A python 3 library which helps in using nmap port scanner. The way this tools works is by defining each nmap command into a python function making it very easy to use sophisticated nmap commands in other python scripts. Nmap is a complicated piece of software used for reconnaissance on target networks, over the years new features have been added making it more sophisticated.

With this python3-nmap we make using nmap in python very easy and painless

For example in nmap if you want to scan for common ports you would to something like this

$ nmap your-host.com --top-ports 10

But in this python3-nmap script you would do something like this

import nmap3
nmap = nmap3.Nmap()
results = nmap.scan_top_ports("your-host.com")
# And you would get your results in json

You will notice each nmap command is defined as a python function/method. this make it easy to remember this in python and easily use them.

Again in nmap if you want to use the famous dns-brute script you would do something like this

$ nmap your-host.com  --script dns-brute.nse

But in this python3 script again it's very easy you just do something like this

import nmap3
nmap = nmap3.Nmap()
results = nmap.nmap_dns_brute_script("your-host.com")

# And you would get your results in json
[
    {
        "address": "mail.your-host.com",
        "hostname": "68.65.122.10"
    },
    {
        "address": "www.your-host.com",
        "hostname": "5.189.129.43"
    }
]

Using this scripts is very easy, though it assumes you have nmap already installed, as it is the primary dependence required. Also this tools supports both windows and linux, it's cross platform so to say.

Installation

$ git clone https://github.com/wangoloj/python3-nmap.git

$ pip3 install -r requirements.txt

# Install nmap online

$ apt-get install nmap

# That's all is needed to get started

In nmap some commands require root privileges for example the command to identify OS requires root privileges;

$ nmap -O your-host.com

TCP/IP fingerprinting (for OS scan) requires root privileges.
QUITTING!
# Until you sudo

$ sudo nmap -O your-host.com

The same applies to the script to be able to run the os identifier you have to be a super user.

import nmap3
nmap = nmap3.Nmap()
os_results = nmap.nmap_os_detection("192.168.178.2") # MOST BE ROOT

[
    {
        "accuracy": "100",
        "cpe": "cpe:/o:linux:linux_kernel:2.6",
        "line": "45249",
        "name": "Linux 2.6.14 - 2.6.34",
        "osclass": {
            "accuracy": "100",
            "osfamily": "Linux",
            "osgen": "2.6.X",
            "type": "general purpose",
            "vendor": "Linux"
        }
    },
    {
        "accuracy": "100",
        "cpe": "cpe:/o:linux:linux_kernel:2.6.17",
        "line": "45775",
        "name": "Linux 2.6.17",
        "osclass": {
            "accuracy": "100",
            "osfamily": "Linux",
            "osgen": "2.6.X",
            "type": "general purpose",
            "vendor": "Linux"
        }
    },
    {
        "accuracy": "100",
        "cpe": "cpe:/o:linux:linux_kernel:2.6.17",
        "line": "45811",
        "name": "Linux 2.6.17 (Mandriva)",
        "osclass": {
            "accuracy": "100",
            "osfamily": "Linux",
            "osgen": "2.6.X",
            "type": "general purpose",
            "vendor": "Linux"
        }
    },
    {
        "accuracy": "100",
        "cpe": "cpe:/o:linux:linux_kernel:3.13",
        "line": "60884",
        "name": "Linux 3.13",
        "osclass": {
            "accuracy": "100",
            "osfamily": "Linux",
            "osgen": "3.X",
            "type": "general purpose",
            "vendor": "Linux"
        }
    }
]

The script is made of up the following classes, each holding different nmap abilities and scan types.

• Nmap
• NmapHostDiscovery
• NmapScanTechniques

In nmap if you want to identify versions you would run this kind of command

$ nmap 192.168.178.1  -sV

In this python script you would do something like this

import nmap3
nmap = nmap3.Nmap()
version_result = nmap.nmap_version_detection("your-host.com")

[
    {
        "cpe": [
            {
                "cpe": "cpe:/o:linux:linux_kernel"
            }
        ],
        "port": "80",
        "protocol": "tcp",
        "service": {
            "conf": "10",
            "extrainfo": "Ubuntu",
            "method": "probed",
            "name": "http",
            "ostype": "Linux",
            "product": "nginx",
            "version": "1.14.0"
        }
    },
    {
        "cpe": [
            {
                "cpe": "cpe:/o:linux:linux_kernel"
            }
        ],
        "port": "443",
        "protocol": "tcp",
        "service": {
            "conf": "10",
            "extrainfo": "Ubuntu",
            "method": "probed",
            "name": "http",
            "ostype": "Linux",
            "product": "nginx",
            "tunnel": "ssl",
            "version": "1.14.0"
        }
    },
    {
        "cpe": [
            {
                "cpe": "cpe:/o:linux:linux_kernel"
            }
        ],
        "port": "2000",
        "protocol": "tcp",
        "service": {
            "conf": "10",
            "extrainfo": "Ubuntu Linux; protocol 2.0",
            "method": "probed",
            "name": "ssh",
            "ostype": "Linux",
            "product": "OpenSSH",
            "version": "7.6p1 Ubuntu 4ubuntu0.3"
        }
    }
]

The following nmaps commands have been added to the following scripts

• get Nmap version details

  import nmap3
  nmap = nmap3.Nmap()
  results = nmap.nmap_version()

• Nmap top port scan

  import nmap3
  nmap = nmap3.Nmap()
  results = nmap.scan_top_ports("your-host")

• Nmap Dns-brute-script( to get subdomains )

   import nmap3
   nmap = nmap3.Nmap()
   results = nmap.nmap_dns_brute_script("domain")

• Nmap list scan

   import nmap3
   nmap = nmap3.Nmap()
   results = nmap.nmap_list_scan("your-host")

• Nmap Os detection

  import nmap3
  nmap = nmap3.Nmap()
  results = nmap.nmap_os_detection("your-host");

• Nmap subnet scan

   import nmap3
   nmap = nmap3.Nmap()
   results = nmap.nmap_subnet_scan("your-host") #Must be root

• Nmap version detection

   import nmap3
   nmap = nmap3.Nmap()
   results = nmap.nmap_version_detection("your-host") # Must be root

The script offers nmap scan techniques also as python function/methods

• nmap_fin_scan

  import nmap3
  nmap = nmap3.NmapScanTechniques()
  result = nmap.nmap_fin_scan("192.168.178.1")

• nmap_idle_scan

   import nmap3
   nmap = nmap3.NmapScanTechniques()
   result = nmap.nmap_idle_scan("192.168.178.1")

• nmap_ping_scan

   import nmap3
   nmap = nmap3.NmapScanTechniques()
   result = nmap.nmap_ping_scan("192.168.178.1")

• nmap_syn_scan

   import nmap3
   nmap = nmap3.NmapScanTechniques()
   result = nmap.nmap_syn_scan("192.168.178.1")

• nmap_tcp_scan

   import nmap3
   nmap = nmap3.NmapScanTechniques()
   result = nmap.nmap_tcp_scan("192.168.178.1")

• nmap_udp_scan

   import nmap3
   nmap = nmap3.NmapScanTechniques()
   result = nmap.nmap_udp_scan("192.168.178.1")

The script also offers support for map Added Nmap Host discovery techniques still as python function/methods

• Only port scan (-Pn)
• Only host discover (-sn)
• Arp discovery on a local network (-PR)
• Disable DNS resolution (-n)

NmapHostDiscovery

• def nmap_portscan_only(self, host, args=None)

   import nmap3
   nmap = nmapp.NmapHostDiscovery()
   results = nmap.nmap_portscan_only("your-host")

• def nmap_no_portscan(self, host, args=None):

   import nmap3
   nmap = nmapp.NmapHostDiscovery()
   results = nmap.nmap_no_portscan("your-host")

• def nmap_arp_discovery(self, host, args=None):

  import nmap3
  nmap = nmapp.NmapHostDiscovery()
  results = nmap.nmap_arp_discovery("your-host")

• def nmap_disable_dns(self, host, args=None):

  import nmap3
  nmap = nmapp.NmapHostDiscovery()
  results = nmap.nmap_disable_dns("your-host")

Nmap is a large tool, as you can see python3-nmap provides only things what you could say commonly used nmap features.

As we said, the script defines each set of nmap command as python function/methods. You can also pass arguments to those methods/function thus extending your capabilities for example. Let's say we want to scan top ports but also perform version detection .

   import nmap3
   nmap = nmap3.Namp()
   results = nmap3.scan_top_ports("host", args="-sV")

• Ethical-tools
• Wappalyzer online
• Whatweb online
• Raccoon By Offensive security
• Detect WAF
• Dnsdumpster
• Become a patreon
• Online port scanner