Broadlink Control - Broadlink Device nodes for Node-RED

A set of node-red nodes to manage the Broadlink https://www.ibroadlink.com/ RM series of IR Controllers and for home automation. A cost effective way to control Air Conditioners, TV's, Audio equipment and many more like a universal remote control unit.

This is a fork of the work by VladimirSFilippov https://github.com/VladimirSFilippov/node-red-contrib-broadlink with some enhancements and additions I was looking for, including documentation.

If you would like to donate to purchasing some testing hardware or want to buy me a coffee or beer, click here: https://www.paypal.me/mlfunston

Supported Devices

RM-Mini 3 - https://www.ibroadlink.com/rmMini3/
RM-Pro - https://www.ibroadlink.com/rmPro+/
RM 4 and newer mini devices
MP1 - 4 Outlet Power Strip
SP2 - WiFi Smart Socket
SC1 - WiFi Smart Socket - Use the SP2 node

Note: There are other nodes included per below list, however, I have not tested them as I don't have those devices. So let me know if you've had success using them.

A1 - Environment Sensor - https://www.ibroadlink.com/a1/
S1C - SmartONE Alarm Kit - https://www.ibroadlink.com/s1c/

The TC2 device is not directly supported as it communicates via RF to the RM-Pro. However, if you have an RM Pro unit, you can pull the RF codes from the phone app after you have configured it and use those to control the switch. Note that you may need to send them multiple times to ensure it meets the requirements of being divisible by 16. Refer to this thread for similar process: ericmagnuson/rmcontrol#4 (comment)

Installing and Setting up

Add the Broadlink node to node-red through the manage palette tab or command line.

You can either learn commands directly from the RM unit using the node, or from the Broadlink e-control app and export them. You will need the SharedData folder (or broadlinkDB folder from the node) exported from the app as a starting point either way.

Please use the sample broadlinkDB folder as the catalog if you cannot / do not want to extract the file from the e-control app. The RM Node expects files to be formatted a certain way.

Community How-Tos, Videos & Articles

If you find good content related to this set of nodes please share it below:

Boradlink Control Discussion Forum - https://github.com/mlfunston/node-red-contrib-broadlink-control/discussions
Video Tutorial: Broadlink RM4 Pro: Node-RED and Home Assistant setup - https://youtu.be/1U346G3MHGM
Article: Broadlink RM4 Pro: Node-RED and Home Assistant setup - https://peyanski.com/broadlink-rm4-pro-with-home-assistant-and-node-red/

Broadlink e-control App Method

First, configure the Broadlink device through the Broadlink e-control app on your smartphone. You will need to copy some files from your device after setup.

For Apple devices use this app: https://itunes.apple.com/us/app/broadlink-e-control/id793152994?mt=8

Note: The newer Broadlink IHC / Intelligent Home Center app is not compatible with this method at present. Only the e-control app files work with this node at present. If someone wants to have a go at developing this, please fork and submit a pull request. I will not have time to look at this for a bit.

Secondly, newer firmware / devices may not work with the older e-control app, so you may need to use the database files I have included in the brodlinkDB directory and learn the IR codes directly with the example code.

New Broadlink App and Cloud mode - Troubleshooting

The latest Broadlink app may confiure the device in cloud mode which means that it will no longer function locally with this library. This is common for RM4 and RM3 Mini Newer device (eg device type 5f36). If you can discover the device but cannot learn or send, then you likely have this issue.

To reverse this, you will need to reset the device.

Suggested process is as follows:

Remove any existing configured devices or control in the Broadlink app.
Reset device by long press (~6 seconds) the reset button with a pin or paperclip until the LED rapidly flashes.
Use the BroadLink app to connect to WiFi (keep your phone close to RM). AND STOP!!
Do nothing more, dont't add anything more in the app, quit the app and now use the node.

Thanks to https://github.com/QuadrifoglioVerde for the info .

Configuring the Broadlink App

The app itself is not that intuitive, but after you add the RM device you will need to add a user defined device (eg an air conditioner or tv) and buttons. If you use one of the built in devices the remote commands aren't recorded in the files, so make sure to use user defined.

Swipe left on the home screen to reveal your devices.
Select the device
Select the ⚙️ icon and add remote
Click the + sign and add the buttons or functions you want to be able to use in node-red
The app will ask you to point the remote at it and press the appropriate button
Complete the process to add the buttons you need
Click the ⚙️ icon and create shortcut if you want the device to be visible on the app home screen
Return to the home screen and swipe right and click share and Share to other phones in WLAN

Now you are ready to copy the config files from the device to use in the node!

Copying the files from an iPhone

Use an app like iExplorer https://macroplant.com/iexplorer and connect your iPhone to your computer and do a backup using the tool
Explore the backup and open the Apps section of the backup
Find the cn.com.broadlink.e-Control folder and export it to your computer
Put the folder into a location where node-red can see it. You will need the path to the cn.com.broadlink.e-Control.new/Documents/SharedData/ folder later

Copying files from and Android phone

I don't have one, but it should be simpler to find the folder on it and extract it. I did find the below instructions somewhere that you could try. Perhaps someone can contribute here?

Connect your Android device to your computer and browse the SD card/External Storage folder /broadlink/newremote/SharedData/.

Configuring node-red nodes

Assuming you have added the Broadlink nodes and configured as above, you will need the MAC address of the device, IP address and the path to the SharedData folder above. For device type, if you have an older device you can set the default value to 272a. Newer RM3 devices or RM4 requires the correct device type to be entered. You can find your device type via the discover node. Check the example nodes below.

Add the RM node and double click it
Select device and add new rmdevice
Fill in the MAC address of the device, IP address, device type and the full path to the SharedData folder in the Catalog field and click Add
You will then need to save the node and click Deploy so that you can see the buttons you created in the Broadlink app in the node.
Double click on the node again and you should be now able to select Action -> Send and then pick the remote and button you wish to send.
Save node, add an inject node on the front and link them together and deploy.

Now you should be able to click on the inject node and fire a signal to your device!

Start adding extra nodes to fire out the functions you need or inject messages to the node to drive it.

Sending data via msg.payload

Data needs to be formatted as a buffer object, or as a Base64 data string (eg as used by Home Assistant or others).

An example of a function node containing the sample data is shown below.

//Insert learned data object here
var data = [38,0,140,0,77,21,18,22,38,21,17,22,17,22,38,21,18,21,18,22,37,22,17,22,18,21,18,22,17,0,3,99,77,21,18,22,38,21,17,22,18,21,38,21,18,22,17,22,38,21,18,21,18,22,17,22,17,0,3,99,77,21,18,22,37,22,17,22,18,21,38,21,18,22,17,22,37,22,18,21,18,22,17,22,18,0,3,100,76,22,18,21,38,21,18,22,17,22,37,22,18,21,18,22,37,22,17,22,18,21,18,22,17,0,3,101,76,22,18,21,39,20,18,22,17,22,37,22,18,21,18,22,37,22,17,22,18,21,18,22,17,0,13,5,0,0,0,0,0,0,0,0,0,0,0,0];
// or Base64 encoded format from other source
//var data = "JgBMAnM3ECkQKRANEAwRDQ8pEAwQDRApDyoQDQ8pEA0QDRAoECkQDRAoEigQDBEMECkRDBAMECkQDRAMEA0QDRAMEA0QDRANDw4PDQ8NEA0PDRANEA0RDA8NEAwRDBAMESgQDRAMEA0QDRAMESgQKRANEAwRDBApDyoQDBApEA4PDBILEQwQDRAoESgRDBApECkQDBANECkQDBANECgRDBANECkQDBEoEQwQKQ8NEA0QKQ8qEAwQDRAMEA0QDQ8NEA0QDBEMEAwRDQ8ODwwRDBAMEA0QDRAMEA0QDBANEQwQDRAMEA4PDRANEAwQDBANEA0QDBEMEAwQDRAMEA4PDBEMEA0PDRANEAwRDQ4OEAwRDBEMEAwQDRANECgQKRApECkQDBEMEAACMnc4ECgQKRANEQwQDQ8pEQwQDQ8qECgQDRApEA0QDBEoECkQDBEoECkQDRAMECkQDRAMECkQDRANEAwQDRANDw0QDQ8NEQwQDBEMEA0PDRENDw0QDBANDw0QDRANECgRDBAMEA0QDRAMECkRKBANEAwRDBApECkQDBEoEQwQDRAMEA0QDBApECkQDRApECgQDRANECgRDBANECgRDBANECgRDBApEAwQKRANEAwRKBApEQwQDBEMEA0QDBEMEA0QDQ8NDw0RDBAMEQwQDRAMEA0QDBEMEA0QDBANEAwQDRANEAwQDRANEAwQDRAMEA0QDRAMEA0QDBANEA0RCxILEQwQDBEMEA0QDBEMEA0QDQ8NEQwQDBANECkPKhApECkQDBANEAANBQAAAAAAAAAAAAAAAA=="

msg.payload={
    //"mac":"MAC address of your broadlink rm",  // Optional if configured in the RM node
    //"host":"IP address of your broadlink rm",  // Optional if configured in the RM node
    "action":"send",
    "data":data,
    "repeat":2
};

return msg;

This should then be connected to the RM node to send the data.

Examples

There are example flows to provide some additional functions / templates to use. You can get the exmple flows from the Node Red hamburger menu (top right corner), choose Import -> Examples -> broadlink-control and pick your example.

Example 1: Add new button to the RM node database

This example allows modification of the RM node database files (jsonSubIr, jsonButton and jsonIrCode) so you can add new buttons and IR codes without having to re-import from the Broadlink App. New Devices and Buttons can also be added here.

Set your data file location and new device, button name and IR codes in the Config node in the example.

Note: If your Broadlink files contain any non standard characters eg the degree symbol then it will not load the file correctly. Also I noted that the e-control app put the incorrect quotation marks around some of the parameters, so this may need to be fixed in your file first before using this script. I have supplied some example database files in the broadlinkDB directory.

Example:

The " marks are incorrect at the end of name, start and end of OFF and start of index in the example above. Check to make sure yours are correct. This is also what causes "undefined" to be displayed in the button list.

Example 2: Return IR Codes based on Device and Button Names

This example allows you to pull the IR code out from the data files based on the device and button name. You can then directly send them with the RM node. This allows programmatic selection of the device and button.

Set your data file location and device and button name and the IR codes will be returned in the msg.payload.

Example 3: Learn and Send Data

This example allows you to Learn an IR code with the RM device and then Send those out directly.

Set your RM device details in the RM nodes in the example and the data string in the function node in the send example. You can use this as an example to programmatically learn and send data from and to the RM device.

To Do

Create GUI Tool or Example in the Node Red Dashboard to Learn and Send IR Codes - Check out the example nodes
Create function to read the newer DB from the Broadlink IHC App

Authors & Contributors

Vladimir Filippov - Author for the Initial build - VladimirSFilippov
Mark Funston - Documentation and enhancements - mlfunston
Bouni - fixed get_energy for SP3S devices - Bouni
ivog1 - fix for UDP close port bug - ivog1
neroxps - fix for MP1 S1 status error bug - neroxps
deadly667 - fix for newer device headers RM4, etc deadly667

Feel free to fork this and provide updates and new features! Don't forget to submit a pull request.

License

This project is licensed under the MIT License - see the LICENSE file for details

Acknowledgments

This Node-RED module is based on the great work of VladimirSFilippov - VladimirSFilippov, using his node-red-contrib-broadlink libraries. Also thanks to the python-broadlink repository from Matthew Garrett.