Repository for the FlyatBlyat project.
Electrical information for the old and new hardware.
Lonely Green - GND
Servos
Green - GND
Blue - 5V
Yellow (Blue in same order) - Signal
ROBBE-BOI
Blue - DR
Lila - SEI
Gray - HÖ
Old battery: 9.6V, 500 mAh
New battery: 11.1V, 3000 mAh
Servos are driven by 5-6V (From the 4 AA Battery pack). They supply the RC-reciveer at the Ak connector.
The nr 1 pin is the PWM signal, pin 2 is the V+ and pin 3 is GND.
The old motor were driven directly by the battery voltage, that was 9.6V. Manual testing showed that the motor draws roughly 3 Amps at 10 Volts. (Using the high rated Mosfet 130W)