PigPen is map-reduce for Clojure, or distributed Clojure. It compiles to Apache Pig or Cascading but you don't need to know much about either of them to use it.
Getting started with Clojure and PigPen is really easy.
- The wiki explains what PigPen does and why we made it
- The tutorial is the best way to get Clojure and PigPen installed and start writing queries
- The full API lists all of the operators with example usage
- PigPen for Clojure users is great for Clojure users new to map-reduce
- PigPen for Pig users is great for Pig users new to Clojure
- PigPen for Cascading users is great for Cascading users new to Clojure
Note: It is strongly recommended to familiarize yourself with Clojure before using PigPen.
Note: PigPen is not a Clojure wrapper for writing Pig scripts you can hand edit. While entirely possible, the resulting scripts are not intended for human consumption.
- [email protected]
- Group discussion archives can be accessed here
pigpen
is available from Maven:
With Leiningen:
;; core library
[com.netflix.pigpen/pigpen "0.3.3"]
;; pig support
[com.netflix.pigpen/pigpen-pig "0.3.3"]
;; cascading support
[com.netflix.pigpen/pigpen-cascading "0.3.3"]
;; rx support
[com.netflix.pigpen/pigpen-rx "0.3.3"]
The platform libraries all reference the core library, so you only need to reference the platform specific one that you require and the core library should be included transitively.
Note: PigPen requires Clojure 1.5.1 or greater
To use the parquet loader, add this to your dependencies:
[com.netflix.pigpen/pigpen-parquet-pig "0.3.3"]
Here an example of how to write parquet data.
(require '[pigpen.core :as pig])
(require '[pigpen.parquet :as pqt])
;;
;; assuming that `data` is in tuples
;;
;; [["John" "Smith" 28]
;; ["Jane" "Doe" 21]]
(defn save-to-parquet
[output-file data]
(->> data
;; turning tuples into a map
(pig/map (partial zipmap [:firstname :lastname :age]))
;; then storing to Parquet files
(pqt/store-parquet
output-file
(pqt/message "test-schema"
;; the field names here MUST match the map's keys
(pqt/binary "firstname")
(pqt/binary "lastname")
(pqt/int64 "age")))))
And how to load the records back:
(defn load-from-parquet
[input-file]
;; the output will be a sequence of maps
(pqt/load-parquet
input-file
(pqt/message "test-schema"
(pqt/binary "firstname")
(pqt/binary "lastname")
(pqt/int64 "age"))))
And check out the pigpen.parquet
namespace for usage.
Note: Parquet is currently only supported by Pig
To use the avro loader (alpha), add this to your dependencies:
[com.netflix.pigpen/pigpen-avro-pig "0.3.3"]
And check out the pigpen.avro
namespace for usage.
Note: Avro is currently only supported by Pig
-
0.3.3 - 5/19/16
- Explicitly disable
*print-length*
and*print-level*
when generating scripts - Add a better error message for storage types that expect a map with keywords
- Explicitly disable
-
0.3.2 - 1/12/16
- Allow more types in generated pig scripts
-
0.3.1 - 10/19/15
- Update cascading version to 2.7.0
- Report correct pigpen version to concurrent
- Update nippy to 2.10.0 & tune performance
-
0.3.0 - 5/18/15
- No changes
-
0.3.0-rc-7 - 4/29/15
- Fixed bug in local mode where nils weren't handled consistently
-
0.3.0-rc.6 - 4/14/15
- Add local mode code eval memoization to avoid thrashing permgen
- Added
pigpen.pig/set-options
command to explicitly set pig options in a script. This was previously available (though undocumented) by setting{:pig-options {...}}
in any options block, but is now official.
-
0.3.0-rc.5 - 4/9/15
- Update core.async version
-
0.3.0-rc.4 - 4/8/15
- Memoize code evaluation when run in the cluster
-
0.3.0-rc.3 - 4/2/15
- Bugfixes
-
0.3.0-rc.2 - 3/30/15
- Parquet refactor. Local parquet loading no longer depends on Pig. Parquet schemas are now defined using Parquet classes.
-
0.3.0-rc.1 - 3/23/15
- Added Cascading support
pigpen.cascading/generate-flow
- Generate a cascading flow from a pigpen querypigpen.cascading/load-tap
- Load data from an existing cascading tappigpen.cascading/store-tap
- Store data using an existing cascading tap
- Added
pigpen.core/keys-fn
, a new convenience macro to support named anonymous functions. Like keys destructuring, but less verbose. - New function based operators to build more dynamic scripts. These are function versions of all the core pigpen macros, but you have to handle quoting user code manually. These were previously available, but not officially supported. Now they're alpha, but supported and documented. See
pigpen.core.fn
- New lower-level operators to build custom storage and commands. These were previously available, but not officially supported. Now they're alpha, but supported and documented. See
pigpen.core.op
- *** Breaking Changes ***
pigpen.core/script
is nowpigpen.core/store-many
pigpen.core/generate-script
is nowpigpen.pig/generate-script
pigpen.core/write-script
is nowpigpen.pig/write-script
pigpen.core/show
is nowpigpen.viz/show
(requires dependency[com.netflix.pigpen/pigpen-viz "..."]
)pig/dump
has changed. The old version was based on rx-java, and still exists aspigpen.rx/dump
. The replacement forpigpen.core/dump
is now entirely Clojure based. The Clojure version is better for unit tests and small data. All stages are evaluated eagerly, so the stack traces are simpler to read. The rx version is lazy, including the load-* commands. This means that you can load a large file, take a few rows, and process them without loading the entire file into memory. The downside is confusing stack traces and extra dependencies. See here for more details.- The interface for building custom loaders and storage has changed. See here for more details. Please email [email protected] with any questions.
- Added Cascading support
-
0.2.15 - 2/20/15
- Include sources in jars
-
0.2.14 - 2/18/15
- Avro updates
-
0.2.13 - 1/19/15
- Added
load-avro
in the pigpen-avro project: http:https://avro.apache.org/ - Fixed the nRepl configuration; use
gradlew nRepl
to start an nRepl - Exclude nested relations from closures
- Added
-
0.2.12 - 12/16/14
- Added
load-csv
, which allows for quoting per RFC 4180
- Added
-
0.2.11 - 10/24/14
- Fixed a bug (feature?) introduced by new rx version. Also upgraded to rc7. This would have only affected local mode where the data being read was faster than the code consuming it.
-
0.2.10 - 9/21/14
- Removed load-pig and store-pig. The pig data format is very bad and should not be used. If you used these and want them back, email [email protected] and we'll put it into a separate jar. The jars required for this feature were causing conflicts elsewhere.
- Upgraded the following dependencies:
- org.clojure/clojure 1.5.1 -> 1.6.0 - this was also changed to a provided dependency, so you should be able to use any version greater than 1.5.1
- org.clojure/data.json 0.2.2 -> 0.2.5
- com.taoensso/nippy 2.6.0-RC1 -> 2.6.3
- clj-time 0.5.0 - no longer needed
- joda-time 2.2 -> 2.4 - pig needs this to run locally
- instaparse 1.2.14 - no longer needed
- io.reactivex/rxjava 0.9.2 -> 1.0.0-rc.1
- Fixed the rx limit bug.
pigpen.local/*max-load-records*
is no longer required.
-
0.2.9 - 9/16/14
- Fix a local-mode bug in
pigpen.fold/avg
where some collections would produce a NPE. - Change fake pig delimiter to \n instead of \0. Allows for \0 to exist in input data.
- Remove 1000 record limit for local-mode. This was originally introduced to mitigate an rx bug. Until #61 is fixed, bind
pigpen.local/*max-load-records*
to the maximum number of records you want to read locally when reading large files. This now defaults tonil
(no limit). - Fix a local dispatch bug that would prevent loading folders locally
- Fix a local-mode bug in
-
0.2.8 - 7/31/14
- Fix a bug in
load-tsv
andload-lazy
- Fix a bug in
-
0.2.7 - 7/31/14 *** Don't use ***
- Fix
load-lazy
and speed up bothload-tsv
andload-lazy
- Convert to multi-project build
- Added pigpen-parquet with initial support for loading the Parquet format: https://github.com/apache/incubator-parquet-mr
- Fix
-
0.2.6 - 6/17/14
- Minor optimization for local mode. The creation of a UDF was occurring for every value processed, causing it to run out of perm-gen space when processing large collections locally.
- Fix
(pig/return [])
- Fix
(pig/dump (pig/reduce + (pig/return [])))
- Fix
Long
s in scripts that are larger than an Integer - Memoize local UDF instances per use of
pig/dump
- The jar location in the generated script is now configurable. Use the
:pigpen-jar-location
option withpig/generate-script
orpig/write-script
.
-
0.2.5 - 4/9/14
- Remove
dump&show
anddump&show+
in favor ofpigpen.oven/bake
. Callbake
once and pass to as many outputs as you want. This is a breaking change, but I didn't increment the version becausedump&show
was just a tool to be used in the REPL. No scripts should break because of this change. - Remove
dymp-async
. It appeared to be broken and was a bad idea from the start. - Fix self-joins. This was a rare issue as a self join (with the same key) just duplicates data in a very expensive way.
- Clean up functional tests
- Fix
pigpen.oven/clean
. When it was pruning the graph, it was also removing REGISTER commands.
- Remove
-
0.2.4 - 4/2/14
- Fix arity checking bug (affected varargs fns)
- Fix cases where an Algebraic fold function was falling back to the Accumulator interface, which was not supported. This affected using
cogroup
withfold
over multiple relations. - Fix debug mode (broken in 0.1.5)
- Change UDF initialization to not rely on memoization (caused stale data in REPL)
- Enable AOT. Improves cluster perf
- Add
:partition-by
option todistinct
-
0.2.3 - 3/27/14
- Added
load-json
,store-json
,load-string
,store-string
- Added
filter-by
, andremove-by
- Added
-
0.2.2 - 3/25/14
- Fixed bug in
pigpen.fold/vec
. This would also causefold/map
andfold/filter
to not work when run in the cluster.
- Fixed bug in
-
0.2.1 - 3/24/14
- Fixed bug when using
for
to generate scripts - Fixed local mode bug with
map
followed byreduce
orfold
- Fixed bug when using
-
0.2.0 - 3/3/14
- Added pigpen.fold - Note: this includes a breaking change in the join and cogroup syntax as follows:
; before (pig/join (foo on :f) (bar on :b optional) (fn [f b] ...)) ; after (pig/join [(foo :on :f) (bar :on :b :type :optional)] (fn [f b] ...))
Each of the select clauses must now be wrapped in a vector - there is no longer a varargs overload to either of these forms. Within each of the select clauses, :on is now a keyword instead of a symbol, but a symbol will still work if used. If
optional
orrequired
were used, they must be updated to:type :optional
and:type :required
, respectively. -
0.1.5 - 2/17/14
- Performance improvements
- Implemented Pig's Accumulator interface
- Tuned nippy
- Reduced number of times data is serialized
- Performance improvements
-
0.1.4 - 1/31/14
- Fix sort bug in local mode
-
0.1.3 - 1/30/14
- Change Pig & Hadoop to be transitive dependencies
- Add support for consuming user code via closure
-
0.1.2 - 1/3/14
- Upgrade instaparse to 1.2.14
-
0.1.1 - 1/3/14
- Initial Release