Skip to content

TheWhite147/pi-score-counter

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

pi-score-counter

Raspberry Pi score counter for games.

How it works?

  • A Python script records every button action with the GPIO implementation from the Raspberry Pi.
  • Every action is saved in a SQLite database
  • A web interface will connect to that database to offer a UI to the program

What does it look like?

Player selection screen

Player selection screen

Statistics screen (shown after 30 seconds of inactivity)

Statistics screen

In-game screen

In-game screen

In-game screen (game over)

In-game screen - Game over

GPIO Inputs

  • Player 1 - Button A (GPIO23) was GPIO18 before 1.4.0
  • Player 1 - Button B (GPIO24)
  • Player 2 - Button A (GPIO22)
  • Player 2 - Button B (GPIO17)
  • Reset button (GPIO25)

GPIO Electrical Diagram

Buttons

Electrical diagram

NFC Reader

NFC Reader electrical diagram

Use of buttons

  • Always
    • Reset button: Resets the system to the home page
  • Before a game
    • Button A - Change player
    • Button B - Select player
  • During a game
    • Button A - Increase score
    • Button B - Decrease score

Game flow

  • Each players selects his name from the list of available players by using the A and B buttons (data will be prefilled)
  • When every players has selected his name, the game starts and the score is 0-0
  • By using buttons A or B, the players can make increase/decrease their score
  • When the game is over, the system returns to the home page when any button is pressed, and the flows restarts
  • Any time that the Reset button is pressed, the system returns to the home page
  • If the score is 0-0 and a decrease button is pressed, the system will return to main menu and cancel the current game

Default config and rules

  • The default config is based on Table Tennis Canada rules
  • Every games are 11 points
  • If there is an equality at 10-10, the game will finish when the difference of points is 2

Statistics

  • Every game is saved in the database with the score
  • An ELO based ranking algorithm is implemented to assign a rank to each player
  • A leaderboard is also shown after 1 minute of inactivity while in the main menu
  • 15 games are required to be ranked

Seasons (new in 1.3.0)

  • Season have been implemented in web/js/season.js
  • You can change the variables values in this file to enabled season features
  • The statistics will be computed within the range of the given dates for the active season
  • Only 5 games are required to be ranked during a season

Player selection with NFC (new in 1.4.0)

  • You can now select a player by using a NFC chip
  • You simply have to write the player's id on the NFC chip with the game/create_player_chip.py script (player's id in arguments)
    • sudo python create_player_chip.py [PLAYER_ID]
  • To setup the NFC Reader, please the section NFC Reader installation

Installation

  • Simply run install.sh in the install directory
  • Make sure pigpio is installed on your Pi (should already be installed)
  • Run whereis pigpiod and add it to your crontab at reboot
    • Example: @reboot /usr/bin/pigpiod
  • If you want to install the NFC reader to choose players faster, please read the next section: NFC Reader installation

NFC Reader installation (new in 1.4.0)

GO TRONIC manual gives these instruction to make the NFC Reader work.
See more info at https://www.gotronic.fr/pj2-sbc-rfid-rc522-fr-1439.pdf
For the wiring, please read the section GPIO Electrical Diagram

On a Raspberry Pi, you should already have this installed:

  • Run sudo apt-get install python-pip python-dev build-essential
  • Run sudo pip install RPi.GPIO
  • Run sudo apt-get install python-imaging

Then follow these steps to enable SPI

  • Run sudo raspi-config
  • Search for the option Enable/Disable automatic loading of SPI kernel module and enable it (name and menu can differ from a Pi to another)
  • Reboot your Pi

After reboot, follow these steps:

  • Go in the game/SPI-Py folder
  • Run sudo python3 setup.py install

Execution

  • Run start.sh that was copied in /home/pi/Desktop

Update

  • Run update.sh in the install folder to update the code directly on your Raspberry Pi