LibreCAD is a 2D CAD drawing tool based on the community edition of QCAD (www.qcad.org). LibreCAD has been re-structured and ported to qt4 and works natively cross platform between OSX, Windows and Linux. See https://www.librecad.org

Unzip or checkout a version of LibreCAD into a directory. CD into that directory and follow these instructions:

Build makefile and compile LibreCAD

qmake librecad.pro
make

Make sure you have the qt-4 SDK installed Install the qt4 SDK by executing the following commands:

$ sudo apt-get install g++ gcc make git-core libqt4-dev qt4-qmake \
libqt4-help qt4-dev-tools libboost-all-dev libmuparser-dev

Alternatively, you make sure you have deb-src lines enabled in your sources.list file, and run,

$ sudo apt-get build-dep librecad

For SVN see also: https://www.librecad.org/2010/10/debian-64-bit-and-ubuntu-compile-how-to/

For git see also: https://librecad.org/cms/home/from-source/linux.html

NOTE 1: On systems like fedora (& Ubuntu??) You might need to run qmake-qt4 instead of just qmake

• Download a copy of Qt SDK < 5.0.0, 4.8.4 for example from https://qt-project.org/downloads

• Download boost 1.48 from https://sourceforge.net/projects/boost/files/boost/1.48.0/

• unzip into C:\boost\1_48_0 (in this directory you will find boost root directory, INSTALL, index, Jamroot etc.. etc).

• Download muParser 2.2.2 from https://sourceforge.net/projects/muparser/files/muparser/Version\ 2.2.2/muparser_v2_2_2.zip

• Create a directory named "muparser" in C:\

• Unzip muparser_v2_2_2.zip into C:\muparser\

Notes: At this point you will have the following directory structure: C:\muparser\muparser_v2_2_2. If you prefer to keep muParser in other locations, you should specify the directiory location with a custom.pro file in LibreCAD source folder, for example, the following setting is equivalent to the default muparser path in common.pro: MUPARSER_DIR = /muparser/muparser_v2_2_2

• Start Qt Desktop using "Qt 4.8.4 for Desktop (MinGW)" shortcut.
• In Qt Desktop console, navigate to muParser build directory (C:\muparser\muparser_v2_2_2\build), then type the following command to built muParser library: mingw32-make -fmakefile.mingw

After installation, start Qt Creator and load LibreCAD.pro, from the build menu select "Build All".

install macports from https://www.macports.org/

After that install QT and a new gcc, at mimimum you properly need gcc 44

Install a version of Qt < 4.8.0, 4.7.4 for example sudo port install gcc46 qt4-creator-mac qt4-mac boost

When installed run to build a makefile qmake librecad.pro -r -spec mkspec/macports