Skip to content

Systm21/Zaribo-MK3

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Zaribo-MK3 Rel. 3.0

Zaribo-MK3 Rel. 3.0

Introduction

Welcome to the Zaribo github project page!

Zaribo 320 and Zaribo 220 are available as a full build or as a kit. You can also mod your Original Prusa printers to Zaribo 320 and Zaribo 220 with upgrade kits. Numbers are indicating the Z-Axis height. They are all featuring 3030 Aluminium Extrusions and improved plastic parts for rigidity, accuracy and speed. Both mods are almost identical except the Z-Axis motors and rods. You need longer lead screws for 320 build and you can buy identical quality stepper motors from Zaribo.com which have been used on the Original Prusa MK series.

Special thanks to all our members for the contribution as the project is growing within an exceptionally friendly and courteous platform. 🙏

Where to buy

Zaribo.com is the webshop for high-quality genuine parts you may need for your builds including heated beds, motors, screws, nuts, controller boards and even extruder springs.

Zaribo.com only sells tested, high-quality genuine items from Bondtech, E3d, Microswiss, Capricorn, Slice Engineering, LDO, Misumi, and Meanwell.

Thanks

There are many people who have contributed on one form or another to the project. We like to thank everybody who inspired or supported us. Many ideas were discussed in the facebook groups:

Official Zaribo Facebook Group: German Zaribo Group:

Very special thanks to 3d-Gussner and Bernd Brinkert for their huge support and effort in providing and testing Zaribo firmware.

Thank you Rebecca and Jason from LDO Motors and Martin from Bondtech for the quality manufacturing and relationship.

Thanks to our other supplier: E3d, Microswiss, Slice Engineering, Misumi for delivering high quality products to us.

Sources

We give references that have influneced the design. Since the majority of plastic parts (even if much improved and somehow "new and different") have their roots in the initial design by Prusa Research we like to mention this a first and most influential reference.

Frame

y-rodholder:

y-bearing holder

  • the clamp mechanism is similar to one used on the x-axis. We like to mention that the first clamp design with insert for the carriage for the bearings holders was done by Vecko Kojchevski https://www.thingiverse.com/thing:2930007

x-MotorHolder and X-Idler

x-carriage

z-Top Holder

z-Motor Holder:

Meanwell PSU-holder

Extruder of Rel. 2 that still can be used instead of the Bondtech extruder

STL for PrusaSlicer as background

  • thanks to Patrick Vosshans

Mosquito PFTE cutting tools

Earlier Releases were partly designed by or influenced by: