Openmv 固件放在外部8MB QSPI Flash,所以需要下载0x08000000.hex,初始化QSPI外设,将QSPI Flash映射到0x90000000。
0x08000000.hex -> 0x08000000
0x90000000.bin -> 0x90000000
0x90000000.bin 固件需要使用STM32CubeProg软件,勾选使能QSPI Flash下载算法,使用ST-Link进行下载
Bin文件需要自己定义下载地址,请注意,STM32CubeProg
Download
按钮右边有向下的小箭头
,点击可以自定义下载地址
The Openmv firmware is placed on the external 8MB QSPI Flash, so download 0x080000000.hex, initialize the QSPI peripheral, and map QSPI Flash to 0x90000000.
0x08000000.hex -> 0x08000000
0x90000000.bin -> 0x90000000
0x90000000.bin firmware needs to use STM32CubeProg software, check enable QSPI Flash download algorithm, use ST-Link to download
Bin file need to define the Download address, please note that STM32CubeProg
Download
button on the right side of the downarrow
, click to customize the Download address