Fix 'drawAllInList' function #446

TakoTheDev · 2024-02-09T15:27:29Z

At least in the demo renderer it seems to not align correctly when any scaling is applied (Also fixes 3 minor issues: Dungeon Timer height is incorrect, the width and demo renderer for Giant Names don't use same length and the dungeon profit width is missing a +)

BEFORE

AFTER

(idk how to fix that very slight space after the heart of the Giant display)

pull-request-quantifier-deprecated · 2024-02-09T15:27:49Z

This PR has 9 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Small
Size       : +5 -4
Percentile : 3.6%

Total files changed: 3

Change summary by file extension:
.kt : +5 -4

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

src/main/kotlin/gg/skytils/skytilsmod/utils/RenderUtil.kt

pull-request-quantifier-deprecated · 2024-02-09T15:42:53Z

This PR has 11 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Small
Size       : +6 -5
Percentile : 4.4%

Total files changed: 4

Change summary by file extension:
.kt : +6 -5

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated · 2024-02-09T16:04:42Z

This PR has 10 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Small
Size       : +5 -5
Percentile : 4%

Total files changed: 4

Change summary by file extension:
.kt : +5 -5

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

TakoTheDev · 2024-02-10T10:32:09Z

Also as a side note, optifine seems to break the width calculations?

(Counts for both old and new editing gui, but can probably not be fixed easily so I'll just leave it like that)

src/main/kotlin/gg/skytils/skytilsmod/listeners/DungeonListener.kt

src/main/kotlin/gg/skytils/skytilsmod/features/impl/dungeons/ChestProfit.kt

Co-authored-by: Sychic <[email protected]> Signed-off-by: TakoTheDev <[email protected]>

pull-request-quantifier-deprecated · 2024-02-17T05:01:19Z

This PR has 29 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Small
Size       : +17 -12
Percentile : 11.6%

Total files changed: 6

Change summary by file extension:
.kt : +17 -12

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated · 2024-02-17T05:08:12Z

This PR has 12 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Small
Size       : +6 -6
Percentile : 4.8%

Total files changed: 6

Change summary by file extension:
.kt : +6 -6

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated · 2024-02-17T05:10:05Z

This PR has 10 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Small
Size       : +5 -5
Percentile : 4%

Total files changed: 5

Change summary by file extension:
.kt : +5 -5

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated · 2024-02-17T05:10:27Z

This PR has 10 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Small
Size       : +5 -5
Percentile : 4%

Total files changed: 6

Change summary by file extension:
.kt : +5 -5

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

TakoTheDev · 2024-02-17T05:11:41Z

I forgot to add [no ci] ;-;

pull-request-quantifier-deprecated · 2024-02-17T05:12:10Z

This PR has 10 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Small
Size       : +5 -5
Percentile : 4%

Total files changed: 6

Change summary by file extension:
.kt : +5 -5

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

Sychic

Remove the random newlines

pull-request-quantifier-deprecated · 2024-02-17T05:44:21Z

This PR has 10 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Small
Size       : +5 -5
Percentile : 4%

Total files changed: 5

Change summary by file extension:
.kt : +5 -5

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

src/main/kotlin/gg/skytils/skytilsmod/listeners/DungeonListener.kt

pull-request-quantifier-deprecated · 2024-02-17T05:46:35Z

This PR has 10 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Small
Size       : +5 -5
Percentile : 4%

Total files changed: 4

Change summary by file extension:
.kt : +5 -5

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated · 2024-02-17T05:47:18Z

This PR has 10 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Small
Size       : +5 -5
Percentile : 4%

Total files changed: 5

Change summary by file extension:
.kt : +5 -5

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

pull-request-quantifier-deprecated · 2024-02-17T05:48:52Z

This PR has 10 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!

Quantification details

Label      : Extra Small
Size       : +5 -5
Percentile : 4%

Total files changed: 4

Change summary by file extension:
.kt : +5 -5

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

Fast and predictable releases to production:
- Optimal size changes are more likely to be reviewed faster with fewer
  iterations.
- Similarity in low PR complexity drives similar review times.
Review quality is likely higher as complexity is lower:
- Bugs are more likely to be detected.
- Code inconsistencies are more likely to be detected.
Knowledge sharing is improved within the participants:
- Small portions can be assimilated better.
Better engineering practices are exercised:
- Solving big problems by dividing them in well contained, smaller problems.
- Exercising separation of concerns within the code changes.

What can I do to optimize my changes

Use the PullRequestQuantifier to quantify your PR accurately
- Create a context profile for your repo using the context generator
- Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
- Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
- Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
Change your engineering behaviors
- For PRs that fall outside of the desired spectrum, review the details and check if:
  - Your PR could be split in smaller, self-contained PRs instead
  - Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

One line was added: +1 -0
One line was deleted: +0 -1
One line was modified: +1 -1 (git diff doesn't know about modified, it will
interpret that line like one addition plus one deletion)
Change percentiles: Change characteristics (addition, deletion, modification)
of this PR in relation to all other PRs within the repository.

Was this comment helpful? 👍 :ok_hand: :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

TakoTheDev · 2024-02-17T05:49:40Z

It had a new line but without the \r\n thing ig?

* fix drawAllInList alignment * fixed a slight inconsistency * Remove color code from getStringWidth Co-authored-by: Sychic <[email protected]> Signed-off-by: TakoTheDev <[email protected]> --------- Signed-off-by: TakoTheDev <[email protected]> Co-authored-by: Sychic <[email protected]> cherry picked from 2c119f2

My-Name-Is-Jeff and others added 4 commits February 6, 2024 21:57

fix: dungeonlistener doesn't remove disconnected players

e818828

fix: dungeon secrets display doesn't show at 0 secrets collected

c67df09

fix drawAllInList alignment

893ac37

revert this so it stays inconsistent

13e2f8f

pull-request-quantifier-deprecated bot added the Extra Small label Feb 9, 2024

Sychic reviewed Feb 9, 2024

View reviewed changes

src/main/kotlin/gg/skytils/skytilsmod/utils/RenderUtil.kt Outdated Show resolved Hide resolved

fixed a slight inconsistency

a9d3572

Sychic gave me idea [no ci]

022ead6

TakoTheDev changed the base branch from 1.x to dev February 9, 2024 16:21

TakoTheDev changed the base branch from dev to 1.x February 9, 2024 16:22

My-Name-Is-Jeff force-pushed the 1.x branch from c67df09 to e125bc7 Compare February 16, 2024 05:41

Sychic requested changes Feb 17, 2024

View reviewed changes

src/main/kotlin/gg/skytils/skytilsmod/listeners/DungeonListener.kt Outdated Show resolved Hide resolved

src/main/kotlin/gg/skytils/skytilsmod/features/impl/dungeons/ChestProfit.kt Outdated Show resolved Hide resolved

Remove color code from getStringWidth

78189f6

Co-authored-by: Sychic <[email protected]> Signed-off-by: TakoTheDev <[email protected]>

TakoTheDev changed the base branch from 1.x to dev February 17, 2024 05:01

hopefully reverted correctly

98af7e5

hopefully reverted correctly

5838e53

hopefully reverted correctly

ec30a56

Merge branch 'dev' into fix_draw_all

5fec961

Sychic requested changes Feb 17, 2024

View reviewed changes

removed new line hopefully? [no ci]

f32b8af

Sychic requested changes Feb 17, 2024

View reviewed changes

src/main/kotlin/gg/skytils/skytilsmod/listeners/DungeonListener.kt Outdated Show resolved Hide resolved

added random new line? [no ci]

1bfd96c

now remove random new line? [no ci]

ea3d7a6

this? [no ci]

96bb07e

My-Name-Is-Jeff approved these changes Feb 29, 2024

View reviewed changes

My-Name-Is-Jeff merged commit 2c119f2 into Skytils:dev Feb 29, 2024

TakoTheDev deleted the fix_draw_all branch March 1, 2024 16:43

Fix 'drawAllInList' function #446

Fix 'drawAllInList' function #446

Conversation

TakoTheDev commented Feb 9, 2024 • edited Loading

pull-request-quantifier-deprecated bot commented Feb 9, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 9, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 9, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

TakoTheDev commented Feb 10, 2024

pull-request-quantifier-deprecated bot commented Feb 17, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 17, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 17, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 17, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

TakoTheDev commented Feb 17, 2024

pull-request-quantifier-deprecated bot commented Feb 17, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

Sychic left a comment

Choose a reason for hiding this comment

pull-request-quantifier-deprecated bot commented Feb 17, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 17, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 17, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

pull-request-quantifier-deprecated bot commented Feb 17, 2024

What can I do to optimize my changes

How to interpret the change counts in git diff output

TakoTheDev commented Feb 17, 2024

TakoTheDev commented Feb 9, 2024 •

edited

Loading