A toolchanger for Sovol SV08.
- Uses the Nozzle, planetary Extruder and Extruder Bord from the original Sovol SV08 Printhead.
- Off the shelf voron parts, except for bearings.
- Uses Dragon Burner toolhead - can fit 6 hotends in 350 frame. Stealthburner and MiniStealthburner are an option but limited support. (Experimental version of the Rapid Burner is in the works by @Marshalldog) (Experimental version for the Xol-Toolhead is in the works)
- Uses OptoTap probe sensor for nozzle Z probing.
- Same rigidity and probe accuracy as Tap.
- Same external printer dimensions, except for top hat.
- No servos, no wires on the shuttle, recommended to use with a Canbus toolhead board for less wires, but anything goes.
Dont't have a BOM at the time.
see CAD file and print with FDM Printer:
- black extruder part (Nylon 12 CF, ABS, ...)
- green part (PLA, PETG, ...)
- orange part (Nylon 12 CF, ABS, ...)
- red and blue part (Nylon 12 CF, ABS, ...)
to print with SLA or you can test with FDM:
- Gearhousing at the extruder black part
See Tapchanger from viesturz for the Voron 2.4 youtube channel.
- Dragon Burner from chirpy2605.
- Tapchanger from viesturz.
- is not tested at the time
- need help with CAN-BUS and the Sovol Extruder bord