Information for how to add CCS to your LEAF, keeping it relevant for many years to come!

Integrate SmartEVSEv3 with HomeAssistant through custom component

A smart home interface for Sofar solar and battery inverters.

ESPHome control and monitoring of Sofar solar inverter

A smart home interface for Sofar solar and battery inverters.

An open source project implementing the basic functionality of the ISO IEC 15118 and also the DIN 70121 vehicle to grid (V2G) communication interface.

This software enables EV battery packs to be used for stationary storage in combination with solar inverters.

Converts a TI MCF8316A config (JSON) to a C file.

Grok open release

Fully Open CCS Charge Controller Interface with QCA7005 PLC modem

STM32 with QCA7005 as CCS charge controller

Smart Electric Vehicle Charging Station (EVSE)

Reverse engineering of the Tesla Model 3 battery bms control

Smart Electric Vehicle Charging Station (EVSE)

Controller for Tesla heatpump & SUPERMANifold

The MAXREFDES1301 reference design firmware enables quick evaluation of the MAX17852 and MAX17853 for 96V three-Wheeler BMS.

Prius Gen 3 buck/boost converter charger controller - buck mode charging

Prius Gen 3 buck/boost converter charger controller - buck mode charging

A tool to allow configuration and operating of openinverter systems for electric vehicles over a CAN connection

Code for the Linduino, An Arduino Uno-based board that is compatible with many Analog Devices evaluation boards

Class in C++ for arduino using LTC6813 ADC (Battery Monitoring for FSAE competition)

Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485

How to connect to a Sofar HYD3600 Inveter and 2 Pylontech US3000 batteries

Adding WiFi monitoring to US2000B and US2000C batteries.

Repurposes the openinverter main board as a buck or boost mode charger

Use openinverter hardware as an island (non-grid connected) inverter