Simple MPTCP Tunnel

• run go build in this floder and then sudo MPTCPTun-Go -h
• Only Linux kernels >= v5.16 CAN USE MPTCP, Windows is NOT supported
• BBR can improve the Network Speed

• In any case, it is similar to ordinary TCP, the only advantage is failover
• If you want to improve your Connection in high Loss, Visit https://github.com/apernet/hysteria

• Linux内核必须大于5.16 否则无法使用
• 建议配合BBR+FQ或者BBR+Cake使用
• 编译后 sudo MPTCPTun-Go -h 查看使用方法
• 如果追求速度 请使用hysteria(https://github.com/apernet/hysteria) MPTCP拯救不了高丢包 只能拯救容易断连,但有备用方案的网络
• 基本环境跑起来的速度和TCP基本一致 并未发现优势 甚至慢了点
• Stringline 方法从 https://github.com/ginuerzh/gost 获取