Initial commit

.vscode/tasks.json

@@ -0,0 +1,15 @@
+{
+ "version": "2.0.0",
+ "tasks": [
+ {
+ "type": "shell",
+ "label": "Run python file",
+ "command": "python",
+ "args": ["${file}"],
+ "options": {
+ "cwd": "${workspaceFolder}"
+ },
+ "problemMatcher": []
+ },
+ ]
+}

cube-ide-cmake-demo-proj/.project

@@ -0,0 +1,32 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+ <name>cube-ide-cmake-demo-proj</name>
+ <comment></comment>
+ <projects>
+ </projects>
+ <buildSpec>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+ <triggers>clean,full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ <buildCommand>
+ <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+ <triggers>full,incremental,</triggers>
+ <arguments>
+ </arguments>
+ </buildCommand>
+ </buildSpec>
+ <natures>
+ <nature>com.st.stm32cube.ide.mcu.MCUProjectNature</nature>
+ <nature>com.st.stm32cube.ide.mcu.MCUCubeProjectNature</nature>
+ <nature>org.eclipse.cdt.core.cnature</nature>
+ <nature>com.st.stm32cube.ide.mcu.MCUCubeIdeServicesRevAev2ProjectNature</nature>
+ <nature>com.st.stm32cube.ide.mcu.MCUAdvancedStructureProjectNature</nature>
+ <nature>com.st.stm32cube.ide.mcu.MCUSingleCpuProjectNature</nature>
+ <nature>com.st.stm32cube.ide.mcu.MCURootProjectNature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+ <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+ </natures>
+</projectDescription>

cube-ide-cmake-demo-proj/.vscode/.cortex-debug.peripherals.state.json

@@ -0,0 +1 @@
+[]

cube-ide-cmake-demo-proj/.vscode/.cortex-debug.registers.state.json

@@ -0,0 +1 @@
+[]

cube-ide-cmake-demo-proj/.vscode/c_cpp_properties.json

@@ -0,0 +1,17 @@
+{
+ "version": 4,
+ "configurations": [
+ {
+ "name": "STM32",
+ "includePath": [],
+ "defines": [],
+ "compilerPath": "",
+ "cStandard": "gnu17",
+ "cppStandard": "gnu++14",
+ "intelliSenseMode": "${default}",
+
+ /* Use this and all the include paths will come from CMake configuration instead */
+ "configurationProvider": "ms-vscode.cmake-tools"
+ }
+ ]
+}

cube-ide-cmake-demo-proj/.vscode/cmake-kits.json

@@ -0,0 +1,10 @@
+[
+ {
+ "name": "GCC arm-none-eabi - custom toolchain setup",
+ "compilers": {
+ "C": "arm-none-eabi-gcc",
+ "CXX": "arm-none-eabi-g++"
+ },
+ "toolchainFile": "gcc-arm-none-eabi.cmake"
+ }
+]

cube-ide-cmake-demo-proj/.vscode/launch.json

@@ -0,0 +1,32 @@
+{
+ // Use IntelliSense to learn about possible attributes.
+ // Hover to view descriptions of existing attributes.
+ // For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
+ "version": "0.2.0",
+ "configurations": [
+ {
+ "name": "Debug Microcontroller - STLink-V3",
+ "cwd": "${workspaceFolder}",
+ "type": "cortex-debug",
+ "executable": "${command:cmake.launchTargetPath}", //or fixed file path: build/stm32h735g-dk-led.elf
+ "request": "launch", //Use "attach" to connect to target w/o elf download
+ "servertype": "stlink",
+ "device": "STM32H735IG", //MCU used
+ "interface": "swd",
+ "serialNumber": "", //Set ST-Link ID if you use multiple at the same time
+ "runToMain": true,
+ "svdFile": "STM32H73x.svd", //SVD file to see reisters
+ "v1": false,
+ "showDevDebugOutput": true,
+
+ /* Will get automatically detected if STM32CubeIDE is installed to default directory
+ or it can be manually provided if necessary.. */
+ //"serverpath": "c:\\ST\\STM32CubeIDE_1.7.0\\STM32CubeIDE\\plugins\\com.st.stm32cube.ide.mcu.externaltools.stlink-gdb-server.win32_2.0.100.202109301221\\tools\\bin\\ST-LINK_gdbserver.exe",
+ //"armToolchainPath": "c:\\ST\\STM32CubeIDE_1.7.0\\STM32CubeIDE\\plugins\\com.st.stm32cube.ide.mcu.externaltools.gnu-tools-for-stm32.9-2020-q2-update.win32_2.0.0.202105311346\\tools\\bin",
+ //"stm32cubeprogrammer": "c:\\Program Files\\STMicroelectronics\\STM32Cube\\STM32CubeProgrammer\\bin",
+
+ /* If you use external loader, add additional arguments */
+ //"serverArgs": ["--extload", "path/to/ext/loader.stldr"],
+ }
+ ]
+}

cube-ide-cmake-demo-proj/.vscode/tasks.json

@@ -0,0 +1,56 @@
+{
+ "version": "2.0.0",
+ "tasks": [
+ {
+ "type": "cppbuild",
+ "label": "Build project",
+ "command": "cmake",
+ "args": ["--build", "\"build\""],
+ "options": {
+ "cwd": "${workspaceFolder}"
+ },
+ "problemMatcher": ["$gcc"],
+ "group": {
+ "kind": "build",
+ "isDefault": true
+ }
+ },
+ {
+ "type": "shell",
+ "label": "Re-build project",
+ "command": "cmake",
+ "args": ["--build", "\"build\"", "--clean-first", "-v"],
+ "options": {
+ "cwd": "${workspaceFolder}"
+ },
+ "problemMatcher": ["$gcc"],
+ },
+ {
+ "type": "shell",
+ "label": "Clean project",
+ "command": "cmake",
+ "args": ["--build", "\"build\"", "--target", "clean"],
+ "options": {
+ "cwd": "${workspaceFolder}"
+ },
+ "problemMatcher": []
+ },
+ {
+ "type": "shell",
+ "label": "Run CMake configuration",
+ "command": "cmake",
+ "args": [
+ "--no-warn-unused-cli",
+ "-DCMAKE_EXPORT_COMPILE_COMMANDS:BOOL=TRUE",
+ "-DCMAKE_BUILD_TYPE:STRING=Debug",
+ "-DCMAKE_TOOLCHAIN_FILE:FILEPATH=gcc-arm-none-eabi.cmake",
+ "-Bbuild",
+ "-G", "Ninja"
+ ],
+ "options": {
+ "cwd": "${workspaceFolder}"
+ },
+ "problemMatcher": []
+ }
+ ]
+}

cube-ide-cmake-demo-proj/CMakeLists.txt

@@ -0,0 +1,121 @@
+cmake_minimum_required(VERSION 3.22)
+
+# Setup compiler settings
+set(CMAKE_C_STANDARD 11)
+set(CMAKE_C_STANDARD_REQUIRED ON)
+set(CMAKE_C_EXTENSIONS ON)
+set(CMAKE_CXX_STANDARD 20)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
+set(CMAKE_CXX_EXTENSIONS ON)
+set(PROJ_PATH ${CMAKE_CURRENT_SOURCE_DIR})
+message("Build type: " ${CMAKE_BUILD_TYPE})
+
+#
+# Core project settings
+#
+project(stm32h735g-dk-led)
+enable_language(C CXX ASM)
+
+#
+# Core MCU flags, CPU, instruction set and FPU setup
+# Needs to be set properly for your MCU
+#
+set(CPU_PARAMETERS
+ -mthumb
+
+ # This needs attention to properly set for used MCU
+ -mcpu=cortex-m7
+ -mfpu=fpv5-d16
+ -mfloat-abi=hard
+)
+
+# Set linker script
+set(linker_script_SRC ${PROJ_PATH}/STM32H735IGKX_FLASH.ld)
+set(EXECUTABLE ${CMAKE_PROJECT_NAME})
+
+#
+# List of source files to compile
+#
+set(sources_SRCS
+ ${PROJ_PATH}/Core/Src/main.c
+ ${PROJ_PATH}/Core/Src/stm32h7xx_it.c
+ ${PROJ_PATH}/Core/Src/syscalls.c
+ ${PROJ_PATH}/Core/Src/sysmem.c
+ ${PROJ_PATH}/Core/Src/system_stm32h7xx.c
+ ${PROJ_PATH}/Core/Startup/startup_stm32h735igkx.s
+ ${PROJ_PATH}/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_exti.c
+ ${PROJ_PATH}/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_gpio.c
+ ${PROJ_PATH}/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_pwr.c
+ ${PROJ_PATH}/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_rcc.c
+ ${PROJ_PATH}/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_utils.c
+)
+
+#
+# Include directories
+#
+set(include_path_DIRS
+ ${PROJ_PATH}/Core/Inc
+ ${PROJ_PATH}/Drivers/STM32H7xx_HAL_Driver/Inc
+ ${PROJ_PATH}/Drivers/CMSIS/Device/ST/STM32H7xx/Include
+ ${PROJ_PATH}/Drivers/CMSIS/Include
+)
+
+#
+# Symbols definition
+#
+set(symbols_SYMB
+ "DEBUG"
+ "STM32H735xx"
+ "USE_FULL_LL_DRIVER"
+ "HSE_VALUE=25000000"
+)
+
+# Executable files
+add_executable(${EXECUTABLE} ${sources_SRCS})
+
+# Include paths
+target_include_directories(${EXECUTABLE} PRIVATE ${include_path_DIRS})
+
+# Project symbols
+target_compile_definitions(${EXECUTABLE} PRIVATE ${symbols_SYMB})
+
+# Compiler options
+target_compile_options(${EXECUTABLE} PRIVATE
+ ${CPU_PARAMETERS}
+ -Wall
+ -Wextra
+ -Wpedantic
+ -Wno-unused-parameter
+ # Full debug configuration
+ -Og -g3 -ggdb
+)
+
+# Linker options
+target_link_options(${EXECUTABLE} PRIVATE
+ -T${linker_script_SRC}
+ ${CPU_PARAMETERS}
+ -Wl,-Map=${CMAKE_PROJECT_NAME}.map
+ --specs=nosys.specs
+ -Wl,--start-group
+ -lc
+ -lm
+ -lstdc++
+ -lsupc++
+ -Wl,--end-group
+ -Wl,--print-memory-usage
+)
+
+# Execute post-build to print size
+add_custom_command(TARGET ${EXECUTABLE} POST_BUILD
+ COMMAND ${CMAKE_SIZE} $<TARGET_FILE:${EXECUTABLE}>
+)
+
+# Convert output to hex and binary
+add_custom_command(TARGET ${EXECUTABLE} POST_BUILD
+ COMMAND ${CMAKE_OBJCOPY} -O ihex $<TARGET_FILE:${EXECUTABLE}> ${EXECUTABLE}.hex
+)
+
+# Conver to bin file -> add conditional check?
+add_custom_command(TARGET ${EXECUTABLE} POST_BUILD
+ COMMAND ${CMAKE_OBJCOPY} -O binary $<TARGET_FILE:${EXECUTABLE}> ${EXECUTABLE}.bin
+)

cube-ide-cmake-demo-proj/Core/Inc/main.h

@@ -0,0 +1,97 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file : main.h
+ * @brief : Header for main.c file.
+ * This file contains the common defines of the application.
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2022 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_ll_rcc.h"
+#include "stm32h7xx_ll_crs.h"
+#include "stm32h7xx_ll_bus.h"
+#include "stm32h7xx_ll_system.h"
+#include "stm32h7xx_ll_exti.h"
+#include "stm32h7xx_ll_cortex.h"
+#include "stm32h7xx_ll_utils.h"
+#include "stm32h7xx_ll_pwr.h"
+#include "stm32h7xx_ll_dma.h"
+#include "stm32h7xx_ll_gpio.h"
+
+#if defined(USE_FULL_ASSERT)
+#include "stm32_assert.h"
+#endif /* USE_FULL_ASSERT */
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+#define LED1_Pin LL_GPIO_PIN_2
+#define LED1_GPIO_Port GPIOC
+#define LED2_Pin LL_GPIO_PIN_3
+#define LED2_GPIO_Port GPIOC
+#ifndef NVIC_PRIORITYGROUP_0
+#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bit for pre-emption priority,
+ 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bit for pre-emption priority,
+ 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority,
+ 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority,
+ 1 bit for subpriority */
+#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority,
+ 0 bit for subpriority */
+#endif
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */