ngrok4com is hub4com GUI and KiTTY helper for configuring remote devices by serial port
Helps KiTTY communicate with a hub4com over firewalls via ngrok.com
Помогает KiTTY взаимодействовать с hub4com через брандмауэры с помощью ngrok.com

• Vyacheslav Frolov - for com0com and hub4com
• Simon Tatham, Cyril Dupont - for KiTTY
• ngrok - for ngrok
• Balázs Szalkai - for Greenfish Icon Editor Pro
• Katayama Hirofumi MZ - for RisohEditor

• git clone https://github.com/abakum/ngrok4com
• place NGROK_AUTHTOKEN.txt to ngrok4com\ before build for embed or set env during run
• place NGROK_API_KEY.txt to ngrok4com\ before build for embed or set env during run
• place hub4com.exe to ngrok4com\bin\ before build for embed
• place kitty_portable.exe to ngrok4com\bin\ before build for embed
• on remote PC with COM7
  • run ngrok4com 7
• on local PC
  • install com0com
  • setup COM11 for KiTTY by running
    com0com\setupc.exe install 0 PortName=COM#,RealPortName=COM11,EmuBR=yes,AddRTTO=1,AddRITO=1 -
  • run ngrok4com for control remote device over COM7 of remote PC

Look more