ADD bs28 TEST

keyboards/yandrstudio/whiteMouse28T/config.h

@@ -0,0 +1,74 @@
+/* Copyright 2021 JasonRen(biu)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xAA96
+#define PRODUCT_ID 0xAA05
+#define DEVICE_VER 0x0001
+#define MANUFACTURER JasonRen biu
+#define PRODUCT whiteMouse28T
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 7
+
+// 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
+#define MATRIX_COL_PINS { B14, B15, A8, A9, A10, B4, B3}
+#define MATRIX_ROW_PINS { B13, B12, B7, B6}
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+
+// enable the nkro when using the VIA.
+#define FORCE_NKRO
+
+// fix VIA RGB_light
+#define VIA_HAS_BROKEN_KEYCODES
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+
+
+/* RGN Matrix */
+#ifdef RGB_MATRIX_ENABLE
+
+# define RGB_DI_PIN B5
+# define RGBLED_NUM 2
+# define DRIVER_LED_TOTAL RGBLED_NUM
+
+
+# define WS2812_SPI SPID1 // default: SPID1
+# define WS2812_SPI_MOSI_PAL_MODE 5
+
+# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180
+# define RGBLIGHT_VAL_STEP 18
+# define RGB_DISABLE_WHEN_USB_SUSPENDED true
+# define RGB_MATRIX_CENTER { 32, 96 }
+# define RGB_MATRIX_KEYPRESSES
+# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+
+#endif
+
+
+

keyboards/yandrstudio/whiteMouse28T/f401/board.h

@@ -0,0 +1,24 @@
+/* Copyright 2020 Nick Brassel (tzarc)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include_next "board.h"
+
+#undef STM32_HSE_BYPASS
+#ifdef STM32_HSECLK
+#undef STM32_HSECLK
+#endif // STM32_HSECLK
+#define STM32_HSECLK 8000000

keyboards/yandrstudio/whiteMouse28T/f401/halconf.h

@@ -0,0 +1,36 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ * `qmk chibios-confmigrate -i keyboards/zvecr/zv48/f401/halconf.h -r platforms/chibios/common/configs/halconf.h`
+ */
+
+#pragma once
+
+
+// #undef HAL_USE_PWM
+// #define HAL_USE_PWM TRUE
+
+// #define HAL_USE_SERIAL TRUE
+#undef SERIAL_USB_BUFFERS_SIZE
+#define SERIAL_USB_BUFFERS_SIZE 256
+
+#undef HAL_USE_SPI
+#define HAL_USE_SPI TRUE
+
+
+#include_next <halconf.h>

keyboards/yandrstudio/whiteMouse28T/f401/mcuconf.h

@@ -0,0 +1,93 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ * `qmk chibios-confmigrate -i keyboards/zvecr/zv48/f401/mcuconf.h -r platforms/chibios/BLACKPILL_STM32_F401/configs/mcuconf.h`
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+// #undef STM32_PWM_USE_TIM3
+// #define STM32_PWM_USE_TIM3 TRUE
+
+#undef STM32_SERIAL_USE_USART1
+#define STM32_SERIAL_USE_USART1 FALSE
+
+#undef STM32_SPI_USE_SPI1
+#define STM32_SPI_USE_SPI1 TRUE
+
+
+#undef STM32_NO_INIT
+#undef STM32_HSI_ENABLED
+#undef STM32_LSI_ENABLED
+#undef STM32_HSE_ENABLED
+#undef STM32_LSE_ENABLED
+#undef STM32_CLOCK48_REQUIRED
+#undef STM32_SW
+#undef STM32_PLLSRC
+#undef STM32_PLLM_VALUE
+#undef STM32_PLLN_VALUE
+#undef STM32_PLLP_VALUE
+#undef STM32_PLLQ_VALUE
+#undef STM32_HPRE
+#undef STM32_PPRE1
+#undef STM32_PPRE2
+#undef STM32_RTCSEL
+#undef STM32_RTCPRE_VALUE
+#undef STM32_MCO1SEL
+#undef STM32_MCO1PRE
+#undef STM32_MCO2SEL
+#undef STM32_MCO2PRE
+#undef STM32_I2SSRC
+#undef STM32_PLLI2SN_VALUE
+#undef STM32_PLLI2SR_VALUE
+#undef STM32_PVD_ENABLE
+#undef STM32_PLS
+#undef STM32_BKPRAM_ENABLE
+
+#define STM32_NO_INIT FALSE
+#define STM32_HSI_ENABLED TRUE
+#define STM32_LSI_ENABLED TRUE
+#define STM32_HSE_ENABLED TRUE
+#define STM32_LSE_ENABLED FALSE
+#define STM32_CLOCK48_REQUIRED TRUE
+#define STM32_SW STM32_SW_PLL
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE 8
+#define STM32_PLLN_VALUE 192
+#define STM32_PLLP_VALUE 4
+#define STM32_PLLQ_VALUE 4
+#define STM32_HPRE STM32_HPRE_DIV1
+#define STM32_PPRE1 STM32_PPRE1_DIV4
+#define STM32_PPRE2 STM32_PPRE2_DIV2
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE 8
+#define STM32_MCO1SEL STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE 192
+#define STM32_PLLI2SR_VALUE 5
+#define STM32_PVD_ENABLE FALSE
+#define STM32_PLS STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE FALSE
+
+
+

keyboards/yandrstudio/whiteMouse28T/f401/rules.mk

@@ -0,0 +1,9 @@
+# MCU name
+MCU = STM32F401
+
+# Address of the bootloader in system memory
+STM32_BOOTLOADER_ADDRESS = 0x1FFF0000
+
+# Disable unsupported hardware
+# AUDIO_SUPPORTED = no
+# BACKLIGHT_SUPPORTED = no

keyboards/yandrstudio/whiteMouse28T/info-via.json

@@ -0,0 +1,57 @@
+{
+ "name": "BS28",
+ "vendorId": "0xAA96",
+ "productId": "0xAA05",
+ "lighting": {
+ "extends": "none",
+ "keycodes": "qmk"
+ },
+ "matrix": { "rows": 4, "cols": 7 },
+ "layouts": {
+ "keymap":
+ [
+ [
+ "0,0",
+ "0,1",
+ "0,2",
+ "0,3",
+ "0,4",
+ "0,5",
+ "0,6"
+ ],
+ [
+ {
+ "f": 1
+ },
+ "1,0",
+ {
+ "f": 3
+ },
+ "1,1",
+ "1,2",
+ "1,3",
+ "1,4",
+ "1,5",
+ "1,6"
+ ],
+ [
+ "2,0",
+ "2,1",
+ "2,2",
+ "2,3",
+ "2,4",
+ "2,5",
+ "2,6"
+ ],
+ [
+ "3,0",
+ "3,1",
+ "3,2",
+ "3,3",
+ "3,4",
+ "3,5",
+ "3,6"
+ ]
+ ]
+ }
+}

keyboards/yandrstudio/whiteMouse28T/keymaps/default/keymap.c

@@ -0,0 +1,26 @@
+/* Copyright 2021 JasonRen(biu)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ LAYOUT(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H,
+ KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, KC_TRNS, KC_RCTL)
+
+};

keyboards/yandrstudio/whiteMouse28T/keymaps/via/keymap.c

@@ -0,0 +1,26 @@
+/* Copyright 2021 JasonRen(biu)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http:https://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ LAYOUT(
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H,
+ KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, KC_TRNS, KC_RCTL)
+
+};

keyboards/yandrstudio/whiteMouse28T/keymaps/via/rules.mk

@@ -0,0 +1 @@
+VIA_ENABLE = yes

keyboards/yandrstudio/whiteMouse28T/readme.md

@@ -0,0 +1,15 @@
+whiteMouse28T
+===
+
+A 68 keys keyboard with rgb (keys and underground).
+This keyboard use 8mhz HSE and STM32F401 as MCU.
+
+Keyboard Maintainer: https://github.com/jiaxin96
+Hardware Supported: whiteMouse28T
+Hardware Availability: https://github.com/Oh-My-Mechanical-Keyboard 
+
+Make example for this keyboard (after setting up your build environment):
+
+ make yandrstudio/whiteMouse28T/f401:default
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

keyboards/yandrstudio/whiteMouse28T/rules.mk

@@ -0,0 +1,17 @@
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+# KEYBOARD_SHARED_EP = yes # Free up some extra endpoints - needed if console+mouse+extra
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes # USB Nkey Rollover
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
+WS2812_DRIVER = spi
+