pip3 install -r requirements.txt

sudo ip link set can0 up type can bitrate 250000

usage: E3onCANcollect.py [-h] [-c CAN] [-dev vx3|vcal|vair|e380|e3100cb] [-canid CANID] [-r READ] [-raw] [-m MQTT] [-mfstr MQTTFORMATSTRING] [-muser MQTTUSER] [-mpass MQTTPASS] [-retain] [-retainall] [-v]

options:
-h, --help            show this help message and exit
-c CAN, --can CAN     use can device, e.g. can0
-dev dev, --dev dev   device, vx3 or vcal or vair or e380 or e3100cb
-canid CANID, --canid CANID
                      CAN ID to listen to, e.g. -canid 0x451, overrides CAN ID selected by device
-r READ, --read READ  read did, e.g. 1690,1834
-raw, --raw           return raw data for all dids
-g, --gap             minimum time gap (seconds) between decoding of specific dids.
                      Default: 0 => immediate decoding.
-m MQTT, --mqtt MQTT  publish to server, e.g. localhost:1883:topicname
-mfstr MQTTFORMATSTRING, --mqttformatstring MQTTFORMATSTRING
                      mqtt formatstring e.g. {device}_{didNumber:04d}_{didName}
-muser MQTTUSER, --mqttuser MQTTUSER
                      mqtt username
-mpass MQTTPASS, --mqttpass MQTTPASS
                      mqtt password
-retain dids, --retain dids
                      set mqtt retain flag for dids, e.g. 1834,1836
-retainall, --retainall
                      set mqtt retain flag for all dids
-v, --verbose         verbose info

python3 E3onCANcollect.py -c can0 -dev vx3 -r 1834 -v
2023-11-15 18:00:37.186155 1834 ElectricalEnergyStorageStateOfEnergy: {"SoC": 3863.0, "Unkown": 0.0}
2023-11-15 18:00:49.215978 1834 ElectricalEnergyStorageStateOfEnergy: {"SoC": 3858.0, "Unkown": 0.0}

python3 E3onCANcollect.py -c can0 -dev e380 -r 0x250,0x256 -v
2023-11-15 18:02:49.874932 592 GridActivePower: {"L1": 96.0, "L2": 7.0, "L3": -108.0, "Total": -4.0}
2023-11-15 18:02:49.878761 598 GridVoltage: {"L1": 233.0, "L2": 234.0, "L3": 233.0, "Frequency": 50.0}

python3 E3onCANcollect.py -c can0 -dev vx3 -r 1690,1834 -m localhost:1883:open3e
-> will decode received data points and publish data to broker localhost on topic open3e/did_name

python3 E3onCANcollect.py -c can0 -dev vx3 -m localhost:1883:open3e -mfstr {device}_{didNumber:04d}_{didName} -retain 1834
-> will publish **all** received dids with custom identifier format: e.g. open3e/vx3_1690_ElectricalEnergySystemPhotovoltaicStatus
-> mqtt retain flag for did 1834 will be set

candump -t a can0 > candump.log
python3 E3onCANcollect.py -f candump.log -dev vx3 -canid 0x451 -v
2023-11-15 14:39:11.046815 378 PointOfCommonCouplingPhaseOne: {"ActivePower": 55.0, "ReactivePower": -119.0}
2023-11-15 14:39:11.059317 379 PointOfCommonCouplingPhaseTwo: {"ActivePower": -22.0, "ReactivePower": -81.0}
2023-11-15 14:39:11.073367 380 PointOfCommonCouplingPhaseThree: {"ActivePower": -38.0, "ReactivePower": -89.0}