This is an utility for programming small keyboards like this one:

Such keyboards are popular on AliExpress and seller usually sends software for programming, but it:

• requires Windows,
• is very ugly and inconvenient,
• can only program one key at a time
• don't expose all keyboard features

There are several modifications of such keyboards with different number of buttons and knobs (see some photos) and with/without Bluetooth.

Both wired and wireless keyboards are supported, however programming is possible though wire only in both cases!

Utility was reported to work with:

• 3×4 with 2 knobs (Bluetooth version)
• 3×3 with 2 knobs
• 3x2 with 1 knob
• 3x1 with 1 knob (but read about it's limitations)

All these keyboards share same vendor/product IDs: 1189:8890 (hexadecimal). It is possible to override used vendor/product ID, but it is usually not needed. Use it only if you find same-looking keyboard with other vendor/product ID, I haven't seen such.

Ability to override vendor/product ID doesn't mean that you can use this software for programming arbitrary keyboards!

Download latest release from GitHub releases

Install cargo utility using rustup, then execute cargo install ch57x-keyboard-tool.

Note: on Windows you need to install USBDK first.

Now create you own config from provided example-mapping.yaml. Example config has extensive documentation and examples inside.

You can validate config:

./ch57x-keyboard-tool validate < your-config.yaml

Use 'show-keys' command to list all supported modifier and key names.

Finally, upload config to keyboard:

./ch57x-keyboard-tool upload < your-config.yaml

Use 'sudo' if you get 'Access denied (insufficient permissions)':

sudo ./ch57x-keyboard-tool upload < your-config.yaml

You can also change LED configuration, if you keyboard supports it:

./ch57x-keyboard-tool led 1

Use Get-Content for input redireciton:

Get-Content your-config.yaml | ./ch57x-keyboard-tool validate

The frequent question is "How to run script / emulate several keys / … on key press?" This tool does just one job — writes your key bindings into keyboard and then exists, it does not listen for pressed key. If you want any automation, use third-party automation tools, like BetterTouchTool or dozens of other.

1. Choose some chord you don't usually use, like 'alt-ctrl-shift-1' and assign to some key
2. Use third-party tool to listen for this chord and perform action you want.
3. Done!

All keyboards I've seen have three layer (three keys configuration which may be switched). However I've been told there are keyboards without layer switch. If so, just keep single layer in configuration file and you are done.

If you use custom keyboard layout, like Dvorak, note that what you write in configuration is in fact scan code of keyboard key and not character that will be produced.

So use QWERTY-letter of keyboard key you want to press.

This modification does support key modifiers (like ctrl-, alt-) for the first key in sequence only.

So you can use: ctrl-alt-del,1,2, but not ctrl-alt-del,alt-1,2.

If you have any troubles using this software, please provide diagnostics.

ioreg -w0 -l -p IOUSB

or

system_profiler SPUSBDataType

lsusb -v

Most simple (and cross-platform) way I've found is using keyboard and mouse Python modules.

Monitoring keyboard:

pip3 install keyboard
sudo python3 -m keyboard

Monitoring mouse:

# Latest published 'mouse' module doesn't support MacOS, so use latest version from Git:
git clone https://github.com/boppreh/mouse
cd mouse
python3 -m mouse