v1.14.4

• Saving and Loading FORM now works!
• • FORM eats up 10k bytes of storage, still room to save other things, might be iffy with old sequencer enabled. Having multiple banks of patterns unlikely until new hardware.
• MidiFX get stopped when stopping the FORM
• AUX + Arp On shortcut will now turn all arps off or back on. If in QuickEdit or Arp ParamView this shortcut only applies to currently selected arp.
• Mute/unmute tracks/machines by double clicking them(top row keys 3 - 10)
• Track/machine LEDs now light up indigo whenever notes were played on a step
• Fixed some bugs causing crashes.

v1.14.3

• Makes double clicking a step enter the note editor

v1.14.2

• Fixes bug with stepHeld sometimes initially being on causing the menu to be stuck editing one param
• Adds MidiFX to form. Use AUX shortcuts to set the track MidiFX, steps can also be set to a specific MidiFX through the menu.
• Fixes step muting not working
• Fixes arp chance page not being editable

Early preview of a new sequencer mode called FORM. This is WIP, missing features, will probably have bugs and is not saved

S1/S2 modes are disabled in this build to save on space.

FORM is a host for sequencers called machines. There is currently one machine available called OMNI.

OMNI is a polyphonic step sequencer.

Features:

• Sequence up to 64 bars
• Various play modes like forward, reverse, pong, random, and shuffle.
• Conditional step trigs.
• Variable rates
• Triplets
• 16th note and 8th note shuffle
• Each step can perform a function to either restart the sequence, change the direction of the playhead or jump to a specific step.
• Steps can be nudged forwards or backwards in time.
• There is an additional transpose pattern which can be applied in two ways: global to the track, and or accumulative to each step.
• The tranpose values can be set to global interval(Interval of current scale and root), semitones, or local interval(interval of current scale but the root is determined by the notes in the scale)

Quick Usage Guide:
AUX + F1 to play, hold F1 to stop
AUX + F2 to reset
AUX + F3 to reverse directions

Use pot 5 to change the UI mode, modes working are Config, Transpose, and Note Editor
Quick Click a step to mute/unmute
Hold a step key to both select it and edit the selected param
While holding a step use the top row of keys to set the step function or bottom row to set that step to jump to another step.

F1 to Copy then paste
F2 to Cut then paste
F1 + F3 to change the length or the track(Lower row) or the rate(top row)

Pot 1 to change the page
Pot 2 to change the zoom level

F1 and then AUX to enter note editor without pot 5, press AUX to exit. You can also enter the note editor using pot 5

Note numbers can be entered via the note editor or in the menu.

Missing Features:

• There is only one sequencer type: OMNI

v1.14.3

• Makes double clicking a step enter the note editor

v1.14.2

• Fixes bug with stepHeld sometimes initially being on causing the menu to be stuck editing one param
• Adds MidiFX to form. Use AUX shortcuts to set the track MidiFX, steps can also be set to a specific MidiFX through the menu.
• Fixes step muting not working
• Fixes arp chance page not being editable

Early preview of a new sequencer mode called FORM. This is WIP, missing features, will probably have bugs and is not saved

S1/S2 modes are disabled in this build to save on space.

FORM is a host for sequencers called machines. There is currently one machine available called OMNI.

OMNI is a polyphonic step sequencer.

Features:

• Sequence up to 64 bars
• Various play modes like forward, reverse, pong, random, and shuffle.
• Conditional step trigs.
• Variable rates
• Triplets
• 16th note and 8th note shuffle
• Each step can perform a function to either restart the sequence, change the direction of the playhead or jump to a specific step.
• Steps can be nudged forwards or backwards in time.
• There is an additional transpose pattern which can be applied in two ways: global to the track, and or accumulative to each step.
• The tranpose values can be set to global interval(Interval of current scale and root), semitones, or local interval(interval of current scale but the root is determined by the notes in the scale)

Quick Usage Guide:
AUX + F1 to play, hold F1 to stop
AUX + F2 to reset
AUX + F3 to reverse directions

Use pot 5 to change the UI mode, modes working are Config, Transpose, and Note Editor
Quick Click a step to mute/unmute
Hold a step key to both select it and edit the selected param
While holding a step use the top row of keys to set the step function or bottom row to set that step to jump to another step.

F1 to Copy then paste
F2 to Cut then paste
F1 + F3 to change the length or the track(Lower row) or the rate(top row)

Pot 1 to change the page
Pot 2 to change the zoom level

F1 and then AUX to enter note editor without pot 5, press AUX to exit. You can also enter the note editor using pot 5

Note numbers can be entered via the note editor or in the menu.

Missing Features:

• Muting and soloing machines don't work yet.
• There is only one sequencer type: OMNI
• Saving and loading is not implemented

v1.14.2

• Fixes bug with stepHeld sometimes initially being on causing the menu to be stuck editing one param
• Adds MidiFX to form. Use AUX shortcuts to set the track MidiFX, steps can also be set to a specific MidiFX through the menu.
• Fixes step muting not working
• Fixes arp chance page not being editable

Early preview of a new sequencer mode called FORM. This is WIP, missing features, will probably have bugs and is not saved

S1/S2 modes are disabled in this build to save on space.

FORM is a host for sequencers called machines. There is currently one machine available called OMNI.

OMNI is a polyphonic step sequencer.

Features:

• Sequence up to 64 bars
• Various play modes like forward, reverse, pong, random, and shuffle.
• Conditional step trigs.
• Variable rates
• Triplets
• 16th note and 8th note shuffle
• Each step can perform a function to either restart the sequence, change the direction of the playhead or jump to a specific step.
• Steps can be nudged forwards or backwards in time.
• There is an additional transpose pattern which can be applied in two ways: global to the track, and or accumulative to each step.
• The tranpose values can be set to global interval(Interval of current scale and root), semitones, or local interval(interval of current scale but the root is determined by the notes in the scale)

Quick Usage Guide:
AUX + F1 to play, hold F1 to stop
AUX + F2 to reset
AUX + F3 to reverse directions

Use pot 5 to change the UI mode, modes working are Config, Transpose, and Note Editor
Quick Click a step to mute/unmute
Hold a step key to both select it and edit the selected param
While holding a step use the top row of keys to set the step function or bottom row to set that step to jump to another step.

F1 to Copy then paste
F2 to Cut then paste
F1 + F3 to change the length or the track(Lower row) or the rate(top row)

Pot 1 to change the page
Pot 2 to change the zoom level

F1 and then AUX to enter note editor without pot 5, press AUX to exit. You can also enter the note editor using pot 5

Note numbers can be entered via the note editor or in the menu.

Missing Features:

• Muting and soloing machines don't work yet.
• There is only one sequencer type: OMNI
• Saving and loading is not implemented

Early preview of a new sequencer mode called FORM. This is WIP, missing features, will probably have bugs and is not saved

S1/S2 modes are disabled in this build to save on space.

FORM is a host for sequencers called machines. There is currently one machine available called OMNI.

OMNI is a polyphonic step sequencer.

Features:

• Sequence up to 64 bars
• Various play modes like forward, reverse, pong, random, and shuffle.
• Conditional step trigs.
• Variable rates
• Triplets
• 16th note and 8th note shuffle
• Each step can perform a function to either restart the sequence, change the direction of the playhead or jump to a specific step.
• Steps can be nudged forwards or backwards in time.
• There is an additional transpose pattern which can be applied in two ways: global to the track, and or accumulative to each step.
• The tranpose values can be set to global interval(Interval of current scale and root), semitones, or local interval(interval of current scale but the root is determined by the notes in the scale)

Quick Usage Guide:
AUX + F1 to play, hold F1 to stop
AUX + F2 to reset
AUX + F3 to reverse directions

Use pot 5 to change the UI mode, modes working are Config, Transpose, and Note Editor
Quick Click a step to mute/unmute
Hold a step key to both select it and edit the selected param
While holding a step use the top row of keys to set the step function or bottom row to set that step to jump to another step.

F1 to Copy then paste
F2 to Cut then paste
F1 + F3 to change the length or the track(Lower row) or the rate(top row)

Pot 1 to change the page
Pot 2 to change the zoom level

F1 and then AUX to enter note editor without pot 5, press AUX to exit. You can also enter the note editor using pot 5

Note numbers can be entered via the note editor or in the menu.

Missing Features:

• MidiFx don't work yet
• Muting and soloing machines don't work yet.
• There is only one sequencer type: OMNI
• Saving and loading is not implemented

This build fixes CV Gates being set to off if playing legato.

You can now change CV mode between legato and retrig.

Legato turns gate on when first note is sent and only sets the gate to off once there are no more note being held.

Retrig will send a gate off then a gate on 10ms later when there are notes being held.

Also adds the display of the current version to the last page of the midi keyboard mode.

Lots of bug fixes, improvements, updated documentation.

New Modes:

Drum Mode
New MidiFX:

Repeat
Chords
Selector
New Macro Mode:

Deluge
New Passthrough QuickEdit Mode for editing MidiFX and playing keyboard.

Bug Fixes / Improvements:

Incoming midi turns off screensaver
Func Key displays on screen in different scenarios.
Util to erase global mem without needing to reprogram
More helper messages when doing things to avoid confusion
Improved mode selection menu
Improved UI graphics in various areas.
Quantize features for repeat and arps
Global clock is now always running and sending midi clock out
Pot pickup features used with Deluge Macro
Arp mod and transpose pattern editors now show proper shortcuts for F1/F2 and added feature to quickly set the pattern length.
Ability to change the default note velocity
Improved chaining of MidiFX without crashing or causing problems
MidiFx colors being used for selection
Code:

Must build with smallest code compilation option now for T3, otherwise firmware is too big.
Chords Mode:

Preset mode removed and replaced with AUX shortcut to save/load
Presets are auto-saved when changing without explicitly saving
What was previously the preset mode key is now the shortcut for strum
Arp:

Fixes notes from getting stuck on when setting chance below 100
Supports multiple incoming midi channels, notes get sent out to different channels in this case
Randomizer:

Can now randomly delay notes
Can now randomly set midi channels

Adds Drum Mode, bug fixes, and Deluge Macro