A 3D-Printed Case for the Let's Split Vitamins Included Keyboard (Original Let's Split Keyboard by Wootpatoot)

These Cases were designed from the PCB Files graciously open-sourced by Duckle29 HERE ON GITHUB

You Will Need The Following Hardware to Assemble Each Side:

• x4 M2x6mm Heat Set Inserts (8 In Total)
• x4 M3x6mm Heat Set Inserts (8 In Total)

Both of these can be found HERE on Amazon.com in a Single Purchase item.

• x4 M2x12mm or M2x14mm Screws (8 In Total)
• x4 M3x4mm or M3x6mm Screws (8 In Total)

*Print is Designed to be .15mm Resolution or Higher.

*Plate is set at 1.6mm for Standard Thickness of Prefered Lasercut Manu. SendCutSend.com