Official Golang execution layer implementation of the Ronin protocol. It is a fork of Go Ethereum - https://github.com/ethereum/go-ethereum and EVM compatible.
Ronin consensus uses Proof of Staked Authority, a combination of dPoS and PoA, to increase the level of decentralization and allows the token holders to join the network as validators
Check out the whitepaper for more information.
The go-ethereum project comes with several wrappers/executables found in the cmd
directory.
Command | Description |
---|---|
ronin |
Our main Ronin CLI client. It is the entry point into the Ronin network (main-, test- or private net), capable of running as a full node (default), archive node (retaining all historical state) or a light node (retrieving data live). It can be used by other processes as a gateway into the Ronin network via JSON RPC endpoints exposed on top of HTTP, WebSocket and/or IPC transports. ronin --help and the CLI page for command line options. |
clef |
Stand-alone signing tool, which can be used as a backend signer for ronin . |
devp2p |
Utilities to interact with nodes on the networking layer, without running a full blockchain. |
abigen |
Source code generator to convert Ethereum contract definitions into easy to use, compile-time type-safe Go packages. It operates on plain Ethereum contract ABIs with expanded functionality if the contract bytecode is also available. However, it also accepts Solidity source files, making development much more streamlined. Please see our Native DApps page for details. |
bootnode |
Stripped down version of our Ethereum client implementation that only takes part in the network node discovery protocol, but does not run any of the higher level application protocols. It can be used as a lightweight bootstrap node to aid in finding peers in private networks. |
evm |
Developer utility version of the EVM (Ethereum Virtual Machine) that is capable of running bytecode snippets within a configurable environment and execution mode. Its purpose is to allow isolated, fine-grained debugging of EVM opcodes (e.g. evm --code 60ff60ff --debug run ). |
rlpdump |
Developer utility tool to convert binary RLP (Recursive Length Prefix) dumps (data encoding used by the Ethereum protocol both network as well as consensus wise) to user-friendlier hierarchical representation (e.g. rlpdump --hex CE0183FFFFFFC4C304050583616263 ). |
puppeth |
a CLI wizard that aids in creating a new Ethereum network. |
Going through all the possible command line flags is out of scope here (please consult our
CLI Wiki page),
but we've enumerated a few common parameter combos to get you up to speed quickly
on how you can run your own geth
instance.
Running a full Ronin node:
- CPU: Equivalent of 8 AWS vCPU
- RAM: 16GB
- Storage: At least 1 TB high-speed SSD
- Network: Reliable IPv4 or IPv6 network connection, with an open public port
Running an archive Ronin node:
- CPU: Equivalent of 8 AWS vCPU
- RAM: 16GB
- Storage: At least 5 TB high-speed SSD
- Network: Reliable IPv4 or IPv6 network connection, with an open public port
Building ronin
requires both a Go (version 1.17 or later) and a C compiler. You can install
them using your favourite package manager. Once the dependencies are installed, run
make ronin
or, to build the full suite of utilities:
make all
Before running a full node, init genesis block is necessary
ronin init genesis/mainnet.json --datadir /opt/ronin
$ ronin --http.api eth,net,web3,consortium --networkid 2020 --discovery.dns enrtree:https://AIGOFYDZH6BGVVALVJLRPHSOYJ434MPFVVQFXJDXHW5ZYORPTGKUI@nodes.roninchain.com --datadir /opt/ronin --port 30303 --http --http.corsdomain '*' --http.addr 0.0.0.0 --http.port 8545 --http.vhosts '*' --ws --ws.addr 0.0.0.0 --ws.port 8546 --ws.origins '*'
This command will:
- Start
ronin
in full sync mode (default, can be changed with the--syncmode
flag), causing it to download more data in exchange for avoiding processing the entire history of the Ronin network, which is very CPU intensive.
As an alternative to passing the numerous flags to the ronin
binary, you can also pass a
configuration file via:
$ ronin --config /path/to/your_config.toml
To get an idea of how the file should look like you can use the dumpconfig
subcommand to
export your existing configuration:
$ ronin --your-favourite-flags dumpconfig
As a developer, sooner rather than later you'll want to start interacting with ronin
and the
Ronin network via your own programs and not manually through the console. To aid
this, ronin
has built-in support for a JSON-RPC based APIs which are the same as Ethereum that can be found at (standard APIs
and ronin
specific APIs).
These can be exposed via HTTP, WebSockets and IPC (UNIX sockets on UNIX based
platforms, and named pipes on Windows).
The IPC interface is enabled by default and exposes all the APIs supported by ronin
,
whereas the HTTP and WS interfaces need to manually be enabled and only expose a
subset of APIs due to security reasons. These can be turned on/off and configured as
you'd expect.
HTTP based JSON-RPC API options:
--http
Enable the HTTP-RPC server--http.addr
HTTP-RPC server listening interface (default:localhost
)--http.port
HTTP-RPC server listening port (default:8545
)--http.api
API's offered over the HTTP-RPC interface (default:eth,net,web3
)--http.corsdomain
Comma separated list of domains from which to accept cross origin requests (browser enforced)--ws
Enable the WS-RPC server--ws.addr
WS-RPC server listening interface (default:localhost
)--ws.port
WS-RPC server listening port (default:8546
)--ws.api
API's offered over the WS-RPC interface (default:eth,net,web3
)--ws.origins
Origins from which to accept websockets requests--ipcdisable
Disable the IPC-RPC server--ipcapi
API's offered over the IPC-RPC interface (default:admin,debug,eth,miner,net,personal,shh,txpool,web3
)--ipcpath
Filename for IPC socket/pipe within the datadir (explicit paths escape it)
You'll need to use your own programming environments' capabilities (libraries, tools, etc) to
connect via HTTP, WS or IPC to a geth
node configured with the above flags and you'll
need to speak JSON-RPC on all transports. You
can reuse the same connection for multiple requests!
Note: Please understand the security implications of opening up an HTTP/WS based transport before doing so! Hackers on the internet are actively trying to subvert Ethereum nodes with exposed APIs! Further, all browser tabs can access locally running web servers, so malicious web pages could try to subvert locally available APIs!
- Quality: Code in the Ronin project should meet the style guidelines, with sufficient test-cases, descriptive commit messages, evidence that the contribution does not break any compatibility commitments or cause adverse feature interactions, and evidence of high-quality peer-review.
- Size: The Ronin project's culture is one of small pull-requests, regularly submitted. The larger a pull-request, the more likely it is that you will be asked to resubmit as a series of self-contained and individually reviewable smaller PRs.
- Maintainability: If the feature will require ongoing maintenance (eg support for a particular branch of database), we may ask you to accept responsibility for maintaining this feature
- Commit message: Commit messages of Ronin project follows https://www.conventionalcommits.org/en/v1.0.0/
- Create a new issue
- Comment on the issue (if you'd like to be assigned to it) - that way our team can assign the issue to you
- If you do not have a specific contribution in mind, you can also browse the issues labelled as
help wanted
- Issues that additionally have the
good first issue
label are considered ideal for first-timers
- After your changes are committed to your GitHub fork, submit a pull request (PR) to the
master
branch of the axieinfinity/ronin repo - In your PR description, reference the issue it resolves (see linking a pull request to an issue using a keyword)
- ex:
[FIXES #123] feat: update out of date content
- ex:
- The team reviews every PR
- Acceptable PRs will be approved & merged into the
master
branch
- You can view the history of release, which include PR highlights
The go-ethereum library (i.e. all code outside of the cmd
directory) is licensed under the
GNU Lesser General Public License v3.0,
also included in our repository in the COPYING.LESSER
file.
The go-ethereum binaries (i.e. all code inside of the cmd
directory) is licensed under the
GNU General Public License v3.0, also
included in our repository in the COPYING
file.