NOT TESTED

(Any Tool Any Pot REVISION CHANGES)
(6/22/2022 v1.09)
(v1.09 Add Automatic unit selecting)
(v1.09 Works with Metric and inch machines)
(v1.09 Fixed Tool Breakage From alarm "1" to "2")
(v1.09 Fixed R Two Touch setter programs)
(v1.09 Created Programs for one touch setter for R-series)
(v1.09 One touch programs for R-series moved to R One Touch Setter Folder)
(v1.09 Fixed all tool calibration programs)
(v1.09 Fixed Tool call 115 to 116 tool call)
(v1.09 Added Probe ON Tool Breakage in 8000 Tool Breakage Folder)
(V1.09 Side Pallet probe programs)
(6/1/2022 v1.08)
(v1.08 Add Wear offset clear after Tool touch)
(v1.08 Add Tool Breakage Program for custom G/M codes)
(v1.08 Check out video at this link for setup custom G/M codes)
(v1.08 https://youtu.be/31G9IWMBWMo)
(v1.08 Tool Breakage for G/M codes is in Folder 8000 Tool Breakage)
(v1.08 Added more variable Clearing)
(v1.08 Added Program 0101 for tool touch on R650x2 40 Tool Machine in folder R Two Touch Setter)
(v1.08 precall tool then run program 0101)
(5/26/2022 v1.07)
(Add ReadME.txt with EULA)
(5/24/2022 v1.07)
(v1.07 Created folders for single,two and OTS Programs)
(v1.07 Blum/Metrol Programs moved into Single Touch Setter Folder)
(v1.07 Created Programs for two touch setter for R-series)
(v1.07 Two touch programs for R-series moved to R Two Touch Setter Folder)
(v1.07 Created Programs for OTS/TS27R to work with Any Tool, Any Pot)
(v1.07 OTS/TS27R moved to OTS Folder)
(1/27/2022 v1.06)
(v1.06 Change Codes For Tool Call)
(12/17/2021 v1.05)
(v1.05 Added REVISION change File O8005)
(v1.05 Probe M-Code off/on)
(v1.05 Probe M-Code )
(v1.05 High Accuray off/on)
(v1.05 High Accuray Level)
(v1.05 Tool Breakage Changed From 5000 to 8000)
(v1.05 Fix Tool Breakage)
(v1.05 Fixed Math Error In Insert Touch)
(12/15/2021 v1.04 Release)

(6/1/2022 v1.08)
(v1.08 Add Wear offset clear after Tool touch)
(v1.08 Add Tool Breakage Program for custom G/M codes)
(v1.08 Check out video at this link for setup custom G/M codes)
(v1.08 https://youtu.be/31G9IWMBWMo)
(v1.08 Tool Breakage for G/M codes is in Folder 8000 Tool Breakage)
(v1.08 Added more variable Clearing)
(v1.08 Added Program 0101 for tool touch on R650x2 40 Tool Machine in folder R Two Touch Setter)
(v1.08 precall tool then run program 0101)
(5/26/2022 v1.07)
(Add ReadME.txt with EULA)
(5/24/2022 v1.07)
(v1.07 Created folders for single,two and OTS Programs)
(v1.07 Blum/Metrol Programs moved into Single Touch Setter Folder)
(v1.07 Created Programs for two touch setter for R-series)
(v1.07 Two touch programs for R-series moved to R Two Touch Setter Folder)
(v1.07 Created Programs for OTS/TS27R to work with Any Tool, Any Pot)
(v1.07 OTS/TS27R moved to OTS Folder)
(1/27/2022 v1.06)
(v1.06 Change Codes For Tool Call)
(12/17/2021 v1.05)
(v1.05 Added REVISION change File O8005)
(v1.05 Probe M-Code off/on)
(v1.05 Probe M-Code )
(v1.05 High Accuray off/on)
(v1.05 High Accuray Level)
(v1.05 Tool Breakage Changed From 5000 to 8000)
(v1.05 Fix Tool Breakage)
(v1.05 Fixed Math Error In Insert Touch)
(12/15/2021 v1.04 Release)

(5/26/2022 v1.07)
(Add ReadME.txt with EULA)
(5/24/2022 v1.07)
(v1.07 Created folders for single,two and OTS Programs)
(v1.07 Blum/Metrol Programs moved into Single Touch Setter Folder)
(v1.07 Created Programs for two touch setter for R-series)
(v1.07 Two touch programs for R-series moved to R Two Touch Setter Folder)
(v1.07 Created Programs for OTS/TS27R to work with Any Tool, Any Pot)
(v1.07 OTS/TS27R moved to OTS Folder)
(1/27/2022 v1.06)
(v1.06 Change Codes For Tool Call)
(12/17/2021 v1.05)
(v1.05 Added REVISION change File O8005)
(v1.05 Probe M-Code off/on)
(v1.05 Probe M-Code )
(v1.05 High Accuray off/on)
(v1.05 High Accuray Level)
(v1.05 Tool Breakage Changed From 5000 to 8000)
(v1.05 Fix Tool Breakage)
(v1.05 Fixed Math Error In Insert Touch)
(12/15/2021 v1.04 Release)