ESP32-S3 development board with JTAG/USB-OTG and LiPo charger
ESP32-S3-DevKit-LiPo is small board capable to run Linux kernel 6.3
- ESP32-S3-WROOM-1-N8R8 8MB RAM 8 MB Flash
- Green Status LED
- Yellow Charge LED
- pUEXT connector
- USB-C power supply and USB-Serial programmer
- USB-C OTG JTAG/Serial connector
- LiPo charger
- LiPo battery connector
- External power sense
- Battery measurement
- Automatic power supply switch between USB and LiPo
- RESET button
- USER button
- Hardware is released under CERN Open Hardware Licence Version 2 - Strongly Reciprocal, all silkscreen credits to Olimex should remain;
- Software is released under GPL3 Licensee
- Documentation is released under CC BY-SA 3.0
