NOTE: Tested with the Sipeed Longan Nano Dev-Board

Apart from the Platformio/VsCode install, run: sudo apt install libusb-dev stm32flash binutils build-essential.

Don't forget to add the udev rules too:

curl -fsSL https://raw.githubusercontent.com/platformio/platformio-core/develop/platformio/assets/system/99-platformio-udev.rules | sudo tee /etc/udev/rules.d/99-platformio-udev.rules

sudo service udev restart

sudo usermod -a -G dialout $USER
sudo usermod -a -G plugdev $USER
# now log out and log in

Any FTDI or Usb to TTL module should do.

1. Enter bootloader mode by first holding down the RESET and BOOT buttons and then release them in same order.

2. Click the Platformio: Upload button or run the pio run -t upload.

TODO

TODO