Skip to content

An ADSB open source decoder for the airspy

License

Notifications You must be signed in to change notification settings

TLeconte/adsbdec

Repository files navigation

Adsbdec

An ADSB open source decoder for the airspy R2 and RTLSDR

Usage

adsbdec [-a] [-b] [-e] [-m] [-g gain] [-f filename] [-s addr[:port]]

By default receive samples from airspy and output adsb frames (DF11/DF14/17/18/20/21) in raw avr format on stdout

Options

-a : output short frames too
-e : use 1 bit error correction
-m : output avrmlat format (ie : with 12Mhz timestamp)
-b : output binary beast format
-g 0-21 : set linearity gain (for rtlsdr -g in tenth of db (ie : -g 450))
-f : input from filename instead of airspy (raw signed 16 bits real format)
-s addr[:port] : send ouput via TCP to server at address addr:port (default port : 30001)
-l addr[:port] : listen to addr:port (default port : 30002) and accept a TCP connection where to send output 

Man could use adsbdec to send data to any other avr format compatible server (VRS, feeders for main adsb web site, etc )

Example

For VRS select "Push receiver" , "AVR format", and :

adsbdec -e -s 192.168.0.10:30001

If you need that adsbdec act as server (like dump1090) :

adsbdec -e -l 192.168.0.10:30002

Compile

Need gcc cmake libusb-dev and libairspy-dev or librtlsdr-dev

Just do

mkdir build ; cd build

cmake -Dairspy=ON .. ; make ; sudo make install

or

cmake -Drtl=ON .. ; make ; sudo make install