Skip to content

AIOHTTP has problems in HTTP parser (the python one, not llhttp)

Moderate severity GitHub Reviewed Published Nov 14, 2023 in aio-libs/aiohttp • Updated Sep 4, 2024

Package

pip aiohttp (pip)

Affected versions

< 3.8.6

Patched versions

3.8.6

Description

Summary

The HTTP parser in AIOHTTP has numerous problems with header parsing, which could lead to request smuggling.
This parser is only used when AIOHTTP_NO_EXTENSIONS is enabled (or not using a prebuilt wheel).

Details

Bug 1: Bad parsing of Content-Length values

Description

RFC 9110 says this:

Content-Length = 1*DIGIT

AIOHTTP does not enforce this rule, presumably because of an incorrect usage of the builtin int constructor. Because the int constructor accepts + and - prefixes, and digit-separating underscores, using int to parse CL values leads AIOHTTP to significant misinterpretation.

Examples

GET / HTTP/1.1\r\n
Content-Length: -0\r\n
\r\n
X
GET / HTTP/1.1\r\n
Content-Length: +0_1\r\n
\r\n
X

Suggested action

Verify that a Content-Length value consists only of ASCII digits before parsing, as the standard requires.

Bug 2: Improper handling of NUL, CR, and LF in header values

Description

RFC 9110 says this:

Field values containing CR, LF, or NUL characters are invalid and dangerous, due to the varying ways that implementations might parse and interpret those characters; a recipient of CR, LF, or NUL within a field value MUST either reject the message or replace each of those characters with SP before further processing or forwarding of that message.

AIOHTTP's HTTP parser does not enforce this rule, and will happily process header values containing these three forbidden characters without replacing them with SP.

Examples

GET / HTTP/1.1\r\n
Header: v\x00alue\r\n
\r\n
GET / HTTP/1.1\r\n
Header: v\ralue\r\n
\r\n
GET / HTTP/1.1\r\n
Header: v\nalue\r\n
\r\n

Suggested action

Reject all messages with NUL, CR, or LF in a header value. The translation to space thing, while technically allowed, does not seem like a good idea to me.

Bug 3: Improper stripping of whitespace before colon in HTTP headers

Description

RFC 9112 says this:

No whitespace is allowed between the field name and colon. In the past, differences in the handling of such whitespace have led to security vulnerabilities in request routing and response handling. A server MUST reject, with a response status code of 400 (Bad Request), any received request message that contains whitespace between a header field name and colon.

AIOHTTP does not enforce this rule, and will simply strip any whitespace before the colon in an HTTP header.

Example

GET / HTTP/1.1\r\n
Content-Length : 1\r\n
\r\n
X

Suggested action

Reject all messages with whitespace before a colon in a header field, as the standard requires.

PoC

Example requests are embedded in the previous section. To reproduce these bugs, start an AIOHTTP server without llhttp (i.e. AIOHTTP_NO_EXTENSIONS=1) and send the requests given in the previous section. (e.g. by printfing into nc)

Impact

Each of these bugs can be used for request smuggling.

References

@Dreamsorcerer Dreamsorcerer published to aio-libs/aiohttp Nov 14, 2023
Published by the National Vulnerability Database Nov 14, 2023
Published to the GitHub Advisory Database Nov 14, 2023
Reviewed Nov 14, 2023
Last updated Sep 4, 2024

Severity

Moderate

CVSS overall score

This score calculates overall vulnerability severity from 0 to 10 and is based on the Common Vulnerability Scoring System (CVSS).
/ 10

CVSS v4 base metrics

Exploitability Metrics
Attack Vector Network
Attack Complexity Low
Attack Requirements None
Privileges Required None
User interaction None
Vulnerable System Impact Metrics
Confidentiality None
Integrity Low
Availability None
Subsequent System Impact Metrics
Confidentiality None
Integrity None
Availability None

CVSS v4 base metrics

Exploitability Metrics
Attack Vector: This metric reflects the context by which vulnerability exploitation is possible. This metric value (and consequently the resulting severity) will be larger the more remote (logically, and physically) an attacker can be in order to exploit the vulnerable system. The assumption is that the number of potential attackers for a vulnerability that could be exploited from across a network is larger than the number of potential attackers that could exploit a vulnerability requiring physical access to a device, and therefore warrants a greater severity.
Attack Complexity: This metric captures measurable actions that must be taken by the attacker to actively evade or circumvent existing built-in security-enhancing conditions in order to obtain a working exploit. These are conditions whose primary purpose is to increase security and/or increase exploit engineering complexity. A vulnerability exploitable without a target-specific variable has a lower complexity than a vulnerability that would require non-trivial customization. This metric is meant to capture security mechanisms utilized by the vulnerable system.
Attack Requirements: This metric captures the prerequisite deployment and execution conditions or variables of the vulnerable system that enable the attack. These differ from security-enhancing techniques/technologies (ref Attack Complexity) as the primary purpose of these conditions is not to explicitly mitigate attacks, but rather, emerge naturally as a consequence of the deployment and execution of the vulnerable system.
Privileges Required: This metric describes the level of privileges an attacker must possess prior to successfully exploiting the vulnerability. The method by which the attacker obtains privileged credentials prior to the attack (e.g., free trial accounts), is outside the scope of this metric. Generally, self-service provisioned accounts do not constitute a privilege requirement if the attacker can grant themselves privileges as part of the attack.
User interaction: This metric captures the requirement for a human user, other than the attacker, to participate in the successful compromise of the vulnerable system. This metric determines whether the vulnerability can be exploited solely at the will of the attacker, or whether a separate user (or user-initiated process) must participate in some manner.
Vulnerable System Impact Metrics
Confidentiality: This metric measures the impact to the confidentiality of the information managed by the VULNERABLE SYSTEM due to a successfully exploited vulnerability. Confidentiality refers to limiting information access and disclosure to only authorized users, as well as preventing access by, or disclosure to, unauthorized ones.
Integrity: This metric measures the impact to integrity of a successfully exploited vulnerability. Integrity refers to the trustworthiness and veracity of information. Integrity of the VULNERABLE SYSTEM is impacted when an attacker makes unauthorized modification of system data. Integrity is also impacted when a system user can repudiate critical actions taken in the context of the system (e.g. due to insufficient logging).
Availability: This metric measures the impact to the availability of the VULNERABLE SYSTEM resulting from a successfully exploited vulnerability. While the Confidentiality and Integrity impact metrics apply to the loss of confidentiality or integrity of data (e.g., information, files) used by the system, this metric refers to the loss of availability of the impacted system itself, such as a networked service (e.g., web, database, email). Since availability refers to the accessibility of information resources, attacks that consume network bandwidth, processor cycles, or disk space all impact the availability of a system.
Subsequent System Impact Metrics
Confidentiality: This metric measures the impact to the confidentiality of the information managed by the SUBSEQUENT SYSTEM due to a successfully exploited vulnerability. Confidentiality refers to limiting information access and disclosure to only authorized users, as well as preventing access by, or disclosure to, unauthorized ones.
Integrity: This metric measures the impact to integrity of a successfully exploited vulnerability. Integrity refers to the trustworthiness and veracity of information. Integrity of the SUBSEQUENT SYSTEM is impacted when an attacker makes unauthorized modification of system data. Integrity is also impacted when a system user can repudiate critical actions taken in the context of the system (e.g. due to insufficient logging).
Availability: This metric measures the impact to the availability of the SUBSEQUENT SYSTEM resulting from a successfully exploited vulnerability. While the Confidentiality and Integrity impact metrics apply to the loss of confidentiality or integrity of data (e.g., information, files) used by the system, this metric refers to the loss of availability of the impacted system itself, such as a networked service (e.g., web, database, email). Since availability refers to the accessibility of information resources, attacks that consume network bandwidth, processor cycles, or disk space all impact the availability of a system.
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:L/VA:N/SC:N/SI:N/SA:N

EPSS score

0.085%
(37th percentile)

Weaknesses

CVE ID

CVE-2023-47627

GHSA ID

GHSA-gfw2-4jvh-wgfg

Source code

Credits

Loading Checking history
See something to contribute? Suggest improvements for this vulnerability.