Neural-LAM is a repository of graph-based neural weather prediction models for Limited Area Modeling (LAM). The code uses PyTorch and PyTorch Lightning. Graph Neural Networks are implemented using PyG and logging is set up through Weights & Biases.
The repository contains LAM versions of:
- The graph-based model from Keisler (2022).
- GraphCast, by Lam et al. (2023).
- The hierarchical model from Oskarsson et al. (2023).
For more information see our paper: Graph-based Neural Weather Prediction for Limited Area Modeling. If you use Neural-LAM in your work, please cite:
@inproceedings{oskarsson2023graphbased,
title={Graph-based Neural Weather Prediction for Limited Area Modeling},
author={Oskarsson, Joel and Landelius, Tomas and Lindsten, Fredrik},
booktitle={NeurIPS 2023 Workshop on Tackling Climate Change with Machine Learning},
year={2023}
}
We plan to continue updating this repository as we improve existing models and develop new ones. Collaborations around this implementation are very welcome. If you are working with Neural-LAM feel free to get in touch and/or submit pull requests to the repository.
The Neural-LAM code is designed to modularize the different components involved in training and evaluating neural weather prediction models. Models, graphs and data are stored separately and it should be possible to swap out individual components. Still, some restrictions are inevitable:
- The graph used has to be compatible with what the model expects. E.g. a hierarchical model requires a hierarchical graph.
- The graph and data are specific to the limited area under consideration. This is of course true for the data, but also the graph should be created with the exact geometry of the area in mind.
Currently we are using these models on a limited area covering the Nordic region, the so called MEPS area (see paper).
There are still some parts of the code that is quite specific for the MEPS area use case.
This is in particular true for the mesh graph creation (create_mesh.py
) and some of the constants used (neural_lam/constants.py
).
If there is interest to use Neural-LAM for other areas it is not a substantial undertaking to refactor the code to be fully area-agnostic.
We would be happy to support such enhancements.
See the issues mllam#2, mllam#3 and mllam#4 for some initial ideas on how this could be done.
Below follows instructions on how to use Neural-LAM to train and evaluate models.
Follow the steps below to create the neccesary python environment.
- Install GEOS for your system. For example with
sudo apt-get install libgeos-dev
. This is neccesary for the Cartopy requirement. - Use python 3.9.
- Install version 2.0.1 of PyTorch. Follow instructions on the PyTorch webpage for how to set this up with GPU support on your system.
- Install required packages specified in
requirements.txt
. - Install PyTorch Geometric version 2.2.0. This can be done by running
TORCH="2.0.1"
CUDA="cu117"
pip install pyg-lib==0.2.0 torch-scatter==2.1.1 torch-sparse==0.6.17 torch-cluster==1.6.1\
torch-geometric==2.3.1 -f https://pytorch-geometric.com/whl/torch-${TORCH}+${CUDA}.html
You will have to adjust the CUDA
variable to match the CUDA version on your system or to run on CPU. See the installation webpage for more information.
Datasets should be stored in a directory called data
.
See the repository format section for details on the directory structure.
The full MEPS dataset can be shared with other researchers on request, contact us for this.
A tiny subset of the data (named meps_example
) is available in example_data.zip
, which can be downloaded from here.
Download the file and unzip in the neural-lam directory.
All graphs used in the paper are also available for download at the same link (but can as easily be re-generated using create_mesh.py
).
Note that this is far too little data to train any useful models, but all scripts can be ran with it.
It should thus be useful to make sure that your python environment is set up correctly and that all the code can be ran without any issues.
An overview of how the different scripts and files depend on each other is given in this figure:
In order to start training models at least three pre-processing scripts have to be ran:create_mesh.py
create_grid_features.py
create_parameter_weights.py
Run create_mesh.py
with suitable options to generate the graph you want to use (see python create_mesh.py --help
for a list of options).
The graphs used for the different models in the paper can be created as:
- GC-LAM:
python create_mesh.py --graph multiscale
- Hi-LAM:
python create_mesh.py --graph hierarchical --hierarchical 1
(also works for Hi-LAM-Parallel) - L1-LAM:
python create_mesh.py --graph 1level --levels 1
The graph-related files are stored in a directory called graphs
.
To create the remaining static files run the scripts create_grid_features.py
and create_parameter_weights.py
.
The main option to set for these is just which dataset to use.
The project is fully integrated with Weights & Biases (W&B) for logging and visualization, but can just as easily be used without it.
When W&B is used, training configuration, training/test statistics and plots are sent to the W&B servers and made available in an interactive web interface.
If W&B is turned off, logging instead saves everything locally to a directory like wandb/dryrun...
.
The W&B project name is set to neural-lam
, but this can be changed in neural_lam/constants.py
.
See the W&B documentation for details.
If you would like to login and use W&B, run:
wandb login
If you would like to turn off W&B and just log things locally, run:
wandb off
Models can be trained using train_model.py
.
Run python train_model.py --help
for a full list of training options.
A few of the key ones are outlined below:
--dataset
: Which data to train on--model
: Which model to train--graph
: Which graph to use with the model--processor_layers
: Number of GNN layers to use in the processing part of the model--ar_steps
: Number of time steps to unroll for when making predictions and computing the loss
Checkpoints of trained models are stored in the saved_models
directory.
The implemented models are:
This is the basic graph-based LAM model. The encode-process-decode framework is used with a mesh graph in order to make one-step pedictions. This model class is used both for the L1-LAM and GC-LAM models from the paper, only with different graphs.
To train 1L-LAM use
python train_model.py --model graph_lam --graph 1level ...
To train GC-LAM use
python train_model.py --model graph_lam --graph multiscale ...
A version of Graph-LAM that uses a hierarchical mesh graph and performs sequential message passing through the hierarchy during processing.
To train Hi-LAM use
python train_model.py --model hi_lam --graph hierarchical ...
A version of Hi-LAM where all message passing in the hierarchical mesh (up, down, inter-level) is ran in paralell. Not included in the paper as initial experiments showed worse results than Hi-LAM, but could be interesting to try in more settings.
To train Hi-LAM-Parallel use
python train_model.py --model hi_lam_parallel --graph hierarchical ...
Checkpoint files for our models trained on the MEPS data are available upon request.
Evaluation is also done using train_model.py
, but using the --eval
option.
Use --eval val
to evaluate the model on the validation set and --eval test
to evaluate on test data.
Most of the training options are also relevant for evaluation (not ar_steps
, evaluation always unrolls full forecasts).
Some options specifically important for evaluation are:
--load
: Path to model checkpoint file (.ckpt
) to load parameters from--n_example_pred
: Number of example predictions to plot during evaluation.
Note: While it is technically possible to use multiple GPUs for running evaluation, this is strongly discouraged. If using multiple devices the DistributedSampler
will replicate some samples to make sure all devices have the same batch size, meaning that evaluation metrics will be unreliable. This issue stems from PyTorch Lightning. See for example this draft PR for more discussion and ongoing work to remedy this.
Except for training and pre-processing scripts all the source code can be found in the neural_lam
directory.
Model classes, including abstract base classes, are located in neural_lam/models
.
It is possible to store multiple datasets in the data
directory.
Each dataset contains a set of files with static features and a set of samples.
The samples are split into different sub-directories for training, validation and testing.
The directory structure is shown with examples below.
Script names within parenthesis denote the script used to generate the file.
data
├── dataset1
│ ├── samples - Directory with data samples
│ │ ├── train - Training data
│ │ │ ├── nwp_2022040100_mbr000.npy - A time series sample
│ │ │ ├── nwp_2022040100_mbr001.npy
│ │ │ ├── ...
│ │ │ ├── nwp_2022043012_mbr001.npy
│ │ │ ├── nwp_toa_downwelling_shortwave_flux_2022040100.npy - Solar flux forcing
│ │ │ ├── nwp_toa_downwelling_shortwave_flux_2022040112.npy
│ │ │ ├── ...
│ │ │ ├── nwp_toa_downwelling_shortwave_flux_2022043012.npy
│ │ │ ├── wtr_2022040100.npy - Open water features for one sample
│ │ │ ├── wtr_2022040112.npy
│ │ │ ├── ...
│ │ │ └── wtr_202204012.npy
│ │ ├── val - Validation data
│ │ └── test - Test data
│ └── static - Directory with graph information and static features
│ ├── nwp_xy.npy - Coordinates of grid nodes (part of dataset)
│ ├── surface_geopotential.npy - Geopotential at surface of grid nodes (part of dataset)
│ ├── border_mask.npy - Mask with True for grid nodes that are part of border (part of dataset)
│ ├── grid_features.pt - Static features of grid nodes (create_grid_features.py)
│ ├── parameter_mean.pt - Means of state parameters (create_parameter_weights.py)
│ ├── parameter_std.pt - Std.-dev. of state parameters (create_parameter_weights.py)
│ ├── diff_mean.pt - Means of one-step differences (create_parameter_weights.py)
│ ├── diff_std.pt - Std.-dev. of one-step differences (create_parameter_weights.py)
│ ├── flux_stats.pt - Mean and std.-dev. of solar flux forcing (create_parameter_weights.py)
│ └── parameter_weights.npy - Loss weights for different state parameters (create_parameter_weights.py)
├── dataset2
├── ...
└── datasetN
The graphs
directory contains generated graph structures that can be used by different graph-based models.
The structure is shown with examples below:
graphs
├── graph1 - Directory with a graph definition
│ ├── m2m_edge_index.pt - Edges in mesh graph (create_mesh.py)
│ ├── g2m_edge_index.pt - Edges from grid to mesh (create_mesh.py)
│ ├── m2g_edge_index.pt - Edges from mesh to grid (create_mesh.py)
│ ├── m2m_features.pt - Static features of mesh edges (create_mesh.py)
│ ├── g2m_features.pt - Static features of grid to mesh edges (create_mesh.py)
│ ├── m2g_features.pt - Static features of mesh to grid edges (create_mesh.py)
│ └── mesh_features.pt - Static features of mesh nodes (create_mesh.py)
├── graph2
├── ...
└── graphN
To keep track of levels in the mesh graph, a list format is used for the files with mesh graph information. In particular, the files
│ ├── m2m_edge_index.pt - Edges in mesh graph (create_mesh.py)
│ ├── m2m_features.pt - Static features of mesh edges (create_mesh.py)
│ ├── mesh_features.pt - Static features of mesh nodes (create_mesh.py)
all contain lists of length L
, for a hierarchical mesh graph with L
layers.
For non-hierarchical graphs L == 1
and these are all just singly-entry lists.
Each entry in the list contains the corresponding edge set or features of that level.
Note that the first level (index 0 in these lists) corresponds to the lowest level in the hierarchy.
In addition, hierarchical mesh graphs (L > 1
) feature a few additional files with static data:
├── graph1
│ ├── ...
│ ├── mesh_down_edge_index.pt - Downward edges in mesh graph (create_mesh.py)
│ ├── mesh_up_edge_index.pt - Upward edges in mesh graph (create_mesh.py)
│ ├── mesh_down_features.pt - Static features of downward mesh edges (create_mesh.py)
│ ├── mesh_up_features.pt - Static features of upward mesh edges (create_mesh.py)
│ ├── ...
These files have the same list format as the ones above, but each list has length L-1
(as these edges describe connections between levels).
Entries 0 in these lists describe edges between the lowest levels 1 and 2.
If you are interested in machine learning models for LAM, have questions about our implementation or ideas for extending it, feel free to get in touch. You can open a github issue on this page, or (if more suitable) send an email to [email protected].