-
Schneider Electric
- @Hyderabad, IN
-
05:23
(UTC +05:30) - sumantkhalate.github.io
- pi_filter
Block or Report
Block or report SumantKhalate
Contact GitHub support about this user’s behavior. Learn more about reporting abuse.
Report abuseLists (1)
Sort Name ascending (A-Z)
Stars
Language
Sort by: Recently starred
The Trinamic TMC429 is a triple-axis dedicated step and direction motion controller for both position and velocity control with acceleration and deceleration trapezoidal ramps.
The TMC2209 is an ultra-silent motor driver IC for two phase stepper motors with both UART serial and step and direction interfaces.
This is an Arduino library that implements the slave/server logic of the Modbus RTU protocol.
Provides a number of additional Board and production house templates for KiCad
Open source flash program for the STM32 ARM processors using the ST serial bootloader over UART or I2C
This library interfaces with the Texas Instruments BQ27441 Battery Fuel Gauge using i2c
Communicates between Arduino-programmed AVR and Maxim DS3231 RTC: splice of Ayars' (http:https://hacks.ayars.org/2011/04/ds3231-real-time-clock.html) and Jeelabs/Ladyada's (https://github.com/adafruit/RT…
An STM32 HAL library for the DS3231 real-time clock IC.
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.
Small and simple software for plotting data from serial port in realtime.
Want to change the color scheme of KiCad? Look here for Inspiration.
scottbez1 / KiKit
Forked from yaqwsx/KiKitAutomation tools for KiCAD
Command Line, Python, and Node-Red for Super-Watchdog with Battery Backup for Raspberry Pi
An uninterruptible power supply for Raspberry Pi that can provide more than an hour of backup power and can shutdown the Pi safely.
Arduino library for the BQ27441 LiPo Fuel Gauge.
Texas Instruments BQ24296M Charger library for Arduino.
Buck boost regulator module that supports 3.5V-24V input, charging 1-4 cell batteries, and programmable USB OTG output from 4.48V to 20.8V
Arduino compatible single cell ultra low power LoRaWAN node
The schematic and 3D libraries for KiCad 4.0. Note that the footprint libraries are the *.pretty repos themselves. This is an orphaned repo, the news about the v5 libs, http:https://kicad.org/post/kicad-…