Skip to content

TGit-Tech/AgIrrigationRemoteControl

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

56 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

AgIrrigationRemoteControl

Control an Ag Industrial 3-Phase Irrigation Pump with Arduino UNO and XBee RF

Hand Remote

Overview

  • A solid rural 2-Mile range; possibly more ( 900MHz @ 1/4-Watt Transceiver )
  • No cellular, FCC liscensing or any other charges; Just hook it up and use
  • One Hand-Remote can control multiple irrigation pumps
  • Multiple Hand-Remotes can control one irrigation pump
  • Uses Pump Panels "AUTO" selection; doesn't disturb Manual Hand-Off & Start sequences
  • Implements a "stay-off" after a power loss that is required by power companies
  • Hand-Remote has settable Alarms that signal (via buzzer) unexpected conditions such as:
    • Power not as expected ( Alarms when pump shutdown has occured by a power loss )
    • Water Pressure ( if equipped ) for when a hose falls off
    • Ditch Water Level ( if equipped ) too high or low
  • Simple expansion of a digital pressure gauge for water pressure monitoring
  • Simple expansion of an Ultrasonic distance meter for water level monitoring

I'll Build one for you!

I'll be building a few of these units complete with

  • (1) Hand-Remote; Custom programmed to your irrigation setup
  • (1) Pump-Controller; Custom programmed to your irrigation setup
  • (1) Installation Kit including:
    • The required 480VAC 3-phase Power Supply
    • A 480VAC or higher Solid State Relay for Motor Starter Control
    • 600V THHN Hook-Up wire required to Motor control installation

Purchase for $329 at: https://www.etsy.com/listing/525674784/agriculture-3-phase-480vac-irrigation

If you'd like to purchase just a single unit or the Water-Level and Pressure expansion kits; you can email me directly at [email protected]

Installation Kit