Parameter update for previous commit

The Makefile updates from the previous commit included an update to
MOM6, but did not include updates to the parameters.

Under our current rules, this was an error.  However, the more important
rule is that we do not break the history of dev/gfdl MOM6-examples.  So
these are being committed separately.  Hopefully it will not happen
again.

For the sake of bookkeeping:

NOAA-GFDL/MOM6@e1ea758: Add the debugging routine test_L_open_concave

coupled_AM2_LM3_SIS2/AM2_SIS2_MOM6i_1deg/MOM_parameter_doc.all

@@ -848,6 +848,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

coupled_AM2_LM3_SIS2/Concurrent_ice_1deg/MOM_parameter_doc.all

@@ -848,6 +848,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

coupled_AM2_LM3_SIS2/Intersperse_ice_1deg/MOM_parameter_doc.all

@@ -848,6 +848,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

ice_ocean_SIS2/Baltic/MOM_parameter_doc.all

@@ -848,6 +848,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

ice_ocean_SIS2/Baltic_ALE_z_offline_tracers/MOM_parameter_doc.all

@@ -998,6 +998,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

ice_ocean_SIS2/Baltic_OM4_025/MOM_parameter_doc.all

@@ -1092,6 +1092,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

ice_ocean_SIS2/Baltic_OM4_05/MOM_parameter_doc.all

@@ -1096,6 +1096,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

ice_ocean_SIS2/OM4_025/MOM_parameter_doc.all

@@ -1092,6 +1092,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

ice_ocean_SIS2/OM4_05/MOM_parameter_doc.all

@@ -1096,6 +1096,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

ice_ocean_SIS2/OM_1deg/MOM_parameter_doc.all

@@ -1083,6 +1083,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

ice_ocean_SIS2/SIS2/MOM_parameter_doc.all

@@ -820,6 +820,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

ice_ocean_SIS2/SIS2_bergs_cgrid/MOM_parameter_doc.all

@@ -820,6 +820,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

ice_ocean_SIS2/SIS2_cgrid/MOM_parameter_doc.all

@@ -820,6 +820,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

ocean_only/global_ALE/hycom/MOM_parameter_doc.all

@@ -1038,6 +1038,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

ocean_only/global_ALE/layer/MOM_parameter_doc.all

@@ -927,6 +927,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

ocean_only/global_ALE/z/MOM_parameter_doc.all

@@ -985,6 +985,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL

ocean_only/nonBous_global/MOM_parameter_doc.all

@@ -772,6 +772,9 @@ SMAG_CONST_CHANNEL = 0.15 ! [nondim] default = 0.15
  ! channel drag if it is enabled. The default is to use the same value as
  ! SMAG_LAP_CONST if it is defined, or 0.15 if it is not. The value used is also
  ! 0.15 if the specified value is negative.
+TRIG_CHANNEL_DRAG_WIDTHS = True ! [Boolean] default = True
+ ! If true, use trigonometric expressions to determine the fractional open
+ ! interface lengths for concave topography.
 CHANNEL_DRAG_MAX_BBL_THICK = 5.0 ! [m] default = 5.0
  ! The maximum bottom boundary layer thickness over which the channel drag is
  ! exerted, or a negative value for no fixed limit, instead basing the BBL