-
-
Notifications
You must be signed in to change notification settings - Fork 773
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Port "No Unsupported Perimeters" feature from SS #3189
Port "No Unsupported Perimeters" feature from SS #3189
Conversation
This needs testing. I wasn't able to get it going for myself in my implementation or in SuperSlicer, so I must be doing something wrong. I need someone who is familiar with the feature. |
Fantastic. |
Btw. |
Yes, it is not working. There was a special testing .stl for this feature, I need to Google it. |
The model I attached can test the case. |
Well, anybody any clue where the problem is? |
The issue is caused by These lines are missing from this PR: Update: apparently a few more places need to be updated accordingly (by replacing |
Good job @Noisyfox ! |
Next question: do we want to add support for arachne? |
Yes 👌🏻👏🏻🎉 |
SURE thing! |
Not sure how difficult it might be then. Are you going to do that? |
…ead of instance property
f607127
to
449a8e1
Compare
I have to be honest, a lot of the backend goes over my head as I am not entirely oriented in it. How different is arachne? Is it possible it is a drop in replacement? |
This wiki does a decent job of explaining. This whole option seems to be very experimental by the tone of the wiki. |
These two options (Bridges/Bridges and Overhangs) don't work in this PR at the moment. I suspect it might relate to the |
That was an educated guess on my part. SS has a config field that allowed the user to set and I was attempting to fill in the blanks
That was what I was going to do originally, but there was some interest in having all of the functions ported. I don't know if the limited functionality they provide is worth porting. |
Thank you for fixing the "core" part of this feature. Actually I am not sure what to do with other options... maybe it could be useful in some "edge" cases... there is a wiki post about it but... you have better knowledge of coding and printing, so you should make a decision if it is worth it or not |
IMO the only advantage those two options offer is that you can (sort of) turn them on for the entire model? Compare to the "fill void with bridges" option which you should only enable for certain area that has flat counter bore (because it could mess up with counter bore cones, as the wiki describes). Though I don't think that would justify the extra effort to make those options work, and the confusion they might cause. |
…rage Co-authored-by: supermerill <[email protected]>
Great, anybody else for testing? I will try tomorrow. Thx! |
Any progress on this one? |
Haha, ain't you the one who's making progress here? Joking aside, I will start reviewing and testing on it. |
Thanks @Ocraftyone for the initial port work. |
I really like the new names. Much more intuitive! |
* add UndoValueUIManager from PS from prusa3d/PrusaSlicer@32ff20d Co-authored-by: YuSanka <[email protected]> * Implement Preparation for Edit Custom Gcode Original Commit: prusa3d/PrusaSlicer@7db83d5 Co-authored-by: YuSanka <[email protected]> * Add first impl of EditGCodeDialog Only current issue is that the grabber for the resizeable window is currently white (ongoing issue for Orca) Original Commit: prusa3d/PrusaSlicer@a8307bf Co-authored-by: YuSanka <[email protected]> * Implement ParamsViewCtrl + GUI_App : Fixed update of the dark mode, when DataViewCtrl doesn't have header -Orca: currently doesn't seem to display dataview labels properly. TBD if it continues to be an issue. Original Commit: prusa3d/PrusaSlicer@c577b7f Co-authored-by: YuSanka <[email protected]> * Improved ParamsViewCtrl Original Commit: prusa3d/PrusaSlicer@59af551 Co-authored-by: YuSanka <[email protected]> * Partial Automation of getting Gcode placeholders Included pre-generated files specific to Orca rather than PS provided files Original Commit: prusa3d/PrusaSlicer@55d5921 Co-authored-by: YuSanka <[email protected]> * Implemented new grouping for the params Original Commit: prusa3d/PrusaSlicer@b2bd7f5 Co-authored-by: YuSanka <[email protected]> * Add parameter description Original Commit: prusa3d/PrusaSlicer@d652f15 Co-authored-by: YuSanka <[email protected]> * Edit Custom G-Codes Improvements Orca: Added option to use CMake config option ORCA_CHECK_GCODE_PLACEHOLDERS to check custom gcode placeholders rather than using debug Original Commit: prusa3d/PrusaSlicer@b8bb7f2 Co-authored-by: YuSanka <[email protected]> * Add wrapping description Original Commit: prusa3d/PrusaSlicer@83b8988 Co-authored-by: YuSanka <[email protected]> * Update Labels Original Commit: prusa3d/PrusaSlicer@7efdbec Co-authored-by: Lukas Matena <[email protected]> * Add fix for linux Original Commit: prusa3d/PrusaSlicer@361ef22 Co-authored-by: YuSanka <[email protected]> * Remove extraneous options * Fix duplicate else statement * Update Icons Add new icons from PS and update to use Orca color scheme Original Commit: prusa3d/PrusaSlicer@37afe79 Co-authored-by: YuSanka <[email protected]> * Remove SlicingState Options that aren't in Orca Also organized and added missing options to `s_CustomGcodeSpecificPlaceholders` * Improve checking placeholders Dialog now shows all issues within the same dialog If a custom gcode value is not specified within the config, a testing value is added. This ensures that (most) of the custom gcode is parsed, and thus checked against the definitions. * Make Compatible with wx 3.1.5 This should be reverted when wxWidgets 3.2.1 is re-implemented * Use proper config when checking for custom gcode make sure that the local copy of the config is being used when checking if there is custom gcode otherwise it would be possible it doesn't get run during testing * Don't show option if defined with type coNone * Add defs for custom gcode * Subgroup presets by page * fix spacing in tooltip * Check if cmake option is truthy rather than defined * Add the rest of the param defs Also added temperatures category to handle them * Override full config defs in non-preset categories * Remove unused code * fix linux compilation * Implement Search for GCode DataView * Add search term highlighting to EditGCodeDialog Now leaves text stored in ParamsNode un-formatted and uses flags to determine the formatting. The GetFormattedText function now returns the markup text. * Append extra parameters from preset If an option is not under a category in the tab but is part of the preset, it is added to the dataview. * Hardcode Location of Add Button Hardcoding it prevents the add button from jumping around when switching between parameters with single-line and multi-line descriptions * Remove Resizeable Border Helps with previous commit DataView currently doesn't resize vertically Also, at the moment, the resize grabber is not respecting dark mode and this solves that too. * Document building and debugging with XCode. (SoftFever#3733) * Document building and debugging with XCode. * Account for Intel Macs! * Fixes SoftFever#3721 - Typo in lang files (SoftFever#3722) * Update OrcaSlicer.pot * Update CreatePresetsDialog.cpp * Update OrcaSlicer_hu.po * Update OrcaSlicer_nl.po * Update OrcaSlicer_ja.po * Update OrcaSlicer_sv.po * Update OrcaSlicer_en.po * Update OrcaSlicer_tr.po - TURKISH translation update (SoftFever#3732) * Update OrcaSlicer_tr.po - TURKISH translation update * Update OrcaSlicer_tr.po - TURKISH translation update * elegoo_neptune4pro_buildplate_texture.png updated * Update OrcaSlicer_tr.po - TURKISH translation update * Update OrcaSlicer_tr.po - TURKISH translation update * Update OrcaSlicer_tr.po - TURKISH translation update --------- Co-authored-by: SoftFever <[email protected]> * Fix linux crashing when opening EditGcodeDialog * [FEATURE] Experimental small area flow compensation (SoftFever#3334) * [FEATURE] Experimental small area flow compensation This is a native implementation of the [Small Area Flow Compensation](https://github.com/Alexander-T-Moss/Small-Area-Flow-Comp) post-processor by Alexander Þór for OrcaSlicer. Quite often small areas of solid infill appear to be over-extruded, despite the rest of a print looking like it has a well-dialled-in EM/Flow. Currently, there isn't a good understanding of why this happens, so this is an attempt at a brute-force approach to treat the symptom. This feature modifies the flow of extrusion lines inversely proportional to the length of the extrusion line (the shorter the extrusion, the less flow it should have). Alexander Þór: Author of the original script implementation Weaslus: Proof Reader, Hypeman & pestered folks into making this * [TASK] Whitespace cleanup * [TASK] Add credits, format code, improve input labels * [TASK] Use multi-line textbox as input for flow model * [TASK] Toggle flow compensation per object * [TASK] Enable flow compensation for first layer --------- Co-authored-by: SoftFever <[email protected]> * Don't check the temperature of multi filament for multi toolhead printers (SoftFever#3649) do not check the temperature of multi filaments for multi toolhead printers * Allow specifying print order within each layer (SoftFever#3685) * Allow reordering objects regardless of print seq * Add option to control the layer print order * Sort object by their order in object list instead of id * Show print order when print order is the same as the object list * Ensure the print order when print order is same as object list * Update option name --------- Co-authored-by: SoftFever <[email protected]> * Add plate name edit btn (SoftFever#3756) * Re-enable printing by object gcode (SoftFever#3691) Re-enable printing by object gcide * Add project info editor (SoftFever#3754) * Add button to add model info * Initial impl of project info editor * Add sidebar item to edit project info * Add license selector * Fix use of deprecated apis * Fix license combox dark mode * Add back button on project info editor screen --------- Co-authored-by: SoftFever <[email protected]> * QoL: Some UI improvements to Cut Gizmo (SoftFever#3752) * Cut: Add color legend for upper & lower part * Cut: Make grabber larger * fix DE localization after feature updates (SoftFever#3746) * Retain mirror state when scaling using text input (SoftFever#3643) (SoftFever#3719) * Fixes for French translations (SoftFever#3773) * Fixes for French * Added missing translations * Revert to BBL get_line function * [BUGFIX] Prevent crash in small area infill comp with gcode comments (SoftFever#3786) Enabling the option "Verbose G-Code" would trigger a crash in the Small Area Infill flow compensation due to concurrent access/modification of the gcode comment. * Fix duplicate entry of Only Lift Z above and below in the extruder tab (SoftFever#3788) * Create SECURITY.md (SoftFever#3696) * Update Spanish translation (SoftFever#3793) * Update Spanish translation * Update Spanish translation * nightly release (SoftFever#3792) * nightly release * corrected printable_area (SoftFever#3527) * corrected printable_area * adjusted to keep origin at 0x0 * Debug Improvments on Windows (SoftFever#3275) * fix assert statements * Add ORCA_INCLUDE_DEBUG_INFO to deps cmake adds option ORCA_INCLUDE_DEBUG_INFO to deps build script to allow an alternative for RelWithDebInfo that works on windows * add build type option to windows script * update .gitignore to include build* * Creality K1 Profiles improvements (and K1C addition) (SoftFever#3728) * Added K1C and fixed some settings (took from config files instead of Creality Print) * Files renaming * New PLA-CF, prettify json for K1C, naming uniformisation, ... * Port Special PLA profiles to K1/K1 Max * Changed slow down layer time and slow down min speed in order to improve overall speed on details. * Raised PLA bed temp to 55°C * Optimisations for ABS, ASA and added Generic PC profile. * Added PA-CF and fixed PC profiles. * Added new filaments to default materials * QoL: Port profile value transfer on profile diff dialog from PrusaSlicer (SoftFever#3737) * DiffDialog: Implemented a transfer of options from one preset to another Related to [Feature Request] SoftFever#5384 - Copy values in Profile comparaison dialog Cherry-picked from prusa3d/PrusaSlicer@0b8d738 Co-authored-by: YuSanka <[email protected]> * Remove save button * Sync with latest PS * Use Orca button style * Show tips about trasnfer disabled --------- Co-authored-by: YuSanka <[email protected]> * Modifiers should load at object offset like in Prusaslicer (SoftFever#3802) * fix precedence errors Fix a handful of precedence errors and 1 logic/precedence error. None of the code will compile as intended without these changes. * Update GUI_ObjectList.cpp Modifiers should load at same offset as object they are created against. Based on prusaslicer ObjectList::load_from_files where it works correctly. --------- Co-authored-by: SoftFever <[email protected]> * Fix build errors on main branch caused by version string * Fix SoftFever#3311: filament Load / Unload time was not used in time estimation (SoftFever#3706) * Fix for SoftFever#3311: The `config.filament_load_time.values` and `config.filament_unload_time.values` are completely ignored. This was working in PrusaSlicer and apparently BBS converted the `GCodeProcessor::TimeProcessor.filament_load_times` and `GCodeProcessor::TimeProcessor.filament_unload_times` from being `std::vector<float>` to just `float` and they were using the BBS specific and currently hidden `machine_load_filament_time` and `machine_unload_filament_time` config values. Reverted that change by copying those lines from PrusaSlicer. * Fix for SoftFever#3311: Updated the previously fixed to code to keep compatibility with BBS printer . * Fix for SoftFever#3311: Updated `GCodeProcessor::get_filament_unload_time()` to keep compatibility with BBS printers. * fix PR build on lInux * handle the case when source file and target file is the same file * Update the naming of the layer order option to intra-layer order (SoftFever#3834) * Feature/merge 1.8.4 (SoftFever#3827) * FIX: the logic of buried points that were not buried JIRA: none Signed-off-by: Kunlong Ma <[email protected]> Change-Id: Id95174659c5fce7feba409eb5e14916608745fa4 * ci: update network module based on commit bc7ca98 Change-Id: I923526f0bf9ce5a288144fa1f9b0f2fc640f41b7 * Fix Firefox Co-authored-by: hadess <[email protected]> * FIX: cali: custom created filament from AMS displayed as incompatible jira: new remove the condition: is_system Change-Id: Ib1366966bbdbe01bc9e2483d9914d270ebefa976 * FIX: duplicated items in comboBox at calibration completed page jira: new Change-Id: I4749a2206df16c438e0d3098e36274b2a20f313e * ENH:update support for P1S plus jira:[for p1s plus] Change-Id: Id577d4e94e2162cb0045d261dfaa5f396ecded2f * ENH: CLI: add mk information support JIRA: no jira Change-Id: Idd89b143d439de50d9f52eb8aec95b262d66875d * ENH:calibration support p1p plus jira:[plus] Change-Id: Ia290d3a8a8b9adaac7a6ee26d9a8b5ea0c1b3aee * FIX: add log for base_id and filament_id github: SoftFever#3087 Change-Id: Iebfbd0f224fce49f33fc81c71e6108f6e3abb5ff * FIX: sync whole preset vendor directory Change-Id: I191dbe979a87ff35d38cab1149b7975664344838 Jira: STUDIO-5534 (cherry picked from commit 628866608116336453804aa1217dd55db04d47ad) * FIX: use t_utc for debug only Change-Id: Ia05d8969d4de3dd38908980d6e17a3ebb11ca279 Github 3045 Change-Id: I77935df53bbf2772b1146e5c330c537165a3a2e6 * FIX:make sort_volumes right Jira: STUDIO-5645 Change-Id: If324c9115bfaaf0c1b7b4be7c7ee96ba6b8ac890 * ENH:keep an unload logic jira:[for unload] Change-Id: Id30ec71ffa5b2dac89346ea47ca48a62479e3ab1 * FIX: several problems with mesh boolean 1. Cut with multiple volumes are OK now. 2. Close mesh boolean fail error with new object or open object 3. Fix wrong name and config of boolean resulting object github: SoftFever#3118 jira: none Change-Id: If2c9dbfb36cbdfe4917a2371217923891bb7909c (cherry picked from commit 982c0ecb92cf7c2b5ae5972ab900a6b10e7dda50) * NEW:limit the length of project name jira:[project name] Change-Id: I955620f7073b3b7fda280d1118524f561d047751 * ENH:adjusting the warning level of timelpase jira:[STUDIO-5662] Change-Id: I4902b22d316f5e09a97a62c88b8a98e55c405434 * FIX: 3mf specification: change namespace form slic3rpe to BambuStudio Jira: XXXX Change-Id: Id705affc875ef23fdf2ac6d79f0cb0aafc4f7050 * NEW: Open MakerWorld With BambuStudio GetParam JIRA: none Change-Id: I0d65b364f1cd2d634a88882ab072c3e61ea89167 (cherry picked from commit 8eaf45e5359439a7c796fd79876c86775abcf48e) * FIX: Filament issue generated when creating a printer Jira: XXXX Change-Id: I976770b69b47641bd54aa7a9c56fba7f58d1ab68 (cherry picked from commit ba42188b93c58b3954234d72acdd9769a68e3d3c) * FIX: Blank page appears when editing presets Jira: 5563 Change-Id: I4c49e05515b1beff55991e92f8079c4499c27eab (cherry picked from commit e86517d290f4cd0765a230d811b0ddf2c9f34c17) * FIX: context menu didn't update UI jira: STUDIO-5691 Change-Id: Ia66b8623d832eba805aff5320941233a68ff258b * FIX: crash of "filling bed" "get_arrange_settings() const" gets trapped in infinite recursive calling. Now we delete this function. jira: STUDIO-5688 Change-Id: Ia39974734bb37b2a2f06b5bf78185f01be726872 * FIX: boolean hangs in the middle of color painting Can't do splits in combine_mesh_fff, as do_boolean of mcut will split meshes. jira: STUDIO-5693 Change-Id: Idddb7d20dd7ca386c39ddd3d87d9defc3136aa5d (cherry picked from commit 6c67d015941458e37faaf0015b6509b5a0eadc0e) * Fix: Fix a number of compilation problems issues found when using gcc version 13.2.0 (GCC) in a Flatpak sandbox github : bambulab/BambuStudio#3074 github pull request: bambulab/BambuStudio#3096 Change-Id: I08aeac593eb1ce7675894df72e8489200bae713d (cherry picked from commit 069d133d66bfa682de4a860e379d5dc16b3d907c) * fix: macos icns issue when icon was not attached github pull request:bambulab/BambuStudio#3116 Change-Id: I49072ad49f3af7669a6d307c791594ade210da50 (cherry picked from commit c977e5582e3a30ad16dd267810037423aad9a53c) * FIX: Add flush_length for change_filament_gcode Change-Id: I30f4b97d3d61c2a57f0e92f157cbd31c38aa7265 Jira: XXXX (cherry picked from commit 92eb2bac977a0c4095b316cbbc6580fb5228b710) * FIX: edit preset dialog can't close on mac Jira: 5696 Change-Id: Ib33dfd07cc588ddd3805e3490a4d8c36dcd890ac * ENH: add dev_ota_version in ssdp JIRA: STUDIO-5740 Change-Id: Ic80e6d4b9bf82813fdc4a76604a3d36213d12b03 Signed-off-by: Stone Li <[email protected]> * NEW:Adapt to multicolour and gradient colour JIRA:xxxx Change-Id: I8084cab603d5681cbcaf2d6f5e0d7ad5419cb2af * NEW:Adaptation of semi transparent materials JIRA: XXXX Change-Id: Ie32d8ce67c37b85eb6d7d6594cb514a696307e68 * FIX: disable flush options if prime tower is unchecked jira: STUDIO-5639 Change-Id: I25081584d430bc7d062e14bcc2cdbf7522cf9d99 * ENH: refine GetVersion for HMS query JIRA: STUDIO-5763 Change-Id: Ia3ccc07d79cc0736eb12e9782da50211abb74772 Signed-off-by: Stone Li <[email protected]> * FIX: Prefer old selection when sync AMS not compatible Change-Id: I6b18db51887132a997cf78d70fff9a92e23bc44a Jira: STUDIO-5416 (cherry picked from commit 077fae29823cf4f3071d408b1b40f55ee0cb33c6) * FIX: The flushing was not auto-calc when sync ams list JIRA: STUDIO-5551 1. flushing volume auto-calc when sync ams list 2. flushing volume takes the larger calculation value when filament has multi-colors Signed-off-by: Kunlong Ma <[email protected]> Change-Id: I72e6f9780ea56103a44c2da6068440a4615c254d * FIX:fixed invalid links jira:[fixed link] Change-Id: I036a38b6e8e94da762f93805bd7be706538771fe * FIX: Prompt to delete problematic presets Jira: XXXX Change-Id: Ic43f7bb782794d7ab0b6acbffbb5d73e94f6ed73 * FIX:fixed incorrect HMS content jira:[STUDIO-5818] Change-Id: Ia2896d6f0ab1ffedbc850e54168acece8e47bdbb * FIX:external transparent material display error JIRA: STUDIO-5845 Change-Id: I0a4f05ac5d5c0ac49d85a704ee65a7221c5f1e1d * FIX: [5846] Custom Filament Page show System Filament Simultaneously solve: When downloading Preset from the cloud, the filament_id of the preset in m_preset is null. Jira: 5846 Change-Id: I6ba1b46fe92e345614b6a4af3fffa87d81fa2456 * FIX:A1 and p1 series do not support custom materials JIRA:XXXX Change-Id: Ib0459273d1f9a7152a5563757204634a8d0cd6f5 * FIX: exception when comparing profiles jira:[NEW] Signed-off-by: XunZhangBambu <[email protected]> Change-Id: I946b5fcd35f779d271df2b3de731fdcada5aab29 (cherry picked from commit 00e739570812e5c4be3e0f7702ce8c72c0f9e72b) * FIX: hide_id_middle_string Change-Id: I28f32ec526b443d31d7992971b80ab1cb737deb6 Github: STUDIO-5825 * ENH: modify some logs level JIRA: STUDIO-5958 Change-Id: I5a8592dfb8ffa9a81952535cb30944f867aa0e22 Signed-off-by: Stone Li <[email protected]> * NEW:build plate marker detect Change-Id: I70f03efea688bb6ce71c3f5990bb3c50605ab184 * FIX: Studio UI Freeze when saving user preset github: SoftFever#3335 Change-Id: Idaf53f673a3e46408826c06bdde2c592395d358b * update bbl plugin version * fix build errors * update bbl profiles * update color --------- Signed-off-by: Kunlong Ma <[email protected]> Signed-off-by: Stone Li <[email protected]> Co-authored-by: Kunlong Ma <[email protected]> Co-authored-by: gerrit <[email protected]> Co-authored-by: liz.li <[email protected]> Co-authored-by: tao wang <[email protected]> Co-authored-by: lane.wei <[email protected]> Co-authored-by: maosheng.wei <[email protected]> Co-authored-by: chunmao.guo <[email protected]> Co-authored-by: zhou.xu <[email protected]> Co-authored-by: Arthur <[email protected]> Co-authored-by: Bastien Nocera <[email protected]> Co-authored-by: zhimin.zeng <[email protected]> Co-authored-by: hu.wang <[email protected]> Co-authored-by: Stone Li <[email protected]> Co-authored-by: XunZhangBambu <[email protected]> * Fix asserts which would not compile. (SoftFever#3741) * Add Artillery Genius Pro Profile (SoftFever#3742) * add photos required for genius pro * add genius pro * add genius pro * add genius pro * added genius pro, changed bed temp to 60c, nozzle temp 200c * add genius pro, changed bed temp 60c, nozzle temp 200c * add genius pro * add genius pro and 0.4mm nozzle * elafant foot to 0.15mm, 2 walls * add genius pro print settings * add genius pro paths * Fixes 3833 ("Miss spelling") (SoftFever#3840) * Add the Polish language (SoftFever#3622) * Update localazy.json Add localization pl * Update Preferences.cpp Add polish language * OrcaSlicer_pl.po Add OrcaSlicer_pl.po * Update text.js Add pl_PL translate * Rename OrcaStudio_pl.po to OrcaSlicer_pl.po * Add files via upload * Update HMS.cpp * Add files via upload Update OrcaSlicer_pl * Update OrcaSlicer_pl.po * revert irrelevant change * fix one misspelling --------- Co-authored-by: SoftFever <[email protected]> * update locale * update plug-in page text * Add Devcontainer Support (SoftFever#3777) * add devcontainer files * update postCreate * add chmod for postCreate * set CORES env variable to pass to build tool * remove ssh functionality * Move delete env file cmd to postStartCommand * update how env file is done * Update - Move to older version of ubuntu for compatability - Change vnc password to orca * Prevent extra wall generation when sparse infill is zero (SoftFever#3775) Co-authored-by: SoftFever <[email protected]> * Refactor anker (SoftFever#3845) * Bring over bed and cover files * Initial refactored configuration file with placeholders for adding more nozzles * Uniqueify filament profiles * Initial refactored machine profiles * Remove placeholders * Correct machine selection flow * Correct Typo * Add placeholders to bring CE profile settings current with new format * Fixes SoftFever#3326 * Port 0.4 Normal Mode Profiles * Port fast mode profiles * Remove superfluous settings * Migrate existing filament profiles * Update available nozzles and default materials * Remove 'with' from file names * Remove 'with' from file names * Correct support object distance default * Correct transcription errors * Correct transcription error * Bring max_travel_detour_distance into convention with other profiles * Replace old profiles with the refactored profiles * Correct name used from Extra Draft to Superdraft * Re-use original names so printer profiles don't break --------- Co-authored-by: Geofrey Ward <[email protected]> * [Fix] Polish translation update (SoftFever#3855) * [Fix] Polish translation update * [Fix] Polish translation update text.js * Fixes Anker M5C profiles (SoftFever#3862) Fixes M5C profiles to use the old naming convention so they don't break existing M5c profiles Co-authored-by: Geofrey Ward <[email protected]> * Port "No Unsupported Perimeters" feature from SS (SoftFever#3189) * first impl * Properly handle extra bridges in `detect_surfaces_type()` * Pass `perimeter_spacing` and `ext_perimeter_width` as parameters instead of instance property * Make `process_no_bridge()` private * Attempt to run `process_no_bridge()` in arachne * Update `BridgeDetector::coverage` to give us more precise bridge coverage Co-authored-by: supermerill <[email protected]> * Fix bridge infill margin scaling * Rename the option name as well as add tooltip --------- Co-authored-by: Noisyfox <[email protected]> Co-authored-by: supermerill <[email protected]> Co-authored-by: SoftFever <[email protected]> * Fix DEBUG build (SoftFever#3861) * Fix asserts which would not compile. * Fix DEBUG build. Fully enable checking gcode placeholders in debug builds. * Update OrcaSlicer_tr.po - TURKISH translation update (SoftFever#3864) * Update OrcaSlicer_tr.po - TURKISH translation update * Update OrcaSlicer_tr.po - TURKISH translation update * elegoo_neptune4pro_buildplate_texture.png updated * Update OrcaSlicer_tr.po - TURKISH translation update * Update OrcaSlicer_tr.po - TURKISH translation update * Update OrcaSlicer_tr.po - TURKISH translation update * Update OrcaSlicer_tr.po - TURKISH translation update --------- Co-authored-by: SoftFever <[email protected]> * Update Spanish translation (SoftFever#3873) * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Revert "Merge remote-tracking branch 'upstream/main' into spanish_translation" This reverts commit 694a900, reversing changes made to 4f53ce4. * Revert "Update OrcaSlicer_es.po" This reverts commit 4f53ce4. * Revert "Revert "Update OrcaSlicer_es.po"" This reverts commit 53bd156. * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Revert "Update OrcaSlicer_es.po" This reverts commit b21aad0. * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_en.po * Update OrcaSlicer_es.po * Traduccion de OrcaSlicer al español * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po --------- Co-authored-by: SoftFever <[email protected]> * Enforce retraction before wipe (SoftFever#3888) enforce retraction before wipe * Change from "Back" to "Return" in the project tab (SoftFever#3867) * Add a new handy model: Orca string hell (SoftFever#3892) * add string hell * tweak message * Fix some rotation-related issues (SoftFever#3890) * Fix issue with max_z after rotation * Don't use `object.bounding_box()`, use `bounding_box_exact()` instead. * Fix auto-orient --------- Co-authored-by: SoftFever <[email protected]> * Fix issue with PA pattern test using travel acceleration and jerk for the PA patterns (SoftFever#3851) * Update orca_bot.yml (SoftFever#3798) * Update orca_bot.yml Just for discussion :) Also would be nice to set a different style of "stale" label, maybe with an icon... it is quite not visible on smartphone anr Github app. * Update orca_bot.yml * Fix issue with auto orient a scaled object. (SoftFever#3904) Partly revert 73ab032 * Update Polish translation (SoftFever#3903) * Improve ExtrusionLine::simplify, eliminating many very-short extrusion segments which led to blemishes in thin-wall models sliced with Arachne - Take 2 (SoftFever#3750) * Improve toolpath simplification to avoid blemishes when using Arachne on thin walls. * Avoid reducing closed perimeters below 3 points. Downstream code contains assumptions that closed ExtrusionLines are not degenerate. Open ExtrusionLines already are not reduced below 2 points by ExtrusionLine::simplify(). --------- Co-authored-by: SoftFever <[email protected]> * A *lot* of import fixes for flatpak (SoftFever#3909) * A *lot* of import fixes for flatpak Aside, thank you @hadess for the majority of these fixes. You are the base point for a lot of issues fixed during the creation of this flatpak. * Use slic3r::load_string_file Boost 1.84 removed `boost::fs::load_string_file` so use the func located in Utils.hpp * [Fix] Polish translation update (SoftFever#3934) * Update Polish translation * Update Polish translation * [Fix] Polish translation * [Fix] Polish translation update * [Fix] Polish translation * [Fix] Polish translation * [Fix] Polish translation * [Fix] Polish translation * 🔧 add Peopoly Magneto X profiles (SoftFever#3944) * Fix crashing on AMS filament edit (SoftFever#3981) * Update build_release.bat (SoftFever#3961) Missing double-quotes after "Visual Studio 16 2019 on lines 32, 33, 44 and 45. * Give CGAL a boost::prior (import) (SoftFever#3978) CGAL uses boost::prior but doesn't import it properly. A small hack here just imports it before importing anything CGAL. * New printer profile : TwoTrees SK1 (SoftFever#3982) * Initial profile for TwoTrees SK1 * Added PAUSE command instead of M601 and added machine_pause_gcode * Enabled multi bed types and removed skirt loop * Fixed non-ascii characters * Added PETG, PLA-CF plus clean ups and fixes. * Optimizations, and added PLA Silk * Maximum velocity is too high on Klipper settings, lowered to 730mm/s, this was obtained with Klipper Auto Speed * Ditto * Small optimizations * Added one layer to bottom for HSpeed profile * Update orca_bot.yml (SoftFever#3986) Update orca_bot.yml I hope this one will make Orca BOT happy again :) * Update Polish translation (SoftFever#3998) * Update Polish translation * Update Polish translation * Fixed and integrated some Italian translations (SoftFever#4008) * Update OrcaSlicer_it.po * Update OrcaSlicer_it.po * Update OrcaSlicer_it.po * Security: skip writing print_host and apikey in gcode (SoftFever#4030) * Creality Ender 3 and Prusa Mk3s 0,2;0,4,06 and 0,8 profiles (SoftFever#4029) * Ender 3 - All nozzles and Quality Profiles Ender 3 Profiles. 0.20 Nozzle 0.40 Nozzle 0.60 Nozzle 0.80 Nozzle 0.12 to 0.24 Quality Profiles for every Nozzle in Process Folder * all all * Ender 3 Profiles Ender 3 Profiles for: 0,2;0,4;0,6;0,8 5 Different and independent Quality profiles for each Nozzle. Fine, Optimal, Standard, Draft and Superdraft * aa aa * aa aa * aa aa * Prusa Mk3s Profiles Prusa Mk3s Profiles * Mk3s FIXED mk3s FIXED --------- Co-authored-by: SoftFever <[email protected]> * Update HMS.cpp set language code to en by default for PL language (SoftFever#4034) * Update HMS.cpp set language code to en by default for PL language * Creality Ender-3 V3 SE: Fix present print (SoftFever#4031) * Creality Ender-3 V3 SE: Fix present print * Decouple filament minimum print speed from overhang slowdown (SoftFever#3859) * fix Orca bot * New Language: Catalan language for OrcaSlicer 1.9.0 (SoftFever#4036) * Create OrcaSlicer_ca.po * New Language: Catalan language for OrcaSlicer 1.9.0 New Language: Catalan language for OrcaSlicer 1.9.0 * Add code changes to support Catalan --------- Co-authored-by: SoftFever <[email protected]> * skip .stl/.png file when copying system profiles * Russian translation update (SoftFever#4049) Russian translation update OrcaSlicer V2.0.0-dev + update text.js (added and translated missing lines) * Various Emboss improvements from PS (SoftFever#4039) * Fix: invalid distance from surface when load from 3mf Cherry-picked from prusa3d/PrusaSlicer@e1d9393 Co-authored-by: YFilip Sykala - NTB T15p <[email protected]> * Apply rotation angle given by style for new text object Turn off feature 'use_surface' for new text object Cherry-picked from prusa3d/PrusaSlicer@1cb156c Co-authored-by: YFilip Sykala - NTB T15p <[email protected]> * Store/Load align and per_glyph in Slicer.ini for text style Cherry-picked from prusa3d/PrusaSlicer@fe16f5b Co-authored-by: YFilip Sykala - NTB T15p <[email protected]> * Store undo/redo snap after stop input-sliding Cherry-picked from prusa3d/PrusaSlicer@fb4e471 Co-authored-by: YFilip Sykala - NTB T15p <[email protected]> * Initialize SvgFile object in optional different way. Cherry-picked from prusa3d/PrusaSlicer@0ff255e Co-authored-by: YFilip Sykala - NTB T15p <[email protected]> * SPE-2103 Make snap-shot to undo/redo stack only on release slider Connected with attributes: Text/advanced(char gap, line gap, boldness, skew ratio) SVG(size) Also change range for Boldness. VRT font-Ascent. (different font may have different slider value range) Fix line gap (it was denied when per glyph was false) Cherry-picked from prusa3d/PrusaSlicer@ee3546b Co-authored-by: YFilip Sykala - NTB T15p <[email protected]> --------- Co-authored-by: YFilip Sykala - NTB T15p <[email protected]> Co-authored-by: SoftFever <[email protected]> * Fixed typo "Confing" (SoftFever#4071) * Support profile OTA update for Orca Slicer (SoftFever#4069) profile ota support * Fix for SoftFever#4047 (SoftFever#4072) * Security: skip more print_host related info * Update orca_bot.yml (SoftFever#4044) * Update orca_bot.yml My mistake, now should be fixed. SoftFever@ef9ff99 * Update orca_bot.yml * Fixed Ender 3 profile inheritance (SoftFever#4089) Fixed 4087 * Make reporting easier - part I (SoftFever#4080) * Make reporting easier - part I Make reporting easier - part I * Update config.yml * Update bug_report.yml (SoftFever#4082) * Update bug_report.yml Make it easier and nice r.) * Update bug_report.yml * Update and rename feature_request.md to feature_request.yml (SoftFever#4084) * Update and rename feature_request.md to feature_request.yml * Update feature_request.yml * Update feature_request.yml * Update feature_request.yml * Update feature_request.yml * Update feature_request.yml * Bug Fixed: Added "Printer Variant" to all Ender 3 and Prusa Mk3s Profiles (SoftFever#4098) Added "Printer Variant" to all Ender 3 and Prusa Mk3s Profiles Bug Fixed: When selected only 1 profile from menu , Orcaslicer imports all nozzle from the printer. Added "printer_variant": "" for each nozzle. Now it imports correct only the selected nozzled in the menu. * Catalan Language updated to V1.9.1 (SoftFever#4131) * Fix for postprocessing scripts not working on UNIX when $SHELL is undefined (SoftFever#4101) Fix for PP scripts not working on UNIX when $SHELL is undefined thanks @jfbauer432 for pointing the problem out. thanks @lukasmatena for fixing it in PrusaSlicer (commit 87a5116) Co-authored-by: Lukáš Matěna <[email protected]> * Show dialog when opening 3mf files to choose whether to import settings. (SoftFever#4110) * Show dialog when opening 3mf files to choose whether to import settings. * Merge branch 'main' into main * Fix move gizmo on parts (SoftFever#4138) * Update Spanish translation (SoftFever#4142) * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Revert "Merge remote-tracking branch 'upstream/main' into spanish_translation" This reverts commit 694a900, reversing changes made to 4f53ce4. * Revert "Update OrcaSlicer_es.po" This reverts commit 4f53ce4. * Revert "Revert "Update OrcaSlicer_es.po"" This reverts commit 53bd156. * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Revert "Update OrcaSlicer_es.po" This reverts commit b21aad0. * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_en.po * Update OrcaSlicer_es.po * Traduccion de OrcaSlicer al español * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Update OrcaSlicer_es.po * Add new text translations for profile and filament management --------- Co-authored-by: SoftFever <[email protected]> * Fix object list crash on click (SoftFever#2823) (SoftFever#4164) * Fix caucluation of rotation between two vectors during auto-orient (SoftFever#4144) * Properly extract rotation matrix * Another attempt to fix auto-orient * Show warning notification if jerk is set to 1 * apply precise_outer_wall for inner-outer wall seq only * Show a warning dlg when enabling `Make overhangs printable` option Fixes SoftFever#4078 * FlyingBear profiles updates: abs filament (SoftFever#4165) * Update fdm_klipper_common.json * Update fdm_filament_abs.json * Update fdm_filament_pa.json * Update fdm_filament_abs.json * Update FlyingBear Generic ABS.json * Update fdm_klipper_common.json * InfiMech profile updates: Change some parameterts and Update ABS filament (SoftFever#4166) * Update InfiMech Generic ABS.json * Update fdm_filament_abs.json * TwoTrees SK1 Profiles : New filament (PLA Matte) and tuned volumetric flow rates (SoftFever#4172) * Increased max volumetric flow of PETG and PLA silk * New filament profile for TT SK1 : PLA Matte * Increased Max volumetric flow rate for PLA-CF * Allow specify wall directions (SoftFever#4156) * Add wall direction option * Force wall direction if specified * Format * Rename default to auto * Some tiny UI adjustment * Add direct adaptive bed mesh support (SoftFever#4212) * Add direct adaptive bed mesh support * fix Linux build error * update tooltip * Fixed a bug that caused bed textures to scale improperly Fixes SoftFever#1175 * Allow exporting filament profiles for non-bbl printers (SoftFever#4217) Allow exporting non-bbl profiles * General profile tweak 1. Adjust bed textures for some printer to accommodate bed texture scale bug fix d3309b9 2. Reduce some bed model size --------- Signed-off-by: Kunlong Ma <[email protected]> Signed-off-by: Stone Li <[email protected]> Co-authored-by: Ocraftyone <[email protected]> Co-authored-by: YuSanka <[email protected]> Co-authored-by: Lukas Matena <[email protected]> Co-authored-by: SoftFever <[email protected]> Co-authored-by: Seth LaForge <[email protected]> Co-authored-by: Eldenroot <[email protected]> Co-authored-by: Olcay ÖREN <[email protected]> Co-authored-by: Morton Jonuschat <[email protected]> Co-authored-by: Dylan <[email protected]> Co-authored-by: Noisyfox <[email protected]> Co-authored-by: Heiko Liebscher <[email protected]> Co-authored-by: Thomas <[email protected]> Co-authored-by: Ioannis Giannakas <[email protected]> Co-authored-by: Giveen <[email protected]> Co-authored-by: duub qnnp <[email protected]> Co-authored-by: Ryan Whipple <[email protected]> Co-authored-by: foghatredbird <[email protected]> Co-authored-by: Erkan Ozgur Yilmaz <[email protected]> Co-authored-by: Kunlong Ma <[email protected]> Co-authored-by: gerrit <[email protected]> Co-authored-by: liz.li <[email protected]> Co-authored-by: tao wang <[email protected]> Co-authored-by: lane.wei <[email protected]> Co-authored-by: maosheng.wei <[email protected]> Co-authored-by: chunmao.guo <[email protected]> Co-authored-by: zhou.xu <[email protected]> Co-authored-by: Arthur <[email protected]> Co-authored-by: Bastien Nocera <[email protected]> Co-authored-by: zhimin.zeng <[email protected]> Co-authored-by: hu.wang <[email protected]> Co-authored-by: Stone Li <[email protected]> Co-authored-by: XunZhangBambu <[email protected]> Co-authored-by: Mr-PBH <[email protected]> Co-authored-by: KrisMorr <[email protected]> Co-authored-by: Oleksii Suprun <[email protected]> Co-authored-by: Geoffrey Ward <[email protected]> Co-authored-by: Geofrey Ward <[email protected]> Co-authored-by: supermerill <[email protected]> Co-authored-by: Carlos Caruncho <[email protected]> Co-authored-by: Aidan <[email protected]> Co-authored-by: Peopoly <[email protected]> Co-authored-by: tsmith35 <[email protected]> Co-authored-by: frankieorabona <[email protected]> Co-authored-by: goyetus <[email protected]> Co-authored-by: Oleksii Dashkevych <[email protected]> Co-authored-by: davidjuanesb <[email protected]> Co-authored-by: Andy <[email protected]> Co-authored-by: YFilip Sykala - NTB T15p <[email protected]> Co-authored-by: pagdot <[email protected]> Co-authored-by: markleaf131313 <[email protected]> Co-authored-by: FlyingbearOfficial <[email protected]> Co-authored-by: InfimechOfficial <[email protected]>
Original Feature from SS
![image](https://private-user-images.githubusercontent.com/24759591/291496174-dae242ad-5cbf-4568-bc48-e4a42e2a9e64.png?jwt=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.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.9eOxlGFQ86ULAgEvG3Xbz7j8aiK5RmM4T6FAYNmwFNY)
fixes #2402