uhppoted implements a set of cross-platform building blocks for access control systems based on the UHPPOTE UT0311-L0x TCP/IP Wiegand access control boards. Currently available components include:

• device API
• external application API
• CLI for scripting and system administration
• REST service for integration with HTTP servers and mobile clients
• MQTT endpoint for integration with IOT systems e.g.
  • AWS IoT
  • Google Cloud IoT
  • IBM Watson IoT Platform
• AWS S3 integration for file managed access control lists
• Google Sheets integration for spreadsheet managed access control lists
• Integration with the [Wild Apricot] member management system
• Node-RED low code environment integration
• NodeJS

The components supplement the manufacturer supplied application which is 'Windows-only' and provides limited support for integration with other systems.

Supported operating systems:

• Linux
• MacOS
• Windows
• ARM7 (e.g. RaspberryPi)

This project is a fork of the original Go CLI project which had outgrown its initial scope and was relocated to uhppoted to simplify future development.

uhppoted-dll implements a shared-lib/DLL for interop with languages other than Go. The implementation includes bindings to:

• C
• C++
• C#
• Python
• Clozure Common Lisp

• ioBroker - kBrausew/ioBroker.wiegand-tcpip

As per this issue [Question] Compatible Hardware, UHPPOTE appears to be a specific branding (or distributor) for the access control boards manufactured by Shenzhen Wiegand Industrial Co., Ltd.

The software in this repository has been tested and is known to work with these specific boards:

Notes:

1. Firmware v6.62 sends anomalous listen events with 0x19 as the start of message identifier. This appears to have been fixed in later firmware versions but patches to support these events are included in:

• uhppote-core
• uhppote-simulator
• node-red-contrib-uhppoted
• uhppoted-nodejs

Almost any reader with a Wiegand-26 interface should probably work (there have been reports of offbrand readers that don't) but the readers below are in active use:

• v0.7.3: Adds uhppoted-dll shared-lib to components
• v0.7.2: Replaces event rollover with forever incrementing indices to match observed behaviour
• v0.7.1: Adds support for controller task list management
• v0.7.0: Adds support for time profiles. Includes bundled release of uhppoted-nodejs NodeJS module
• v0.6.12: Reworked concurrency and additional configuration
• v0.6.10: Initial release for uhppoted-app-wild-apricot
• v0.6.8: Adds handling for v6.62 firmware listen events to node-red-contrib-uhppoted
• v0.6.7: Implements record-special-events to enable/disable door events
• v0.6.5: node-red-contrib-uhppoted module for use with NodeRED low code environment
• v0.6.4: uhppoted-app-sheets Google Sheets integration module
• v0.6.3: Added access control list commands to uhppoted-mqtt
• v0.6.2: Added access control list commands to uhppoted-rest
• v0.6.1: Added access control list commands to uhppote-cli
• v0.6.0: uhppoted-app-s3 AWS S3 integration module
• v0.5.1: Initial release following restructuring into standalone Go modules and git submodules
• v0.5.0: Add MQTT endpoint for remote access to UT0311-L0x controllers
• v0.4.2: Reworked GetDevice REST API to use directed broadcast and added get-device to CLI
• v0.4.1: Get/set door control state functionality added to simulator, CLI and REST API
• v0.4.0: REST API service
• v0.3.1: Functional simulator with minimal command API
• v0.2.0: Load access control list from TSV file
• v0.1.0: Bare-bones but functional CLI

Binaries for Linux, Windows, MacOS and Raspbian/ARM7 are distributed in the tarball for each release. To install the binaries, download and extract the tarball to a directory of your choice.

The NodeRED and NodeJS packages are installable from the public repositories:

• node-red-contrib-uhppoted
• uhppoted-nodejs

uhppoted is the parent project for the individual components which are referenced as git submodules - to clone the entire source tree:

git clone --recurse-submodules https://github.com/uhppoted/uhppoted.git

The supplied Makefile has targets to build binaries for all the supported operating systems:

make build

or

make release

To pull upstream changes for all submodules:

git submodule update --remote

1. carbonsphere/UHPPOTE PHP
2. carbonsphere/DoorControl PHP
3. andrewvaughan/uhppote-rfid Python
4. tachoknight/uhppote-tools: Go
5. jjhuff/uhppote-go: Go
6. pawl/Chinese-RFID-Access-Control-Library
7. Dallas Makerspace:Reverse Engineering RFID Reader
8. wemakerspace/wiegand-daemon
9. wemakerspace/weigeng-js
10. realashleybailey/DoorControl
11. kBrausew/ioBroker.wiegand-tcpip
12. TCP/IP Wiegand Access Controller (Zutrittskontrolle)
13. YouTube: UHPPOTE 2 door basic set-up