feat(maw-mfrcsv): add option to write MAW flow reduction to csv

autotest/test_gwf_maw10.py

@@ -0,0 +1,323 @@
+"""
+MODFLOW 6 Autotest
+Test to confirm that the sum of rate-actual and maw-reduction observations
+is equal to the specified MAW extraction or injection pumping rate when
+reported using the MAW_FLOW_REDUCE_CSV option. Injection and extraction
+are tested for both MAW HEAD_LIMIT and RATE_SCALING options to reduce MAW
+flow rates from the specified input (requested) values.
+"""
+
+import os
+import pytest
+import sys
+import numpy as np
+
+try:
+    import pymake
+except:
+    msg = "Error. Pymake package is not available.\n"
+    msg += "Try installing using the following command:\n"
+    msg += " pip install https://github.com/modflowpy/pymake/zipball/master"
+    raise Exception(msg)
+
+try:
+    import flopy
+except:
+    msg = "Error. FloPy package is not available.\n"
+    msg += "Try installing using the following command:\n"
+    msg += " pip install flopy"
+    raise Exception(msg)
+
+from framework import testing_framework
+from simulation import Simulation
+
+ex = ["maw10a", "maw10b", "maw10c", "maw10d"]
+exdirs = []
+for s in ex:
+    exdirs.append(os.path.join("temp", s))
+
+# maw settings for runs a, b, c and d
+mawsetting_a = {
+        0: [
+            [0, "rate", -2000.0],
+            [0, "head_limit", -0.4],
+           ],
+        1: [
+            [0, "status", "inactive"],
+           ],
+    }
+mawsetting_b = {
+        0: [
+            [0, "rate", -2000.0],
+            [0, "rate_scaling", -1.4, 1.0],
+           ],
+        1: [
+            [0, "status", "inactive"],
+           ],
+    }
+mawsetting_c = {
+        0: [
+            [0, "rate", 2000.0],
+            [0, "head_limit", 0.4],
+           ],
+        1: [
+            [0, "status", "inactive"],
+           ],
+    }
+mawsetting_d = {
+        0: [
+            [0, "rate", 2000.0],
+            [0, "rate_scaling", 0.0, 1.0],
+           ],
+        1: [
+            [0, "status", "inactive"],
+           ],
+    }
+
+#simple single stress period without going inactive in 2nd stress period
+#mawsetting_a = [(0, "rate", -2000.0), (0, "head_limit", -0.4)]
+#mawsetting_b = [[(0, "rate", -2000.0), (0, "rate_scaling", -1.4, 1.0)], ["status", "inactive"]]
+#mawsetting_c = [[(0, "rate", 2000.0), (0, "head_limit", 0.4)], ["status", "inactive"]]
+#mawsetting_d = [[(0, "rate", 2000.0), (0, "rate_scaling", 0.0, 1.0)], ["status", "inactive"]]
+mawsettings = [mawsetting_a, mawsetting_b, mawsetting_c, mawsetting_d]
+
+
+def build_model(idx, dir):
+
+    nlay, nrow, ncol = 1, 101, 101
+    nper = 2
+    perlen = [500.0,500.0]
+    nstp = [50,50]
+    tsmult = [1.2,1.2]
+    delr = delc = 142.0
+    top = 0.0
+    botm = [-1000.0]
+    strt = 0.0
+    hk = 10.0
+
+    nouter, ninner = 100, 100
+    hclose, rclose, relax = 1e-6, 1e-6, 1.0
+
+    tdis_rc = []
+    for i in range(nper):
+        tdis_rc.append((perlen[i], nstp[i], tsmult[i]))
+
+    name = ex[idx]
+
+    # build MODFLOW 6 files
+    ws = dir
+    sim = flopy.mf6.MFSimulation(sim_name=name, sim_ws=ws)
+
+    # create tdis package
+    tdis = flopy.mf6.ModflowTdis(
+        sim, time_units="DAYS", nper=nper, perioddata=tdis_rc
+    )
+
+    # create gwf model
+    gwf = flopy.mf6.MFModel(
+        sim,
+        model_type="gwf6",
+        modelname=name,
+        model_nam_file="{}.nam".format(name),
+    )
+
+    # create iterative model solution and register the gwf model with it
+    ims = flopy.mf6.ModflowIms(
+        sim,
+        print_option="SUMMARY",
+        outer_dvclose=hclose,
+        outer_maximum=nouter,
+        under_relaxation="NONE",
+        inner_maximum=ninner,
+        inner_dvclose=hclose,
+        rcloserecord=rclose,
+        linear_acceleration="CG",
+        scaling_method="NONE",
+        reordering_method="NONE",
+        relaxation_factor=relax,
+    )
+    sim.register_ims_package(ims, [gwf.name])
+
+    dis = flopy.mf6.ModflowGwfdis(
+        gwf,
+        nlay=nlay,
+        nrow=nrow,
+        ncol=ncol,
+        delr=delr,
+        delc=delc,
+        top=top,
+        botm=botm,
+        idomain=1,
+        filename="{}.dis".format(name),
+    )
+
+    # initial conditions
+    ic = flopy.mf6.ModflowGwfic(gwf, strt=strt, filename="{}.ic".format(name))
+
+    # node property flow
+    npf = flopy.mf6.ModflowGwfnpf(
+        gwf,
+        save_flows=True,
+        icelltype=1,
+        k=hk,
+        k33=hk,
+        filename="{}.npf".format(name),
+    )
+
+    # storage
+    sto = flopy.mf6.ModflowGwfsto(
+        gwf,
+        save_flows=True,
+        iconvert=0,
+        ss=1.0e-5,
+        sy=0.1,
+        steady_state={0: False},
+        transient={0: True},
+        filename="{}.sto".format(name),
+    )
+
+    # MAW
+    opth = "{}.maw.obs".format(name)
+    wellbottom = -1000
+    wellrecarray = [[0, 0.15, wellbottom, 0.0, "THIEM", 1]]
+    wellconnectionsrecarray = [[0, 0, (0, 50, 50), 0.0, wellbottom, 0.0, 0.0]]
+    wellperiodrecarray = mawsettings[idx]
+    mawo_dict = {}
+    mawo_dict["{}.maw.obs.csv".format(name)] = [
+        ("m1head", "head", (0,)),
+        ("m1rate", "rate", (0,)),
+    ]  # is this index one-based? Not if in a tuple
+    maw = flopy.mf6.ModflowGwfmaw(
+        gwf,
+        filename="{}.maw".format(name),
+        print_input=True,
+        print_head=True,
+        print_flows=True,
+        save_flows=True,
+        observations=mawo_dict,
+        packagedata=wellrecarray,
+        connectiondata=wellconnectionsrecarray,
+        perioddata=wellperiodrecarray,
+        mfrcsv_filerecord=f"{name}.maw-reduction.csv",
+    )
+
+    # output control
+    oc = flopy.mf6.ModflowGwfoc(
+        gwf,
+        budget_filerecord="{}.cbc".format(name),
+        head_filerecord="{}.hds".format(name),
+        headprintrecord=[
+            ("COLUMNS", ncol, "WIDTH", 15, "DIGITS", 6, "GENERAL")
+        ],
+        saverecord=[("HEAD", "ALL")],
+        printrecord=[("HEAD", "ALL"), ("BUDGET", "ALL")],
+        filename="{}.oc".format(name),
+    )
+
+    # head observations
+    obs_data0 = [("head_well_cell", "HEAD", (0, 0, 0))]
+    obs_recarray = {"{}.obs.csv".format(name): obs_data0}
+    obs = flopy.mf6.ModflowUtlobs(
+        gwf,
+        pname="head_obs",
+        filename="{}.obs".format(name),
+        digits=15,
+        print_input=True,
+        continuous=obs_recarray,
+    )
+
+    return sim, None
+
+#2 tests to perform here:
+#1. within the .maw-reduction.csv file, do values of actual + reduction = requested?
+#2. do the values in .maw-reduction.csv file match with the .maw.obs.csv file at each time
+#  (and all are reduction times present in the obs file)?
+def eval_mawred(sim):
+    print("evaluating MAW flow reduction outputs...")
+
+    # MODFLOW 6 maw results
+    idx = sim.idxsim
+    name = ex[idx]
+    fpthobs = os.path.join(sim.simpath, "{}.maw.obs.csv".format(name))
+    fpthmfr = os.path.join(sim.simpath, "{}.maw-reduction.csv".format(name))
+    try:
+        tcobs = np.genfromtxt(fpthobs, names=True, delimiter=",")
+    except:
+        assert False, 'could not load data from "{}"'.format(fpthobs)
+    try:
+        tcmfr = np.genfromtxt(fpthmfr, names=True, delimiter=",", deletechars="")
+    except:
+        assert False, 'could not load data from "{}"'.format(fpthmfr)
+
+    #test 1: does rate-requested = rate-actual + maw-reduction at each time in the .maw.reduced.csv?
+    for rowmfr in tcmfr:
+        v1 = rowmfr["rate-requested"]
+        v2 = rowmfr["rate-actual"] + rowmfr["maw-reduction"]
+        errmsg = f"MAW flow reduction output: requested rate must equal actual rate plus reduced rate.\n"
+        errmsg += f"{v1} /= {v2}"
+        assert np.allclose(v1, v2), errmsg
+
+    #test 2: do values of rate-actual in .maw.reduced.csv equal those flow values reported in .maw.obs.csv?
+    #        (and are there matching times?)
+    for rowmfr in tcmfr:
+        timevalmfr = rowmfr["time"]
+        actvalmfr = rowmfr["rate-actual"]
+        msgtime = (
+          "There should be a matching time in the maw.obs.csv file for each "
+          "time in the maw.reduce.csv file, but no match was found for "
+          "time = {} in the maw.obs.csv file".format(timevalmfr)
+        )
+        blnFoundTimeMatch = False
+        for rowobs in tcobs:
+            timevalobs = rowobs["time"]
+            if np.isclose(timevalmfr,timevalobs):
+                blnFoundTimeMatch = True
+                actvalobs = rowobs["M1RATE"]
+                msgval = (
+                  "The maw.obs.csv file rate-actual value of {} should have "
+                  "matched the maw.reduce.csv file rate-actual value of {} "
+                  "at time {}".format(actvalobs, actvalmfr, timevalobs)
+                )
+                break
+        assert blnFoundTimeMatch, msgtime
+        assert np.isclose(actvalmfr,actvalobs), msgval
+
+    return
+
+
+# - No need to change any code below
+@pytest.mark.parametrize(
+    "idx, dir",
+    list(enumerate(exdirs)),
+)
+def test_mf6model(idx, dir):
+    # initialize testing framework
+    test = testing_framework()
+
+    # build the models
+    test.build_mf6_models(build_model, idx, dir)
+
+    # run the test model
+    test.run_mf6(Simulation(dir, exfunc=eval_mawred, idxsim=idx))
+
+
+def main():
+    # initialize testing framework
+    test = testing_framework()
+
+    # build the models
+    # run the test model
+    for idx, dir in enumerate(exdirs):
+        test.build_mf6_models(build_model, idx, dir)
+        sim = Simulation(dir, exfunc=eval_mawred, idxsim=idx)
+        test.run_mf6(sim)
+
+    return
+
+
+if __name__ == "__main__":
+    # print message
+    print("standalone run of {}".format(os.path.basename(__file__)))
+
+    # run main routine
+    main()

doc/ReleaseNotes/ReleaseNotes.tex

@@ -228,7 +228,7 @@ \section{Changes Introduced in this Release}
 
 	%\underline{ADVANCED STRESS PACKAGES}
 	%\begin{itemize}
-	%	\item xxx
+	%	\item Add new MAW\_FLOW\_REDUCE\_CSV option for the Multi-Aquifer Well (MAW) Package.  If activated, then this option will result in information being written to a comma-separated value file for each multi-aquifer well and for each time step in which the extraction or injection rate is reduced by the program.  Information is not written for multi-aquifer wells in which the extraction or injection rate is equal to the user-specified extraction or injection rate.
 	%	\item xxx
 	%	\item xxx
 	%\end{itemize}

doc/mf6io/mf6ivar/dfn/gwf-maw.dfn

@@ -201,6 +201,39 @@ optional true
 longname shutdown kappa
 description value that defines the weight applied to discharge rate for wells that limit the water level in a discharging well (defined using the HEAD\_LIMIT keyword in the stress period data). SHUTDOWN\_KAPPA is used to control discharge rate oscillations when the flow rate from the aquifer is less than the specified flow rate from the aquifer to the well. Values range between 0.0 and 1.0, and larger values increase the weight applied to the well discharge rate. The HEAD\_LIMIT option has been included to facilitate backward compatibility with previous versions of MODFLOW but use of the RATE\_SCALING option instead of the HEAD\_LIMIT option is recommended. By default, SHUTDOWN\_KAPPA is 0.0001.
 
+block options
+name mfrcsv_filerecord
+type record maw_flow_reduce_csv fileout mfrcsvfile
+shape
+reader urword
+tagged true
+optional true
+longname
+description
+
+block options
+name maw_flow_reduce_csv
+type keyword
+shape
+in_record true
+reader urword
+tagged true
+optional false
+longname budget keyword
+description keyword to specify that record corresponds to the output option in which a new record is written for each multi-aquifer well and for each time step in which the user-requested extraction or injection rate is reduced by the program.
+
+block options
+name mfrcsvfile
+type string
+preserve_case true
+shape
+in_record true
+reader urword
+tagged false
+optional false
+longname file keyword
+description name of the comma-separated value (CSV) output file to write information about multi-aquifer well extraction or injection rates that have been reduced by the program. Entries are only written if the extraction or injection rates are reduced.
+
 block options
 name ts_filerecord
 type record ts6 filein ts6_filename

doc/mf6io/mf6ivar/md/mf6ivar.md

@@ -496,6 +496,9 @@
 | GWF | MAW | OPTIONS | FLOWING_WELLS | KEYWORD | keyword that activates the flowing wells option for the multi-aquifer well package. |
 | GWF | MAW | OPTIONS | SHUTDOWN_THETA | DOUBLE PRECISION | value that defines the weight applied to discharge rate for wells that limit the water level in a discharging well (defined using the HEAD\_LIMIT keyword in the stress period data). SHUTDOWN\_THETA is used to control discharge rate oscillations when the flow rate from the aquifer is less than the specified flow rate from the aquifer to the well. Values range between 0.0 and 1.0, and larger values increase the weight (decrease under-relaxation) applied to the well discharge rate. The HEAD\_LIMIT option has been included to facilitate backward compatibility with previous versions of MODFLOW but use of the RATE\_SCALING option instead of the HEAD\_LIMIT option is recommended. By default, SHUTDOWN\_THETA is 0.7. |
 | GWF | MAW | OPTIONS | SHUTDOWN_KAPPA | DOUBLE PRECISION | value that defines the weight applied to discharge rate for wells that limit the water level in a discharging well (defined using the HEAD\_LIMIT keyword in the stress period data). SHUTDOWN\_KAPPA is used to control discharge rate oscillations when the flow rate from the aquifer is less than the specified flow rate from the aquifer to the well. Values range between 0.0 and 1.0, and larger values increase the weight applied to the well discharge rate. The HEAD\_LIMIT option has been included to facilitate backward compatibility with previous versions of MODFLOW but use of the RATE\_SCALING option instead of the HEAD\_LIMIT option is recommended. By default, SHUTDOWN\_KAPPA is 0.0001. |
+| GWF | MAW | OPTIONS | MAW_FLOW_REDUCE_CSV | KEYWORD | keyword to specify that record corresponds to the output option in which a new record is written for each multi-aquifer well and for each time step in which the user-requested extraction or injection rate is reduced by the program. |
+| GWF | MAW | OPTIONS | FILEOUT | KEYWORD | keyword to specify that an output filename is expected next. |
+| GWF | MAW | OPTIONS | MFRCSVFILE | STRING | name of the comma-separated value (CSV) output file to write information about multi-aquifer well extraction or injection rates that have been reduced by the program. Entries are only written if the extraction or injection rates are reduced. |
 | GWF | MAW | OPTIONS | TS6 | KEYWORD | keyword to specify that record corresponds to a time-series file. |
 | GWF | MAW | OPTIONS | FILEIN | KEYWORD | keyword to specify that an input filename is expected next. |
 | GWF | MAW | OPTIONS | TS6_FILENAME | STRING | defines a time-series file defining time series that can be used to assign time-varying values. See the ``Time-Variable Input'' section for instructions on using the time-series capability. |

doc/mf6io/mf6ivar/tex/gwf-maw-desc.tex

@@ -39,6 +39,12 @@
 
 \item \texttt{shutdown\_kappa}---value that defines the weight applied to discharge rate for wells that limit the water level in a discharging well (defined using the HEAD\_LIMIT keyword in the stress period data). SHUTDOWN\_KAPPA is used to control discharge rate oscillations when the flow rate from the aquifer is less than the specified flow rate from the aquifer to the well. Values range between 0.0 and 1.0, and larger values increase the weight applied to the well discharge rate. The HEAD\_LIMIT option has been included to facilitate backward compatibility with previous versions of MODFLOW but use of the RATE\_SCALING option instead of the HEAD\_LIMIT option is recommended. By default, SHUTDOWN\_KAPPA is 0.0001.
 
+\item \texttt{MAW\_FLOW\_REDUCE\_CSV}---keyword to specify that record corresponds to the output option in which a new record is written for each multi-aquifer well and for each time step in which the user-requested extraction or injection rate is reduced by the program.
+
+\item \texttt{FILEOUT}---keyword to specify that an output filename is expected next.
+
+\item \texttt{mfrcsvfile}---name of the comma-separated value (CSV) output file to write information about multi-aquifer well extraction or injection rates that have been reduced by the program. Entries are only written if the extraction or injection rates are reduced.
+
 \item \texttt{TS6}---keyword to specify that record corresponds to a time-series file.
 
 \item \texttt{FILEIN}---keyword to specify that an input filename is expected next.