Update ReadMe

2_Firmware/1_I2C_Scanning/ReadMe.md

@@ -1,14 +1,6 @@
 # I2C Scanning
 
-The card is equipped with two low-power LEDs.
-
-The blue LED functions as a user LED and serves solely as an indicator; for example, it can be illuminated when the card is performing calculations.
-
-The white LED is connected to a branch of the GNSS module, specifically the TIMEPULSE pin. This pin is in a high state when the GNSS module receives satellite signals, thus turning on the LED. However, it can also be controlled by the microcontroller.
-
-Therefore, with this pair of LEDs, it is possible to provide the user with different indications based on the illuminated state of the LEDs.
-
-## Hardware Integration
+This program is designed to detect the sensors on the board, each of which is assigned a unique address, as illustrated in the table below. In the case of the LSM303AGR, which incorporates both an accelerometer and a magnetometer, there are four addresses allocated for the three sensors. Notably, there is a distinct address assigned for each of these two components.
 
 | I2C Address | Description |
 | ----------- | -------------- |