Radovan Garabík https://kassiopeia.juls.savba.sk/~garabik/software/grc.html (garabik @ kassiopeia.juls.savba.sk)
For the impatient - try following commands:
grc netstat
grc ping hostname
grc tail /var/log/syslog
grc ps aux
Being overflooded with different logfile colo(u)?ri(s|z)ers, colortails, gccolors, colormakes and similar programs for making text files or outputs of different programs more readable by inserting ansi colour control codes into them, I decided to write my very own colouriser, eventually providing the functions of all those others.
Two programs are provided: grc
and grcat
. The main is grcat
, which acts as a filter, i.e. taking standard input, colourising it and writing to standard output.
grcat
takes as a parameter the name of configuration file.
Directories ~/.grc/
, /usr/local/share/grc/
, /usr/share/grc/
are searched for the file (in this order). If the file is not found, it is assumed to be an absolute path of a configuration file located elsewhere.
Configuration file consists of entries, one per regexp, entries are separated with lines with first character non-alphanumeric (except #). Lines beginning with # or empty lines are ignored.
Each entry consists of several lines.
Each line has form: keyword=value
where keyword is one of: regexp, colours, command, concat, skip, replace, count
Only regexp is mandatory, but it does not have much sense by itself unless you specify at least a colour, skip, replace or command keyword as well.
regexp is the regular expression to match.
colours is the list of colours, separated by commas (you can specify only one colour), each colour per one regexp group specified in regexp.
if you use special colour name "previous", colour of the previous line of text will be used (actually, if both the first and last character of the previous line are of different colour than the default one, colour of the first one will be used).
Another special colour name "unchanged" will leave the colour unchanged, useful if you need some context for matching regular expression and you want to leave the colour of context unchanged.
Yet another special name is an arbitrary string enclosed in straight quotes. This string will be inserted directly into the output in front of the matching expression. The string will be eval'ed, so you can use usual python escape sequences.
This is useful on a 256-colour enabled xterm, where e.g. colours="\033[38;5;22m"
will give you a dark green (inspired by Rutger Ovidius). Caveat: the string cannot contain a comma. This is due to my laziness :-)
command is command to be executed when regexp matches. Its output will be mixed with normal stdout, use redirectors (>/dev/null
) if you want to suppress it.
concat is the name of a file which the current line will be appended to when the regexp matches.
skip can be skip=yes
, if that case the matched line is skipped (discarded from the output), or skip=no
, when it is not skipped. Default (if you do not have skip keyword) is of course not skipped.
replace means the regular expression match will be replaced by the value. All the preceeding regular expressions will be evaluated against the original text, but if they match and the replacement changes the length of the text, the colouring will stay at the same positions, which is probably not what you want - therefore put the replace
rule preferrably at the beginning of config file.
all the following regular expressions will be evaluated against the replaced text, not the original.
replacement is done by re.sub()
, therefore you can use anything python supports - in particular, \1
, \2
etc... to include text from the original matching groups, e.g:
regexp=(\d\d):(\d\d):(\d\d)
replace=\1h\2m\3s
will change time format from 09:43:59 into 09h43m59s
count is one of words: once, more, stop, previous, block or unblock
- once means that if the regexp is matched, its first occurrence is coloured and the program will continue with other regexp's.
- more means that if there are multiple matches of the regexp in one line, all of them will be coloured.
- stop means that the regexp will be coloured and program will move to the next line (i.e. ignoring other regexp's)
- previous means the count will be the same as for the previous line
- block marks a start of a multiline block of text, coloured with the same colour
- unblock, obviously, marks the end of such a block
example:
# this is probably a pathname
regexp=/[\w/\.]+
colour=green
count=more
this will match /usr/bin
, /usr/local/bin/
, /etc/init.d/syslogd
and similar strings and paint it with green.
Another example:
regexp=^-{1,2}\s{0,1}$
colours=red
count=block
-
regexp=^\s{0,5}$
colours=default
count=unblock
this will turn all correctly formatted mail signatures red.
Regular expressions are evaluated from top to bottom, this allows nested and overlapped expressions. (e.g. you colour everything inside parentheses with one colour, and if a following expression matches the text inside parentheses, it will be also coloured).
grcat conf.log < /var/log/syslog
/usr/sbin/traceroute www.linux.org | grcat conf.traceroute
grcat conf.esperanto < Fundamento.txt | less -r
To facilitate the use, command grc
acts as frontend for grcat
, automatically choosing the configuration files, so you can write:
grc netstat
grc ping hostname
grc tail /var/log/syslog
etc...
grc
will execute command command with optional parameters piping its stdout into grcat
.
Configuration file for grcat
is determined by /etc/grc.conf
or ~/.grc/grc.conf
file.
Format of /etc/grc.conf
or ~/.grc/grc.conf:
each entry consists of 2 lines, between entries there can be any number of empty lines or lines beginning with # (comments).
First line is regular expression, second line the name of configuration file for grcat
.
Configuration file after the first regular expression matching the rest of line after grc
will be passed to grcat as its configuration file
For example, if you have
# log file
\b\w+\b.*log\b
conf.log
# traceroute command
(^|[/\w\.]+/)traceroute\s
conf.traceroute
in your /etc/grc.conf
, then typing grc cat /var/log/syslog
will use conf.log
to colourise the output, grc /usr/sbin/traceroute www.linux.org
will use conf.traceroute
.
You should get yourself familiar with regular expressions. Good reading is at https://docs.python.org/dev/howto/regex.html
The program is not yet optimized for speed. There are places that can give a big boost if optimized.
Regular expressions are handled by python, it means that they may be slightly different from those you know from perl or grep. It's not my fault in that case.
Colours are one of:
none, default, bold, underline, blink, reverse, concealed,
black, green, yellow, blue, magenta, cyan, white,
on_black, on_green, on_yellow, on_blue, on_magenta, on_cyan, on_white
beep
on_red
means that the background (instead of foreground) is painted
with red etc...
Additional colours can be: dark, italic, rapidblink, strikethrough
.
These are supported only on some terminals, so if you want to write
portable configuration files, avoid uing them (idea by James Rowe).
there can be more attributes per line (separated by space), e.g.
# this is probably a pathname
regexp=/[\w/\.]+
colours=bold blink green
count=more
will display pathnames in bold blinking green
both grc and grcat are targetted towards python3 now; there is an attempt at python2 compatibility, meaning that both grc and grcat will run under both python2 and python3. However, all the regular expressions are strings, and grcat works on string input (not bytes).
Following commands will display nice coloured log in virtual console 12:
If you have GNU tail:
tail --follow=name /var/log/syslog | grcat conf.log >/dev/tty12
or, if you have recent BSD tail:
tail -F /var/log/syslog | grcat conf.log >/dev/tty12
You can start using grc automatically with supported commands. The following assumes that grc.<sh|zsh|fish>
is in /etc
. The location may differ (i. e. /usr/local/etc
when installed with homebrew); or the grc.sh
can be placed into /etc/profile.d/
(this is in fact the default). Be aware this is somewhat invasive and better test it before deploying.
To set aliases for supported commands, append to your ~/.bashrc
:
GRC_ALIASES=true
[[ -s "/etc/profile.d/grc.sh" ]] && source /etc/grc.sh
If the file /etc/default/grc
exists, it is sourced first, therefore you can place a line saying GRC_ALIASES=true
there.
Or for zsh users, append to ~/.zshrc
:
[[ -s "/etc/grc.zsh" ]] && source /etc/grc.zsh
Add to ~/.config/fish/config.fish
or in a new file in ~/.config/fish/conf.d/
:
source /usr/local/etc/grc.fish
By running the follow code, it will check to see what programs are already installed on your OS (based on your $PATH
), and echo out the result. This could then be added to your shell resource file as a one off. Alternatively, by removing the echo
in the code, it could be placed into your shell resource file directly, and it will create the necessarily aliases each time:
for cmd in g++ gas head make ld ping6 tail traceroute6 $( ls /usr/share/grc/ ); do
cmd="${cmd##*conf.}"
type "${cmd}" >/dev/null 2>&1 && echo alias "${cmd}"="$( which grc ) --colour=auto ${cmd}"
done