A central purge bucket, wago mount, and cover plate for the Voron 2.4
I created this mod because I switched to using the Euclid probe with a bed mount. I wanted to have a purge bucket but the existing purge bucket mod mounts over the extrusion and I wanted something in the center. I also wanted to use wago mounts, so I decided to combine the bucket mounting and the wago mount. The magnets and the cover are just for convenience and aesthetics.
Printing
- No supports needed
- No special orientation or settings
BOM
- 4x M3x8 socket head bolts for the wago mount
- 4x 10x5x3 magnets for the top of the wago mount and cover top/bottom
- 4x 6x3 magnets for the bucket and wago mount sides
Note
- I am small brain unga bunga (this is my first mod)
- I am voron noob (nothing has been tested properly)
- How do you set up the config to work with the purge bucket mod macros? I don't know. I'll figure it out.
Credits
- Wago mount (the part where the wagos clip in) was based on https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/deepfriedheroin/v2_bed_wagos
- The Bedpan name was kindly donated by Logan#2225