Yuzuki Chameleon is a Raspberry Pi A Shaped SBC based on Allwinner H616
License: CERN Open Hardware Licence Version 2 - Strongly Reciprocal
Hackaday.io: https://hackaday.io/project/187166-yuzuki-chameleon
Purchase link: https://www.aliexpress.us/item/3256804825945922.html
Docker: docker pull gloomyghost/yuzukichameleon
- Based on Allwinner H616 chip, 4*Cortex A53
- HDMI supports 4K@60, supports up to 6K video decoding
- Up to 2GB RAM and 128GB eMMC storage
- Onboard eMMC and TF card slot
- Onboard XR829 WIFI+Bluetooth chip
- 4 USB Type C, 3 HOST and one OTG, support USB camera and capture card input
- Onboard fan slot, radiator fixing hole
- Lead out RJ45 100M interface
- Onboard 40 Pin GPIO, can expand SPI LCD display, Gigabit Ethernet, microphone array, CAN transceiver, temperature and humidity sensor, acceleration sensor and so on.
- AXP313A Power Solution
- Raspberry Pi A Size
H616 is a new-generation high picture quality 64-bit 4K@60fps decoding SoC provided by Allwinner for the OTT and IPTV markets. It integrates the quad core 64-bit CortexTM-A53 processor, and the new G31 GPU engine of ARM that supports OpenGL ES 3.2/Vulkan 1.1. Besides, H616 supports full-format 4K@60fps 10-bit ultra-HD video decoding, Allwinner self-developed SmartColor3.3TM picture enhancement engine, Dolby, and DTS audio processing. H616 adopts the new generation of power consumption technology, and reduces power consumption of 20% than the last generation.
You can find latest firmware at RELEASE We provide Tina Linux, Ubuntu, Android TV firmwares
root@root:~# docker pull gloomyghost/yuzukichameleon
root@root:~# docker run -it gloomyghost/yuzukichameleon
root@29a6b322d542:~# cd ~/
root@29a6b322d542:~# source build/envsetup.sh
root@29a6b322d542:~# lunch 1
root@29a6b322d542:~# mp -j12
https://github.com/dumtux/Allwinner-H616
The following mainly introduces the method of flash with PhoenixSuit. The flash method of LiveSuit and PhoenixUSBPro is similar.
Download PhoenixSuit:PhoenixSuit
Before using PhoenixSuit, you need to install the driver at the same time: Allwinner USB Driver
Enterprise developers will also install the Allwinner USB driver when installing APST, so there is no need to install it separately
Specific steps are as follows:
- Open PhoenixSuit, when the device is powered on and connected to the PC, PhoenixSuit will prompt to recognize the device;
- Click
One-click flash-browse
to select the firmware to be flashed; - Click
Upgrade now
, then a restart command will be sent to the device through USB, the device will restart with the programming logo, and enter the flash mode in the restart stage; - When the device returns to boot, it will be automatically programmed, and you can see that the progress bar of PhoenixSuit is moving;
- After the flash is successful, the device restarts.
If the software cannot automatically connect to the development board, please follow the steps below to force to the download mode:
- Power on the development board, press and hold the FEL button on the board
- Click the RST button
- After the PC is connected to the development board, release the FEL button
- Just wait for the download
https://github.com/dumtux/Allwinner-H616
Firmware based on the mainline can be directly accessed by using the dd
command