Cynthia is a Talon mag fed bolt action blaster, customizable for any need.

Cynthia is a bolt action blaster using the same basic layout as the Indra by CaptainSlug. Cynthia began with me figuring out how to fix all the issues with the Indra, but I pretty quickly realized it would be easier to design a whole new blaster from the ground up, rather than fix the Indra part by part. Cynthia contains no original Indra parts.

Firing Demo: https://youtube.com/clip/UgkxEHjsmXU370IFB8PHDxiK1v4qDb7vdCwZ

Blaster Overview: https://youtu.be/mIW0dAyOCv0

Customization Overview: https://www.youtube.com/watch?v=mZe6dWdQUs0

Assembly Video: https://youtu.be/j310YjRcwpU

Videos:

• Coop772: https://youtu.be/EAlBAFHLBZ4?si=m3mHurtMuX4kwWqg
• Captain Xavier: https://youtu.be/w24jp0K5Wfk?si=fWUyEQeJ973HoaAR
• Boomstick Mods: https://youtu.be/WF5V2YcIIjc?si=WsV3GZjRpdS0lTr-
• ZDL (China Spec): https://youtu.be/mkXsqYBOBpE?si=tJq3lU1MIqGpPgKb
• WalcomS7: https://www.youtube.com/watch?v=UhGpRX_KlXE
• BansheeIndian: https://www.youtube.com/watch?v=CzInCRDko88

If you enjoy the stuff I make, please consider donating via Patreon or BuyMeACoffee. Filament and prototyping stuff costs a lot! By donating, I can make more cool stuff for everyone to enjoy. Thanks!

https://www.patreon.com/sillybutts Monthly donations

https://www.buymeacoffee.com/sillybutts One-time donations

The Indra by CaptainSlug is infamous for it's many issues. Thankfully, Cynthia fixes almost all the issues the Indra had:

• Fixed catch reliability by using the plunger system from the SLAB (modified to be longer)
• Improved plunger tube attachment strength (glue and more attachment area)
• Improved ramrod retention
• Made Cynthia slimmer
• Lengthened the stock to be Caliburn V4 length.
• Massively improved trigger feel
• Made the blaster lighter
• Less hardware cost
• Vastly improved front half rigidity
• A lot easier to assemble, disassemble, and swap springs.
• The thumbhole stock is easily removable, and is not required (on the Indra, the stock rod is required for blaster rigidity)
• Probably more stuff that I can't remember

There are many variant parts for Cynthia:

• Left and right handed parts
• Front Ends
• • Cynthia text or no Cynthia text
• • Ported and unported
• • Side rail or no side rail
• • Slim front end
• • Stubby short front end
• Two grip styles
• Several trigger styles
• Thumbhole stock or no thumbhole stock
• Fully enclosed plunger tube travel space, or open plunger tube space
• • Fully enclosed is good for people with beards, to protect yourself from hair-rippage during priming
• Tons of bolt handle options and lengths
• Locking bolt handle (for "realistic" bolt action coolness) or freely-moving bolt handle
• • Optional ball detent makes the bolt handle clicky as well, which feels really good.
• Optional muzzle with extra bottom picatinny (for bipod mounting)
• Optional picatinny rail replacements with no picatinny, for aesthetic sleekness
• Optional front grip
• Magwell panels with or without elastic holes, respectively for use with elastic or a spring on the mag release
• etc

Here are some good Picatinny sights if you want some:

• https://www.thingiverse.com/thing:2376150/files FrontPip and Pip in the Caliburn fileset are great iron sights.
• https://www.thingiverse.com/thing:1667830
• https://www.thingiverse.com/thing:2829229
• https://www.thingiverse.com/thing:5103083

As testing is done, I will update this part of the page with common spring/barrel combos for specific FPS numbers.

Keep in mind that SCARs usually reduce performance a bit.

Cynthia performance can be roughly approximated by using Talon Claw T4 performance estimates (in regards to barrel length and spring choice).

A full list of non-US sellers can be found here: https://www.stuffbysilly.com/wheretobuy

Hardware is available from these sellers:

• OutOfDarts: https://outofdarts.com/products/cynthia-hardware-kit
• SilverFoxIndustries: https://silverfoxindustries.shop/collections/new-products/products/cynthia-hardware-kit

Fully printed/assembled blasters are available from these sellers:

• OutOfDarts: https://outofdarts.com/products/cynthia-3d-parts-hardware-kit
• SilverFoxIndustries: WIP

Cynthia uses less than one 1kg PLA spool (if you were to print it all one color).

Infills:

• Black:

• • PlungerRod, PlungerCap, 100% Gyroid, 5+ walls.
• • ThumbholeStock needs a brim.
• • Everything else, 20% Gyroid, 5 walls.

• Orange:

• • BoltBase, BoltHandle, FrontGripKeeper, Catch, CatchPusher, PlungerHead, 100% infill, 5 walls.
• • BoltHandle, FrontGripKeeper, CatchPusher need brims.
• • Everything else, 20% Gyroid, 5 walls.

• Green:

• • MagwellBack, Magwell_L, Magwell_R, Grip_L, Grip_R, 100% infill, 5 walls.
• • All the tall green parts benefit from a brim.
• • To be safe, I recommend you print each tall part one at a time.
• • Everything else, 20% Gyroid, 5 walls.

Some parts have tight tolerances (mainly the dovetails in the catch area on the top cover print). Sanding and/or filing is recommended to make the dovetails go together smoothly. The top cover part can be broken if you try and force the dovetails together.

Full hardware list: https://docs.google.com/spreadsheets/d/1t6-6BqBstn1Ad-zIxsB0FqWth3nB00lHC9SVksAbSmY/edit?usp=sharing

H4 bar spec for those interested:

H4 bars can be cut down from C4 bars using the bar cutting tool (included in Cynthia files).

Video: https://youtu.be/j310YjRcwpU

Catch assembly: https://youtu.be/D5Ouzac-vMs

Plunger Tube Gluing Guide: https://www.youtube.com/watch?v=0BNuwjhlNqI (Super glue works, epoxy is best)

If you build any of my designs, I'd love to see yours! Feel free to message me on Discord (Sillybutts#5905) or tag me on a post on Reddit (u/SillyTheGamer).

If you are having issues with any of my designs, let me know on Discord (Sillybutts#5905) or Reddit (u/SillyTheGamer).

If you wish to print and sell this item, please contact me for licensing. I can be reached on Discord (Sillybutts#5905) or Reddit (u/SillyTheGamer). [email protected] email too. 你好！ 我擁有這個設計。 想生產請聯繫我. 你好！ 我拥有这个设计。 如果你想生产，请联系我.

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Disclaimer: This is not a toy. This blaster is meant for hobbyists, not children. Blaster must be operated correctly to avoid injury. I am not responsible for any injuries from this blaster. Please use a bright/blaze orange muzzle and barrel cap on this blaster. Consult local laws before building this high powered blaster.

I don't charge for my files, so any donations or merch purchases would be greatly appreciated!

https://www.redbubble.com/people/Sillybutts/shop RedBubble full of fun Nerf-y sticker and merch designs!

https://www.patreon.com/sillybutts Monthly donations

https://www.buymeacoffee.com/sillybutts One-time donations