location-id" = "192.0.2.1" }
    Set-FGTSystemSettings -data $data

    [...]
    location-id                        : 192.0.2.1
    [...]

Monitor

It is possible to monitor FortiGate

  • Get-FGTMonitorFirewallPolicy List traffic statistics for firewall policies
  • Get-FGTMonitorRouterIPv4 List all active IPv4 routing table entries
  • Get-FGTMonitorLicenseStatus Get current license & registration status
  • Get-FGTMonitorSystemConfigBackup Backup system config
  • Get-FGTMonitorSystemFirmware Retrieve a list of firmware images available to use for upgrade on this device
  • Get-FGTMonitorSystemHAChecksum List of checksums for members of HA cluster
  • Get-FGTMonitorSystemHAPeer Get configuration of peer(s) in HA cluster
  • Get-FGTMonitorVpnIPsec Return active IPsec VPNs
  • Get-FGTMonitorVpnSsl Retrieve a list of all SSL-VPN sessions and sub-sessions and Return statistics about the SSL-VPN

to get API uri, you can use Invoke-FGTRestMethod api/v2/monitor/?action=schema for get list of uri for monitor

Log Traffic

It is possible to get log traffic of FortiGate.

You can get the following type log

  • disk
  • fortianalyzer
  • forticloud
  • memory

and subtype

  • forward
  • local
  • multicast
  • sniffer
  • fortiview
  • threat

by default, it is only first 20 rows availables (use -rows parameter )’ /!\ you can get issue if you ask too many rows on small appliance /!\

can also filter by

  • Source IP (-srcip)
  • Source Interface (-srcintf)
  • Destination IP (-dstip)
  • Destination Interface (-dstintf)
  • Destination Port (-dstport)
  • Action (-action)
  • Policy ID (-policyid)
  • Policy UUID (-poluuid)

for Example

    #Get Log Traffic from memory on subtype forward and 10 000 rows

    Get-FGTLogTraffic -type memory -subtype forward -rows 10000 | Format-Table
    date       time               eventtime tz    logid      type    subtype level   vd   srcip
    ----       ----               --------- --    -----      ----    ------- -----   --   -----
    2022-03-06 22:52:28 1646635948633219391 -0800 0000000013 traffic forward notice  root 103.39.247.123
    2022-03-06 22:52:28 1646635948603208109 -0800 0000000013 traffic forward notice  root 103.39.247.123
    2022-03-06 22:52:28 1646635948593207059 -0800 0000000013 traffic forward notice  root 103.39.247.123
    2022-03-06 22:52:28 1646635948483209427 -0800 0000000022 traffic forward notice  root 10.88.130.131
    2022-03-06 22:52:28 1646635948483206444 -0800 0000000022 traffic forward notice  root 10.88.102.99
    2022-03-06 22:52:28 1646635948443205594 -0800 0000000022 traffic forward notice  root 10.88.110.122
    2022-03-06 22:52:28 1646635948443208223 -0800 0000000022 traffic forward notice  root 10.88.2.21
    2022-03-06 22:52:28 1646635948333207985 -0800 0000000013 traffic forward notice  root 216.251.148.178
    2022-03-06 22:52:28 1646635948283206523 -0800 0000000022 traffic forward notice  root 10.88.130.131
    2022-03-06 22:52:27 1646635948153206637 -0800 0001000014 traffic local   notice  root 127.0.0.1
    2022-03-06 22:52:27 1646635948083207799 -0800 0001000014 traffic local   notice  root 127.0.0.1
    2022-03-06 22:52:27 1646635948083211212 -0800 0001000014 traffic local   notice  root 127.0.0.1
    2022-03-06 22:52:27 1646635948163208549 -0800 0000000022 traffic forward notice  root 10.88.110.122
    [...]

Invoke API

for example to get Fortigate System Global Info

# get FortiGate System Global using API
    (Invoke-FGTRestMethod -method "get" -uri "api/v2/cmdb/system/global").results

    language                                : english
    gui-ipv6                                : disable
    gui-certificates                        : enable
    gui-custom-language                     : disable
    gui-wireless-opensecurity               : disable
    gui-display-hostname                    : disable
    gui-lines-per-page                      : 50
    admin-https-ssl-versions                : tlsv1-1 tlsv1-2
    admintimeout                            : 120
    admin-console-timeout                   : 0
    admin-concurrent                        : enable
    admin-lockout-threshold                 : 3
    admin-lockout-duration                  : 60
    refresh                                 : 0
    interval                                : 5
    failtime                                : 5
    daily-restart                           : disable
    restart-time                            : 00:00
    radius-port                             : 1812
    admin-login-max                         : 100
    remoteauthtimeout                       : 5
    ldapconntimeout                         : 500
    batch-cmdb                              : enable
    multi-factor-authentication             : optional
    dst                                     : enable
    timezone                                : 04
    traffic-priority                        : tos
    traffic-priority-level                  : medium
    anti-replay                             : strict
    send-pmtu-icmp                          : enable
    honor-df                                : enable
    revision-image-auto-backup              : disable
    revision-backup-on-logout               : disable
    management-vdom                         : root
    hostname                                : PowerFGT-FW1
[...]

to get API uri, you can use api/v2/cmdb/?action=schema uri for get schema
You can look also FortiOS - REST API Reference available on Fortinet Developer Network (FNDN)

VDOM

it is possible use VDOM using -vdom parameter on cmdlet command (by default it is root vdom)

For get FGT Firewall Address of vdomX

    Get-FGTFirewallAddress -vdom vdomX
[...]

For get FGT Firewall Address of vdomX and root

    Get-FGTFirewallAddress -vdom vdomX,root
[...]

For get FGT Firewall Address of all vdom

    Get-FGTFirewallAddress -vdom *
[...]

You can configure the "default" vdom when connect using

    Connect-FGT 192.0.2.1 -vdom vdomX
[...]

You can also change default vdom using

    Set-FGTConnection -vdom vdomY
[...]

Proxy

There is also cmdlet for Proxy

  • Proxy Address (Add/Copy/Get/Remove-FGTFirewallProxyAddress)
  • Proxy Address Group (Add/Copy/Get/Set/Remove-FGTFirewallProxyAddressGroup)
  • Proxy Policy (Add/Get/Remove-FGTFirewallProxyPolicy)

For Proxy Policy, it is possible to specific explict proxy or transparent For FortiGate 6.0.x, you need to enable proxy mode before (and enable feature)

Connecting with API Token

If you have a REST API administrator account setup, you can connect with the API

Connect-FGT 192.0.2.1 -ApiToken "yourtoken"

You can use API Token with HTTPS (or HTTP with FortiOS > 7.0.x but not recommended)

A REST API administrator account can be setup using the following FortiOS CLI commands:

config system accprofile
    edit "api_powerfgt"
        set netgrp read-write
        set fwgrp read-write
        set vpngrp read-write
        set system-diagnostics disable
    next
end

config system api-user
    edit "myaccount_powerfgt"
        set accprofile "api_powerfgt"
        config trusthost
            edit 1
                set ipv4-trusthost 192.0.2.0 255.255.255.0
            next
        end
    next
end

MultiConnection

From release 0.3.0, it is possible to connect on same times to multi FortiGate You need to use -connection parameter to cmdlet

For example to get interface of 2 FortiGate

# Connect to first FortiGate
    $fw1 = Connect-FGT 192.0.2.1 -SkipCertificateCheck -DefaultConnection:$false

#DefaultConnection set to false is not mandatory but only don't set the connection info on global variable

# Connect to second FortiGate
    $fw2 = Connect-FGT 192.0.2.2 -SkipCertificateCheck -DefaultConnection:$false

# Get Interface for first FortiGate
    Get-FGTSystemInterface -connection $fw1 | Format-Table

    q_origin_key  name          vdom vrf cli-conn-status fortilink mode   distance priority dhcp-relay-service
    ------------  ----          ---- --- --------------- --------- ----   -------- -------- ------------------
    DCFW          DCFW          root   0               0 disable   static        5        0 enable
    FITNUC        FITNUC        root   0               0 disable   static        5        0 disable
....

# Get Interface for second FortiGate
    Get-FGTSystemInterface -connection $fw2 | Format-Table

    q_origin_key  name          vdom vrf cli-conn-status fortilink mode   distance priority dhcp-relay-service
    ------------  ----          ---- --- --------------- --------- ----   -------- -------- ------------------
    FSA-DMZ       FSA-DMZ       root   0               0 disable   static        5        0 disable
    FSA-DMZ2      FSA-DMZ2      root   0               0 disable   static        5        0 disable
    FWLC          FWLC          root   0               0 disable   static        5        0 enable
...

#Each cmdlet can use -connection parameter

Disconnecting

# Disconnect from the FortiGate
    Disconnect-FGT

Deploy-VM

You can deploy FortiGate OVA (vapp), you need VMware.PowerCLI module and FortiGate OVF (available on support web site)

    $fortiBuildParams = @{
        ovf_path                    = "C:\FortiGate-VM64.vapp.ovf"
        vm_host                     = "MyHost"
        datastore                   = "MyDataStore"
        Cluster                     = "MyCluster"
        name_vm                     = "PowerFGT"
        hostname                    = "PowerFGT"
        dns_primary                 = "192.0.2.3"
        dns_secondary               = "192.0.2.4"
        int0_network_mode           = "Static"
        int0_gateway                = "192.0.2.254"
        int0_ip                     = "192.0.2.1"
        int0_netmask                = "255.255.255.0"
        int0_port_group             = "PG-PowerFGT"
        net_adapter                 = "vmxnet3"
    }
    Deploy-FGTVm @fortiBuildParams

    PowerFGT is ready to use (http://192.0.2.1) (need to Start VM !)

Issue

Unable to connect (certificate)

if you use Connect-FGT and get Unable to Connect (certificate)

The issue coming from use Self-Signed or Expired Certificate for Firewall Management
Try to connect using Connect-FGT -SkipCertificateCheck

Unable to connect

You can use also Connect-FGT -httpOnly for connect using HTTP (NOT RECOMMENDED !)

How to contribute

Contribution and feature requests are more than welcome. Please use the following methods:

  • For bugs and issues, please use the issues register with details of the problem.
  • For Feature Requests, please use the issues register with details of what's required.
  • For code contribution (bug fixes, or feature request), please request fork PowerFGT, create a feature/fix branch, add tests if needed then submit a pull request.

Contact

Currently, @alagoutte started this project and will keep maintaining it. Reach out to me via Twitter, Email (see top of file) or the issues Page here on GitHub. If you want to contribute, also get in touch with me.

List of available command

Add-FGTFirewallAddress
Add-FGTFirewallAddressGroup
Add-FGTFirewallAddressGroupMember
Add-FGTFirewallPolicy
Add-FGTFirewallPolicyMember
Add-FGTFirewallProxyAddress
Add-FGTFirewallProxyAddressGroup
Add-FGTFirewallProxyAddressGroupMember
Add-FGTFirewallProxyPolicy
Add-FGTFirewallVip
Add-FGTFirewallVipGroup
Add-FGTFirewallVipGroupMember
Add-FGTRouterStatic
Add-FGTSystemInterface
Add-FGTSystemInterfaceMember
Add-FGTSystemZone
Add-FGTSystemZoneMember
Confirm-FGTAddress
Confirm-FGTAddressGroup
Confirm-FGTFirewallPolicy
Confirm-FGTFirewallProxyPolicy
Confirm-FGTInterface
Confirm-FGTProxyAddress
Confirm-FGTProxyAddressGroup
Confirm-FGTRouterStatic
Confirm-FGTVip
Confirm-FGTVipGroup
Confirm-FGTZone
Connect-FGT
Copy-FGTFirewallAddress
Copy-FGTFirewallAddressGroup
Copy-FGTFirewallProxyAddress
Copy-FGTFirewallProxyAddressGroup
Copy-FGTFirewallVipGroup
Deploy-FGTVm
Disconnect-FGT
Get-FGTFirewallAddress
Get-FGTFirewallAddressGroup
Get-FGTFirewallIPPool
Get-FGTFirewallPolicy
Get-FGTFirewallProxyAddress
Get-FGTFirewallProxyAddressGroup
Get-FGTFirewallProxyPolicy
Get-FGTFirewallServiceCustom
Get-FGTFirewallServiceGroup
Get-FGTFirewallVip
Get-FGTFirewallVipGroup
Get-FGTLogTraffic
Get-FGTMonitorFirewallPolicy
Get-FGTMonitorLicenseStatus
Get-FGTMonitorRouterIPv4
Get-FGTMonitorSystemConfigBackup
Get-FGTMonitorSystemFirmware
Get-FGTMonitorSystemHAChecksum
Get-FGTMonitorSystemHAPeer
Get-FGTMonitorVpnIPsec
Get-FGTMonitorVpnSsl
Get-FGTRouterPolicy
Get-FGTRouterStatic
Get-FGTSystemAdmin
Get-FGTSystemDns
Get-FGTSystemDnsServer
Get-FGTSystemGlobal
Get-FGTSystemHA
Get-FGTSystemInterface
Get-FGTSystemSDWAN
Get-FGTSystemSettings
Get-FGTSystemVdom
Get-FGTSystemVirtualWANLink
Get-FGTSystemZone
Get-FGTUserGroup
Get-FGTUserLDAP
Get-FGTUserLocal
Get-FGTUserRADIUS
Get-FGTVpnIpsecPhase1Interface
Get-FGTVpnIpsecPhase2Interface
Invoke-FGTRestMethod
Move-FGTFirewallPolicy
Remove-FGTFirewallAddress
Remove-FGTFirewallAddressGroup
Remove-FGTFirewallAddressGroupMember
Remove-FGTFirewallPolicy
Remove-FGTFirewallPolicyMember
Remove-FGTFirewallProxyAddress
Remove-FGTFirewallProxyAddressGroup
Remove-FGTFirewallProxyAddressGroupMember
Remove-FGTFirewallProxyPolicy
Remove-FGTFirewallVip
Remove-FGTFirewallVipGroup
Remove-FGTFirewallVipGroupMember
Remove-FGTRouterStatic
Remove-FGTSystemInterface
Remove-FGTSystemInterfaceMember
Remove-FGTSystemZone
Remove-FGTSystemZoneMember
Set-FGTCipherSSL
Set-FGTConnection
Set-FGTFirewallAddress
Set-FGTFirewallAddressGroup
Set-FGTFirewallProxyAddressGroup
Set-FGTFirewallVipGroup
Set-FGTSystemGlobal
Set-FGTSystemInterface
Set-FGTSystemSettings
Set-FGTSystemZone
Set-FGTUntrustedSSL
Show-FGTException

Author

Alexis La Goutte

Contributors

  • Arthur Heijnen
  • Benjamin Perrier
  • Brett Pound
  • Dave Hope
  • Cédric Moreau
  • Evan Chisholm
  • Jelmer Jaarsma
  • Kevin Shu
  • Sylvain Gomez

Sort by name (git shortlog -s)

Special Thanks

  • Warren F. for his blog post 'Building a Powershell module'
  • Erwan Quelin for help about Powershell

License

Copyright 2019-2022 Alexis La Goutte and the community.

About

PowerShell module to manage Fortinet (FortiGate) Firewall

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • PowerShell 100.0%