PCB for Access Control Yubikey OTP NFC Pi (ACYONP). For Raspberry Pi. This is a Door Access Control using Electronic Door Strike, with Yubikey OTP via NFC / KeyPad / WebInterface for Authentication.
Web interface shows the status of the whole system, along with the ability to enter pin/password/yubikey OTP string for authentication to unlock the door
Uses Inturrupt and Threads to minimise overhead, and to be non blocking as much as possible.
All options are completely customizable through the ini config file
The script ACYONP is design specificly for the Raspberry Pi.
SKaccess by Simon Kong
ACYONP-SMD-01.jpg
NFC Reader is at the top of the Box, inside. putting the yubikey on top of the box will scan the yubikey neo / yubikey 5 nfc.
ACYONP-webinterface-01.jpg
Ready to use PCB Board
https://www.skstore.com.au/electronics/pcb/ACYONP
PCB Design Files / gerber files
FYI Gerber files are in the release section
https://github.com/SkullKill/ACYONP-PCB/releases
more pictures in the wiki
https://github.com/SkullKill/ACYONP-PCB/wiki
ACYONP-SMD-Front-Red-RT-V1.2.jpg
ACYONP-SMD-Back-Red-V1.2.jpg
ACYONP-SMD-schematics-v1.2a.jpg
you will need a dupont crimp kit 2.54 / tool and / or jumper wires
e.g
Crimping Tool: 0.1-1.0 mm² Capacity, 16-28 AWG https://www.pololu.com/product/1928
Crimp Connector Housings https://www.pololu.com/category/70/crimp-connector-housings
Female Crimp Pins for 0.1" Housings https://www.pololu.com/product/1930
Male Crimp Pins for 0.1" Housings https://www.pololu.com/product/1931
Wires with Pre-Crimped Terminals https://www.pololu.com/category/71/wires-with-pre-crimped-terminals
Premium Jumper Wires https://www.pololu.com/category/65/premium-jumper-wires
https://www.futurlec.com/ConnHead.shtml
Metallic Waterproof 3x4 Keypad https://www.futurlec.com/Keypads.shtml
e.g
https://www.dfrobot.com/product-892.html
https://wiki.dfrobot.com/NFC_Module_for_Arduino__SKU_DFR0231_
YubiKey 5 NFC
https://www.yubico.com/product/yubikey-5-nfc
H0307 • 145Lx105Wx65Dmm IP65 Sealed ABS Enclosure
https://www.altronics.com.au/p/h0307-ritec-145lx105wx65dmm-ip65-sealed-abs-enclosure/
H0151 • UB1 (157Lx95Wx53Hmm) Grey ABS Jiffy Box
https://www.altronics.com.au/p/h0151-ub1-157lx95wx53hmm-grey-abs-jiffy-box/
P0628 • 2.1mm Female Plastic Chassis Mount DC Power Socket (not necessary)
https://www.altronics.com.au/p/p0628-2.1mm-female-plastic-chassis-mount-dc-power-socket/
H1554 • 5mm LED Mounts Pk 100
https://www.altronics.com.au/p/h1554-5mm-led-mounts-pk-100/
S6109 • 1.5-24V Piezo Chassis Mount Buzzer (status buzzer)
https://www.altronics.com.au/p/s6109-1.5-24v-piezo-chassis-mount-buzzer/
S6100 • 3-15V Mechanical Chassis Mount Buzzer (door buzzer)
https://www.altronics.com.au/p/s6100-3-15v-mechanical-chassis-mount-buzzer/