The Cessna 310 family modelled for FlightGear
Put the contents of this repository into a directory of your choice by either
git clone
ing it:~$ cd /some/path/Aircraft /some/path/Aircraft$ git clone https://github.com/TheFGFSEagle/c310-family
- or downloading the repository as a ZIP file and unzipping it with your favorite archive manager into
/some/path/Aircraft/c310-family
(make sure to remove the trailing-master
from the directory name !)
Then, tell FlightGear to search /some/path/Aircraft
for aircraft by either
- adding
/some/path/Aircraft
to the list of additional aircraft folders in the Addons tab of FGLauncher - or passing
--aircraft-dir=/some/path/Aircraft
on the command line.
No matter which of the methods above you use, make sure that you put this into /some/path/Aircraft/c310-family
and pass /some/path/Aircraft
to FlightGear to search for aircraft in - if you change Aircraft/c310-family
to anything else, FlightGear will NOT be able to find and load the 3D model !
- Cessna 310A
This aircraft is currently being worked on by @ysopflying, chad3006 (on the forum) and @TheFGFSEagle.
- Exterior 3D model only missing some details like gear actuators etc.
- Interior model: Seats, fuel selectors, engine controls, doors, yokes, most switches, most instruments, all circuit breakers, … are modelled and fully interactive.
- FDM: Work in progress by @ysopflying, using wind tunnel data from a C310P and OpenVSP to adapt that to the C310A.
- Systems: Propeller feathering, oil system, engine overheating, lights …
- Equipment: Optional auxiliary fuel tanks, right landing light and rotating beacon are available
- Some failures are implemented