NOTE:If you find any question, please feel free to contact us by email: [email protected]

• 📁 P802 Series: P802M/P802N/P802Q/P802C
• 📁 Z5 Series: Z5/Z5S/Z5SM2/Z5SR2
• 📁 Z5X Series: Z5X/Z5XM2
• 📁 Z6 Series: Z6/Z6B/Z6F/Z6FB
• 📁 Z8 Series: Z8/Z8X/Z8S/Z8T/Z8P
• 📁 Z9 Series: Z9M2/Z9M3/Z9M4/Z9V5
• 📁 Z10 Series: Z10S/Z10M2

ATTETION:Please distinguish the control board model before upload firmware

🎥 How to download firmware bin(Hex) file and copy to SD card

1. Download the zip file and unzip it, you will got a firmware.bin file
2. Copy firmware.bin to the root directory of Micro-SD card
3. Power off the printer and plug the Micro-SD card into card socket of the control board
4. Power on the printer, wait about 30 seconds
5. Reset the EEPROM after uploaded firmware:
   • For LCD12864: "MENU>>Configuration>>Advanced setting>>initialize EEPROM"
   • For LCD_DWIN: "MENU>>Control>>Restore Defaults"

1. Download firmware upgrade tool: ⬇️.
2. Download HEX file and copy the hex file to the same directory with the tool.
3. Unzip "Arduloader.zip" , there is a user guide"Arduloader_user_guide.pdf" in this zip file, please read it.
4. Connect the printer to your PC, please make sure the driver has been installed correctly.
5. Follow "Arduloader_user_guide.pdf" to upload the firmware to your control board.

If your printer model is Z9M2, Z9M3, D805S, D806, please find the firmware from the below link:

• Firmware
• Sourcecode